 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| MBR2535CT THRU MBR2560CT SCHOTTKY RECTIFIER Reverse Voltage - 35 to 60 Volts TO-220AB 0.415 (10.54) MAX. 0.370 (9.40) 0.360 (9.14) 0.154 (3.91) 0.185 (4.70) 0.175 (4.44) DIA. 0.148 (3.74) 0.055 (1.39) 0.045 (1.14) Forward Current - 30.0 Amperes FEATURES Plastic package has Underwriters Laboratory Flammability Classifications 94V-0 Dual rectifier construction, positive center-tap Metal silicon junction, majority carrier conduction Low power loss, high efficiency High current capability, low forward voltage drop High surge capability For use in low voltage, high frequency inverters, free wheeling, and polarity protection applications Guardring for overvoltage protection High temperature soldering guaranteed: 250C/10 seconds, 0.25" (6.35mm) from case 0.113 (2.87) 0.103 (2.62) 0.145 (3.68) 0.135 (3.43) 0.560 (14.22) 0.530 (13.46) 0.410 (10.41) 0.390 (9.91) PIN 2 0.635 (16.13) 0.625 (15.87) 1 160 (4.06) 140 (3.56) 0.560 (14.22) 0.530 (13.46) 3 0.350 (8.89) 0.330 (8.38) 1.148 (29.16) 1.118 (28.40) 0.110 (2.79) 0.100 (2.54) 0.105 (2.67) 0.095 (2.41) MECHANICAL DATA 0.037 (0.94) 0.027 (0.68) 0.105 (2.67) 0.095 (2.41) 0.205 (5.20) 0.195 (4.95) 0.022 (0.56) 0.014 (0.35) PIN 1 PIN 3 PIN 2 CASE Dimensions in inches and (millimeters) Case: JEDEC TO-220AB molded plastic body Terminals: Lead solderable per MIL-STD-750, Method 2026 Polarity: As marked Mounting Position: Any Mounting Torque: 5 in. - lbs. max. Weight: 0.08 ounce, 2.24 grams MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Ratings at 25C ambient temperature unless otherwise specified. SYMBOLS MBR2535CT MBR2545CT MBR2550CT MBR2560CT UNITS Maximum repetitive peak reverse voltage Maximum working peak reverse voltage Maximum DC blocking voltage Maximum average forward rectified current at TC=130C Peak repetitive forward current per leg at TC=130C (rated VR, square wave, 20 KHZ) Peak forward surge current 8.3ms single half sine-wave superimposed on rated load (JEDEC Method) Peak repetitive reverse surge current (NOTE 1) Maximum instantaneous forward voltage IF=15.0A,TC=25C per leg at: (NOTE 2) IF=15.0A,TC=25C IF= 30A, TC=25C IF= 30A, TC=125C Maximum instantaneous reverse current at rated DC blocking voltage per leg (NOTE 2) Maximum thermal resistance (NOTE 3) Voltage rate of change (rated VR) Operating junction temperature range Storage temperature range NOTES: (1) 2.0s pulse width, f=1.0 KHZ (2) Pulse test: 300s pulse width, 1% duty cycle (3) Thermal resistance from junction to case per leg VRRM VRWM VDC I(AV) IFRM 35 35 35 45 45 45 30.0 30.0 50 50 50 60 60 60 Volts Volts Volts Amps Amps IFSM IRRM 1.0 0.82 0.73 0.2 40.0 150.0 0.5 0.75 0.65 1.0 50.0 1.5 10,000 -65 to +150 -65 to +175 Amps Amps VF Volts TC=25C TC=125C IR RJC dv/dt TJ TSTG mA C/W V/s C C 4/98 RATINGS AND CHARACTERISTIC CURVES MBR2535CT THRU MBR2560CT FIG. 2 - MAXIMUM NON-REPETITIVE PEAK FORWARD SURGE CURRENT PER LEG PEAK FORWARD SURGE CURRENT, AMPERES 150 125 100 75 50 25 0 1 FIG. 1 - FORWARD CURRENT DERATING CURVE AVERAGE FORWARD CURRENT, AMPERES 30 RESISTIVE OR INDUCTIVE LOAD TC=130C 8.3ms SINGLE HALF SINE-WAVE (JEDEC Method) 24 18 12 6 0 10 NUMBER OF CYCLES AT 60 HZ 100 0 50 100 150 CASE TEMPERATURE, C FIG. 4 - TYPICAL REVERSE CHARACTERISTICS PER LEG FIG. 3 - TYPICAL INSTANTANEOUS FORWARD CHARACTERISTICS 50 50 TJ=25C PULSE WIDTH=300s 1% DUTY CYCLE 10 INSTANTANEOUS REVERSE CURRENT, MILLIAMPERES TJ=125C INSTANTANEOUS FORWARD CURRENT, AMPERES 10 TJ=150C 1 TJ=25C 1 TJ=75C 0.1 MBR2535CT - MBR2545CT MBR2550CT & MBR2560CT 0.1 0.01 TJ=25C MBR2535CT - MBR2545CT MBR2550CT & MBR2560CT 0.01 0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1.0 1.1 1.2 INSTANTANEOUS FORWARD VOLTAGE, VOLTS 0.001 0 20 40 60 80 100 PERCENT OF RATED PEAK REVERSE VOLTAGE, % FIG. 5 - TYPICAL JUNCTION CAPACITANCE PER LEG TRANSIENT THERMAL IMPEDANCE, C/W FIG. 6 - TYPICAL TRANSIENT THERMAL IMPEDANCE PER LEG 5,000 JUNCTION CAPACITANCE, pF 100 TJ=25C f=1.0 MHz Vsig=50mVp-p 1,000 10 1 MBR2535CT - MBR2545CT MBR2550CT & MBR2560CT 100 0.1 1 10 100 REVERSE VOLTAGE, VOLTS 0.1 0.01 0.1 1 10 100 t, PULSE DURATION, sec. |
Price & Availability of MBR2560CT
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |