View TDA4480C_314120.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

TELEFUNKEN Semiconductors
TDA 4480-C
Multi standard quasi parallel-sound processor for TV-sets
Technology: Bipolar Features
D High signal sensitivity D Simple filter components configuration and few external D ESD protected D Alignment free AM demodulator for the standard L D VCO controlled mixer stage converts intercarrier frequencies of different standards into a preferred sound IF D Optimum tuning characteristic
D Processing of two carrier stereo signals D Low intercarrier distortions Case: 20-pin dual inline plastic
Figure 1 Block diagram
Preliminary Information
1
TDA 4480-C
Pin Configuration
Pin 1-2 3 4 5 6 7 8-9 10 Symbol Function Vision-IF-carrier input Intercarrier input 5.74 MHz AGC time constant Intercarrier output 5.74 MHz Standard switch AF output 1 Phase tank circuit 5.74 MHz VC0 tank circuit Pin 11 12-13 14 15 16 17 18-19 20 Symbol
TELEFUNKEN Semiconductors
Function Ground Phase tank circuit 5.5 MHz AF output 2 Intercarrier output 5.5 MHz Supply voltage Intercarrier input 5.5 MHz Sound-IF-carrier input n.c.
Circuit Description
The integrated circuit allows the high quality processing of sound carrier for different TV standards. The circuit requires separate vision and audio carrier inputs. It delivers the output audio signal for mono, two channels or stereo applications. Audio carrier signal (simple or double carrier, FM and AM) is applied via three stage AGC controlled broad band amplifier which delivers regulated output signal for two mixing stages. One mixer works for AM-demodulation and AGC-function whereas the second mixer produces the sound intercarrier IF-frequencies (5.5/5.74 MHz). Vision carrier signal for the intercarrier generation is delivered from the demodulator tank of the video IF circuit (TDA 4439, TDA 4453). It is then matched via a limiter stage to the FM intercarrier mixer. FM-sound-IF-carrier reaches the quadrature demodulator via the selection circuit and the following limiter amplifier. The final audio signal is supplied to the low ohmic output (Pin 7,14) with low pass filter character. There is a switchable converter for different audio standards (4.5, 6.00 and 6.5 MHZ), which mixes the sound 1P-signal properly e.g. at 5.5 MHz. The VC0 (Pin 10) must be controlled across the sound output (Pin 7) which includes AFC-function. Sound signal at the AM-modulation is introduced via standard switch in the first sound channel, whereas the intercarrier, converter section and both FM demodulators are switched off. In case of sound IF converter operation, the second sound channel and the AM-section are switched off. The standard mode is controlled by a tristate signal on Pin 6.
Absolute Maximum Ratings
Reference point Pin 11, unless otherwise specified Parameters Supply voltage Supply current External voltage Pin 16 Pin 16 Pin 6 Pin 1, 2, 3, 4, 5, 7, 8, 9, 12, 13, 14, 15, 17, 18, 19 Symbol VS IS Vext Vext Ptot Tj Tamb Tstg Value 10 to 13.5 80 VS 6 1 125 - 25 to + 70 - 25 to + 125 Unit V mA V V W
_C _C _C
Power dissipation (in soldered position) Junction temperature Ambient temperature range Storage temperature range
2
Preliminary Information
TELEFUNKEN Semiconductors
TDA 4480-C
Symbol RthJA Value 60 Unit K/W
Thermal Resistance
Parameters Junction ambient
Electrical Characteristics
V5 = 12 V, Tamb = 25 _C, reference point pin 11, fPC = 38.9 MHz, fSC1 = 33.4 MHz, fSC2 = 33.1578 MHz, SC1/SC2 = 7 dB, unless otherwise specified Parameters Supply voltage range Supply current Output DC voltage Standard switching voltage Test Conditions / Pin Pin 16 FM-operation, AM-operation, Pin 16 Pin 16 Pin 7,14 Symbol VS IS IS V0 V V V I v v v 1.7 0 3.5 5 Min 10 Type 65 40 3.5 2.2 2.7 1.5 VS 20 20 Max 13.5 Unit V mA mA V V V V mA mV mV mV dB mVeff "1 0.5 1.5 3 3.0 dB % % kW
Standard B/G, Pin 6 Standard L, Pin 6 converter operation Pin 6 Standard switching current V6 x 5 V Pin 6 Picture carrier input voltage Pin 1,2 Min. sound carrier input 5.5 MHz-output Pin 18,19 voltage SC1 signal -3 dB Max. sound carrier input Pin 18,19 voltage SC1 AGC range Audio output voltage FM-deviation = 30 kHz m = 80 % Pin 7,14 Audio voltage difference Pin 7,14 between both outputs Harmonic distortion AMfmod = 1 kHz, Pin 7,14 operation FM-deviation = 30 kHz Harmonic distortion AMfmod = 1 kHz, Pin 7 operation m = 80 %, v18-19 = 10 mV Min. output load Pin 7,14 Signal to noise ratio (Standard B/G) according to CCIR 468-2 specifications, SC1: v18-19 = 10 mV, PC: v1-2 = 10 mV, prelimited demodulator picture carrier signal from TDA 4453 reference signal: fmod = 1 kHz, FM deviation = 30 kHz Black burst 1. channel/2. channel 1) Grid test signal 1. channel/2. channel 1) Converter DC voltage Tuning range Input resistance Input capacity Pin 7/14 Pin 7/14
10 50 100 65 500
v v d d R
(S=N)/N (S=N)/N
62/60 50/48
dB dB
V6 y 3.5 V
Pin 10 Pin 10 Pin 10 Pin 10
V10 f R C
2.7 9 100 12 13
V MHz kW pF
Preliminary Information
3
TDA 4480-C
Parameters Test Conditions / Pin Signal to noise ratio (Standard B/G) according to CCIR 468-2 specifications, SC1: v18-19 = 10 mV, PC: v1-2 = 10 mV, prelimited demodulator picture carrier signal from TDA 4453 reference signal: fmod = 1 kHz, FM deviation = 30 kHz Black burst 1. channel/2. channel 1) Grid test signal 1. channel/2. channel 1) Converter DC voltage V6 y 3.5 V Tuning range Input resistance Input capacity 1) Standard B/G IF-modulated FBAS-signal Pin 7/14 Pin 7/14 Symbol
TELEFUNKEN Semiconductors
Min Type Max Unit
(S=N)/N (S=N)/N
62/60 50/48
dB dB
Pin 10 Pin 10 Pin 10 Pin 10
V10 f R C
2.7 9 100 12 13
V MHz kW pF
Figure 2: Test circuit
4
Preliminary Information
TELEFUNKEN Semiconductors
TDA 4480-C
Pin 1,2 IF-input vision carrier
Pin 18,19 IF-input sound carrier
Pin 3 (17) Intercarrier input Pin 3: 5.74 MHz Pin 17: 5.5 MHz
Preliminary Information
5
TDA 4480-C
TELEFUNKEN Semiconductors
Pin 5 (15) Intercarrier output Pin 5: 5.74 MHz Pin 15: 5.5 MHz
Pin 7 AP-output AM/PM (channel 1, 5.5 MHz)
Pin 14 AF-output FM (channel 2, 5.74 MHz)
6
Preliminary Information
TELEFUNKEN Semiconductors
TDA 4480-C
Pin 8,9 (12,13) Phase tank circuit Pin 8, 9 : 5.74 MHz Pin 12,13 : 5.5 MHz
Pin 4 AGC time constant
Pin 6 Standard switch
Preliminary Information
7
TDA 4480-C
TELEFUNKEN Semiconductors
Pin 10 VC0 tank circuit
Dimensions in mm
8
Preliminary Information
TELEFUNKEN Semiconductors
TDA 4480-C
OZONE DEPLETING SUBSTANCES POLICY STATEMENT
It is the policy of TEMIC TELEFUNKEN microelectronic GmbH to 1. Meet all present and future national and international statutory requirements and 2. Regularly and continuously improve the performance of our products, processes, distribution and operating systems with respect to their impact on the health and safety of our employees and the public, as well as their impact on the environment. Of particular concern is the control or elimination of releases into the atmosphere of those substances which are known as ozone depleting substances ( ODSs). The Montreal Protocol ( 1987) and its London Amendments ( 1990) will soon severely restrict the use of ODSs and forbid their use within the next ten years. Various national and international initiatives are pressing for an earlier ban on these substances. TEMIC TELEFUNKEN microelectronic GmbH semiconductor division has been able to use its policy of continuous improvements to eliminate the use of any ODSs listed in the following documents. 1. Annex A, B and list of transitional substances of the Montreal Protocol and the London Amendments respectively 2 . Class I and II ozone depleting substances in the Clean Air Act Amendments of 1990 by the Environmental Protection Agency ( EPA) in the USA and 3. Council Decision 88/540/EEC and 91/690/EEC Annex A, B and C ( transitional substances ) respectively. TEMIC can certify that our semiconductors are not manufactured with and do not contain ozone depleting substances.
We reserve the right to make changes to improve technical design without further notice. Parameters can vary in different applications. All operating parameters must be validated for each customer application by the customer. Should the buyer use TEMIC products for any unintended or unauthorized application, the buyer shall indemnify TEMIC against all claims, costs, damages, and expenses, arising out of, directly or indirectly, any claim of personal damage, injury or death associated with such unintended or unauthorized use. TEMIC TELEFUNKEN microelectronic GmbH, P.O.B. 3535, D-74025 Heilbronn, Germany Telephone: 49 ( 0 ) 7131 67 2831, Fax Number: 49 ( 0 ) 7131 67 2423
Preliminary Information
9

▲Up To Search▲

Price & Availability of TDA4480C

	To Download TDA4480C Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .