|
If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
Datasheet File OCR Text: |
Analog Microelectronics, Inc. AME8806 / 8809 / 8842 600mA CMOS LDO n General Description The AME8806/8809 family of positive, linear regulators feature low quiescent current (30A typ.) with low dropout voltage, making them ideal for battery applications. The space-saving SO-8 package is attractive for "Pocket" and "Hand Held" applications. These rugged devices have both Thermal Shutdown, and Current Fold-back to prevent device failure under the "Worst" of operating conditions. In applications requiring a low noise, regulated supply, place a 1000 pF capacitor between Bypass and ground. The AME8806/8809 is stable with an output capacitance of 2.2F or greater. n Features l l l l l l l l l l l l Very Low Dropout Voltage Guaranteed 600mA Output Accurate to within 1.5% 30A Quiescent Current Over-Temperature Shutdown Current Limiting Short Circuit Current Fold-back Noise Reduction Bypass Capacitor Power-Saving Shutdown Mode Space-Saving SO-8 Package Factory Pre-set Output Voltages Low Temperature Coefficient n Applications l l n Functional Block Diagram IN Overcurrent Shutdown l l l l l OUT Instrumentation Portable Electronics Wireless Devices Cordless Phones PC Peripherals Battery Powered Widgets Electronic Scales Thermal Shutdown n Typical Application IN IN OUT OUT EN BYP AMP 5V AME8806 AME8809 GND EN R1 C1 1F BYP C2 1F C3 2.2 F V ref=1.215V R2 GND 1 Analog Microelectronics, Inc. AME8806 / 8809 / 8842 600mA CMOS LDO n Pin Configuration SO-8 Top View SO-8 Top View IN GND GND EN OUT GND GND BYP EN IN OUT BP GND GND GND GND AME8806 AME8809 PG IN OUT EN GND GND GND GND AME8842 2 Analog Microelectronics, Inc. AME8806 / 8809 / 8842 600mA CMOS LDO n Ordering Information Part Number AME8806AEHA Marking 8806 AEHA yyww 8806 BEHA yyww 8806 CEHA yyww 8806 DEHA yyww 8806 EEHA yyww 8806 FEHA yyww 8806 GEHA yyww 8806 HEHA yyww 8806 IEHA yyww 8806 JEHA yyww 8806 KEHA yyww 8806 LEHA yyww 8806 MEHA yyww 8806 NEHA yyww 8806 OEHA yyww Output 3.3V Package SO-8 Operating Temp. -40OC to +85OC AME8806BEHA 3.0V SO-8 -40OC to +85OC AME8806CEHA 2.8V SO-8 -40OC to +85OC AME8806DEHA 2.5V SO-8 -40OC to +85OC AME8806EEHA 3.8V SO-8 -40OC to +85OC AME8806FEHA 3.6V SO-8 -40OC to +85OC AME8806GEHA 3.5V SO-8 -40OC to +85OC AME8806HEHA 2.7V SO-8 -40OC to +85OC AME8806IEHA 3.4V SO-8 -40OC to +85OC AME8806JEHA 2.85V SO-8 -40OC to +85OC AME8806KEHA 3.7V SO-8 -40OC to +85OC AME8806LEHA 1.5V SO-8 -40OC to +85OC AME8806MEHA 1.8V SO-8 -40OC to +85OC AME8806NEHA 2.9V SO-8 -40OC to +85OC AME8806OEHA 3.1V SO-8 -40OC to +85OC 3 Analog Microelectronics, Inc. AME8806 / 8809 / 8842 600mA CMOS LDO n Ordering Information Part Number AME8809AEHA Marking 8809 AEHA yyww 8809 BEHA yyww 8809 CEHA yyww 8809 DEHA yyww 8809 EEHA yyww 8809 FEHA yyww 8809 GEHA yyww 8809 HEHA yyww 8809 IEHA yyww 8809 JEHA yyww 8809 KEHA yyww 8809 LEHA yyww 8809 MEHA yyww 8809 NEHA yyww 8809 OEHA yyww Output 3.3V Package SO-8 Operating Temp. -40OC to +85OC AME8809BEHA 3.0V SO-8 -40OC to +85OC AME8809CEHA 2.8V SO-8 -40OC to +85OC AME8809DEHA 2.5V SO-8 -40OC to +85OC AME8809EEHA 3.8V SO-8 -40OC to +85OC AME8809FEHA 3.6V SO-8 -40OC to +85OC AME8809GEHA 3.5V SO-8 -40OC to +85OC AME8809HEHA 2.7V SO-8 -40OC to +85OC AME8809IEHA 3.4V SO-8 -40OC to +85OC AME8809JEHA 2.85V SO-8 -40OC to +85OC AME8809KEHA 3.7V SO-8 -40OC to +85OC AME8809LEHA 1.5V SO-8 -40OC to +85OC AME8809MEHA 1.8V SO-8 -40OC to +85OC AME8809NEHA 2.9V SO-8 -40OC to +85OC AME8809OEHA 3.1V SO-8 -40OC to +85OC Please consult AME sales office or authorized Rep./Distributor 4 for other output voltage and package type availability. Analog Microelectronics, Inc. AME8806 / 8809 / 8842 600mA CMOS LDO n Ordering Information P art N u m b e r A M E 8842A E HA M ark in g 8842 A E HA y y ww 8842 B E HA y y ww 8842 CE HA y y ww 8842 DE HA y y ww 8842 E E HA y y ww 8842 F E HA y y ww 8842 G E HA y y ww 8842 HE HA y y ww 8842 IE HA y y ww 8842 JE HA y y ww 8842 K E HA y y ww 8842 LE HA y y ww 8842 M E HA y y ww 8842 NE HA y y ww 8842 O E HA y y ww O u tp u t 3.3V P ac k ag e S O -8 O p e ratin g T em p . -40 O C to + 85 O C A M E 8842B E HA 3.0V S O -8 -40 O C to + 85 O C A M E 8842CE HA 2.8V S O -8 -40 O C to + 85 O C A M E 8842DE HA 2.5V S O -8 -40 O C to + 85 O C A M E 8842E E HA 3.8V S O -8 -40 O C to + 85 O C A M E 8842F E HA 3.6V S O -8 -40 O C to + 85 O C A M E 8842G E HA 3.5V S O -8 -40 O C to + 85 O C A M E 8842HE HA 2.7V S O -8 -40 O C to + 85 O C A M E 8842IE HA 3.4V S O -8 -40 O C to + 85 O C A M E 8842JE HA 2.85V S O -8 -40 O C to + 85 O C A M E 8842K E HA 3.7V S O -8 -40 O C to + 85 O C A M E 8842LE HA 1.5V S O -8 -40 O C to + 85 O C A M E 8842M E HA 1.8V S O -8 -40 O C to + 85 O C A M E 8842NE HA 2.9V S O -8 -40 O C to + 85 O C A M E 8842O E HA 3.1V S O -8 -40 O C to + 85 O C P leas e c ons ult A M E s ales offic e or authoriz ed Rep./Dis tributor for other output voltage and pac k age ty pe availability . 5 Analog Microelectronics, Inc. AME8806 / 8809 / 8842 600mA CMOS LDO n Absolute Maximum Ratings Parameter Input Voltage Output Current Input, Output Voltage ESD Classification Maximum 8 Unit V A V P D / (V IN - V O) GND - 0.3 to V IN + 0.3 B n Recommended Operating Conditions Parameter Ambient Temperature Range Junction Temperature Rating -40 to +85 -40 to +125 Unit o C C o n Thermal Information Para meter Thermal Resistance (ja) Internal Power Dissipation (P D ) ( T = 100oC) Maximum Junction Temperature Maximum Lead Temperature ( 10 Sec) Max imum 123.7 810 150 300 o Unit C/W mW o C C o Caution: Stress above the listed absolute rating may cause permanent damage to the device 6 Analog Microelectronics, Inc. AME8806 / 8809 / 8842 600mA CMOS LDO n Electrical Specifications TA = 25 o C unless otherwise noted Parameter Input Voltage Output Voltage Accuracy Symbol VIN VO IO=600mA VO=VONOM -2.0% IO=1mA 1.5V o o Units V % Dropout Voltage VDROPOUT mV IO=1mA to 600mA C C ppm/oC Output Voltage Noise eN VEH VEL IEH IEL ISD EN Input Threshold VIN=2.7V to 8V VIN=2.7V to 8V VEN=VIN, VIN=2.7V to 8V VEN=0V, VIN =2.7V to 8V VIN=5V, VO=0V, VEN 7 Analog Microelectronics, Inc. AME8806 / 8809 / 8842 600mA CMOS LDO n Detailed Description The AME8806/8809 family of CMOS regulators contain a PMOS pass transistor, voltage reference, error amplifier, over-current protection, and thermal shutdown. The P-channel pass transistor receives data from the error amplifier, over-current shutdown, and thermal protection circuits. During normal operation, the error amplifier compares the output voltage to a precision reference. Over-current and Thermal shutdown circuits become active when the junction temperature exceeds 150oC, or the current exceeds 600mA. During thermal shutdown, the output voltage remains low. Normal operation is restored when the junction temperature drops below 120oC. The AME8806/8809 switches from voltage mode to current mode when the load exceeds the rated output current. This prevents over-stress. The AME8806/8809 also incorporates current foldback to reduce power dissipation when the output is short circuited. This feature becomes active when the output drops below 0.8 volts, and reduces the current flow by 65%. Full current is restored when the voltage exceeds 0.8 volts. A third capacitor can be connected between the BYPASS pin and GND. This capacitor can be a low cost Polyester Film variety between the value of 0.001 ~ 0.01F. A larger capacitor improves the AC ripple rejection, but also makes the output come up slowly. This "Soft" turn-on is desirable in some applications to limit turn-on surges. All capacitors should be placed in close proximity to the pins. A "Quiet" ground termination is desirable. This can be achieved with a "Star" connection. n Enable The Enable pin normally floats high. When actively, pulled low, the PMOS pass transistor shuts off, and all internal circuits are powered down. In this state, the quiescent current is less than 1A. This pin behaves much like an electronic switch. n External Capacitors The AME8806/8809 is stable with an output capacitor to ground of 2.2F or greater. Ceramic capacitors have the lowest ESR, and will offer the best AC performance. Conversely, Aluminum Electrolytic capacitors exhibit the highest ESR, resulting in the poorest AC response. Unfortunately, large value ceramic capacitors are comparatively expensive. One option is to parallel a 0.1F ceramic capacitor with a 10F Aluminum Electrolytic. The benefit is low ESR, high capacitance, and low overall cost. A second capacitor is recommended between the input and ground to stabilize Vin. The input capacitor should be at least 0.1F to have a beneficial effect. 8 Analog Microelectronics, Inc. AME8806 / 8809 / 8842 600mA CMOS LDO Ground Current vs. Input Voltage 45 40 Load Step ( 1mA-600mA) Vo(10mV/DIV) Ground Current (A) 35 30 25 20 15 10 5 0 0 1 2 3 4 85 O C Output C L =2.2F CIN=2.2F 25 O C IL(200mA/DIV) IL o a d 0 TIME ( 20mS/DIV) 5 6 7 8 Input Voltage (V) Drop Out Voltage vs. Output Voltage 0.3 Power Supply Rejection Ratio 0 -10 Drop Out Voltage (V) 0.25 0.2 0.15 0.1 0.05 0 2 2.5 3 3.5 IL O A D = 6 0 0 m A -20 PSRR (dB) -30 -40 -50 -60 -70 C L =2.2 F Tantalum C B Y P =0 100mA 100mA 10mA 100 A 100 A 1mA 4 4.5 5 5.5 -80 1.0E+01 1.0E+03 1.0E+05 1.0E+07 Output Voltage (V) Frequency (Hz) Safe Operating Area -20 600 Power Supply Rejection Ratio -30 Output Current (mA) C L =2.2F Tantalum C B Y P =1000pF 100mA 1mA -40 PSRR (dB) 100 -50 -60 -70 100mA 10mA 100A 100A 10 0.1 1.0 8.0 -80 1.0E+01 1.0E+03 1.0E+05 1.0E+07 Input-Output Voltage Differential (V) Frequency (Hz) 9 Analog Microelectronics, Inc. AME8806 / 8809 / 8842 600mA CMOS LDO Noise Measurement Overtemperature Shutdown I OUT (200mA/DIV) Vo (1mV/ DIV) CL = 2.2F NO FILTER 0 R L O A D =6.6 VOUT (1V/DIV) 0 TIME (20mS/DIV) TIME (0.5Sec/DIV) Current Limit Response IOUT (200mA/DIV) VOUT (1V/DIV) I OUT (200mV/DIV) Short Circuit Response C L O A D =2.2F C IN = 1F R L O A D < 1 0 0 m TIME (2mS/DIV) V OUT (1V/DIV) C L O A D =2.2F C I N =1.0F R L O A D =3.3 V O U T N O M =3.3V TIME (2mS/DIV) Chip Enable Transient Response Enable (2V/DIV) Line Transient Response VIN(1V/DIV) C L =2F R L =10 0 Output (1V/DIV) 0 TIME ( 1mS/DIV) VOUT (10mV/DIV) C L O A D =2.2F IL O A D = 1 m A V O U T D C =3.3V V I N D C =4.5V TIME (200mS/DIV) 10 Analog Microelectronics, Inc. AME8806 / 8809 / 8842 600mA CMOS LDO n Package Dimension SO-8 SYMBOLS A A1 A2 B C D E e H L y MILLIMETERS MIN MAX 1.35 1.75 0.10 0.25 -- 0.33 0.19 4.80 3.80 -- 5.80 0.40 -- 0 INCHES MIN MAX 0.053 0.069 0.004 0.010 -- 0.013 0.007 0.189 0.150 -- 0.228 0.016 0 -- 0.51 0.25 5.00 4.00 -- 6.20 1.27 0.10 8 -- 0.020 0.010 0.1970 0.157 -- 0.244 0.050 0.004 8 11 www.analogmicro.com E-Mail: info@analogmicro.com Life Support Policy: These products of Analog Microelectronics, Inc. are not authorized for use as critical components in lifesupport devices or systems, without the express written approval of the president of Analog Microelectronics, Inc. Analog Microelectronics, Inc. reserves the right to make changes in the circuitry and specifications of its devices and advises its customers to obtain the latest version of relevant information. (c) Analog Microelectronics, Inc., August 2001 Document: 2006-DS8806/8809-D Corporate Headquarters Analog Microelectronics, Inc. 3100 De La Cruz Blvd. Suite 201 Santa Clara, CA. 95054-2046 Tel : (408) 988-2388 Fax: (408) 988-2489 Asia Pacific Headquarters AME, Inc. 2F, 187 Kang-Chien Road, Nei-Hu District Taipei 114, Taiwan, R.O.C. Tel : 886 2 2627-8687 Fax : 886 2 2659-2989 |
Price & Availability of AME8809 |
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |