|
If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
Datasheet File OCR Text: |
Bulletin PD-20568 rev. E 09/01 40L15CT 40L15CTS 40L15CT-1 SCHOTTKY RECTIFIER 2 x 20 Amps Major Ratings and Characteristics Characteristics IF(AV) Rectangular waveform VRRM IFSM @ tp = 5 s sine VF TJ @ 19 Apk, TJ=125C (per leg, Typical) Description/Features Units A V A V The center tap Schottky rectifier module has been optimized for ultra low forward voltage drop specifically for the OR-ing of parallel power supplies. The proprietary barrier technology allows for reliable operation up to 125 C junction temperature. Typical applications are in parallel switching power supplies, converters, reverse battery protection, and redundant power subsystems. 125C TJ operation (VR < 5V) Center tap module Optimized for OR-ing applications Ultra low forward voltage drop High frequency operation Guard ring for enhanced ruggedness and long term reliability High purity, high temperature epoxy encapsulation for enhanced mechanical strength and moisture resistance Values 40 15 700 0.25 - 55 to 125 C Case Styles 40L15CT 40L15CTS 40L15CT-1 Base Common Cathode 2 Base Common Cathode 2 Base Common Cathode 2 1 Anode 2 Common Cathode 3 1 Anode Anode 2 Common Cathode 3 1 Anode Anode 2 Common Cathode 3 Anode TO-220AB www.irf.com D2PAK TO-262 1 40L15CT, 40L15CTS, 40L15CT-1 Bulletin PD-20568 rev. E 09/01 Voltage Ratings Part number VR Max. DC Reverse Voltage (V) @ TJ = 100 C VRWM Max. Working Peak Reverse Voltage (V) @ TJ = 100 C Values 15 Absolute Maximum Ratings Parameters IF(AV) Max. Average Forward Current * See Fig. 5 (Per Leg) (Per Device) Values 20 40 700 330 10 2 Units A Conditions 50% duty cycle @ TC = 85C, rectangular wave form Following any rated load condition and with 10ms Sine or 6ms Rect. pulse rated VRRM applied 5s Sine or 3s Rect. pulse TJ = 25 C, IAS = 2 Amps, L = 6 mH Current decaying linearly to zero in 1 sec Frequency limited by TJ max. VA = 1.5 x VR typical I FSM Max. Peak One Cycle Non-Repetitive Surge Current (Per Leg) * See Fig. 7 E AS I AR Non-Repetitive Avalanche Energy (Per Leg) Repetitive Avalanche Current (Per Leg) A mJ A Electrical Specifications Parameters VFM Forward Voltage Drop (Per Leg) * See Fig. 1 Values Typ. Max. (1) 0.25 0.37 (1) 7.6 8 2000 0.41 0.52 0.33 0.50 10 600 Units V V V V mA mA V m pF nH V/ s @ 19A @ 40A @ 19A @ 40A TJ = 25 C Conditions TJ = 25 C TJ = 125 C VR = rated VR I RM Reverse Leakage Current (Per Leg) * See Fig. 2 TJ = 100 C TJ = TJ max. VF(TO) Threshold Voltage rt CT LS Forward Slope Resistance Max. Junction Capacitance (Per Leg) Typical Series Inductance (Per Leg) 0.182 VR = 5VDC, (test signal range 100Khz to 1Mhz) 25C Measured lead to lead 5mm from package body dv/dt Max. Voltage Rate of Change (Rated VR) 10,000 (1) Pulse Width < 300s, Duty Cycle <2% Thermal-Mechanical Specifications Parameters TJ Tstg Max. Junction Temperature Range Max. Storage Temperature Range Values -55 to 125 -55 to 150 1.5 0.50 40 2 (0.07) Min. Max. 6 (5) 12 (10) Units C C Conditions RthJC Max. Thermal Resistance Junction to Case (Per Leg) RthCS Typical Thermal Resistance Case to Heatsink RthJA Max. Thermal Resistance Junction to Ambient wt T Approximate Weight Mounting Torque C/W DC operation * See Fig. 4 C/W Mounting surface , smooth and greased Only for TO-220 C/W DC operation For D2Pak and TO-262 g (oz.) Kg-cm Non-lubricated threads (Ibf-in) 2 www.irf.com 40L15CT, 40L15CTS, 40L15CT-1 Bulletin PD-20568 rev. E 09/01 1 00 0 10 0 0 T J = 100 C 100 75 C 50 C Reverse C urren t - I R (m A) 10 25 C 1 Instan ta n eo us Forw ard C ur ren t - I F (A ) 100 0 .1 0 3 6 9 12 15 Reverse V oltag e - V R (V ) Fig. 2 - Typical Values of Reverse Current Vs. Reverse Voltage 1 00 0 0 Jun ction C a pa cita n ce - C T (pF) T J = 12 5 C TJ = 7 5 C TJ = 2 5 C 10 T J = 25 C 1 0 00 1 0 0 .2 0 .4 0.6 0.8 1 1 .2 1.4 1 .6 Forw a rd V olta ge D rop - V FM (V ) 100 0 5 10 15 20 Reverse V olta ge - VR (V ) Fig. 1 - Maximum Forward Voltage Drop Characteristics 10 Th erm a l Im pedance Z thJC ( C /W ) Fig. 3 - Typical Junction Capacitance Vs. Reverse Voltage 1 D D D D D = = = = = 0 .75 0 .50 0 .33 0 .25 0 .2 0 PD M 0 .1 Sin gle Pu lse (Therm a l Resista n ce) Notes: t1 t2 1. D uty factor D = t 1/ t 2 2. Peak T J = P D M x Z thJC+ T C 0 .1 1 10 100 0 .0 1 0.00 00 1 0 .00 0 1 0 .0 01 0.0 1 t 1 , Re ctan g ular Pu lse D ura tio n (Seco nd s) Fig. 4 - Maximum Thermal Impedance ZthJC Characteristics www.irf.com 3 40L15CT, 40L15CTS, 40L15CT-1 Bulletin PD-20568 rev. E 09/01 1 00 Allow a b le Ca se Te m pera t ure - ( C ) A vera ge Pow er Loss - (W a tts) 95 90 85 80 75 se e no te ( 2) 14 12 10 8 6 4 2 0 0 4 8 12 16 20 24 0 5 10 15 20 25 30 A vera ge Forw ard C urren t - I F(AV) (A) A vera ge Forw a rd C urren t - I F(AV) (A) D D D D D = = = = = 0.20 0.25 0.33 0.50 0.75 RM S Lim it DC Squa re w ave (D = 0.50) 70 Fig. 5 - Maximum Allowable Case Temperature Vs. Average Forward Current 1000 Non-Repetitive Surge C urrent - I FSM (A) Fig. 6 - Forward Power Loss Characteristics At An y Rated Load C ond ition An d W ith Rated V RRM Ap plied Follow in g Surg e 100 10 100 1000 10000 Sq uare W ave Pulse D uration - t p (m icrosec) Fig. 7 - Maximum Non-Repetitive Surge Current L H IG H -SPE ED SW ITC H FREE-W HE EL D IO D E 40H FL40S02 V d = 25 V olt D UT IRFP460 Rg = 25 ohm + C UR RE N T M O N ITO R Fig. 8 - Unclamped Inductive Test Circuit (2) Formula used: TC = TJ - (Pd + PdREV) x RthJC ; Pd = Forward Power Loss = IF(AV) x VFM @ (IF(AV) / D) (see Fig. 6); PdREV = Inverse Power Loss = VR1 x IR (1 - D); IR @ VR1 = 80% rated VR 4 www.irf.com 40L15CT, 40L15CTS, 40L15CT-1 Bulletin PD-20568 rev. E 09/01 Outline Table 10.54 (0.41) MAX. 3.78 (0.15) 3.54 (0.14) 15.24 (0.60) 14.84 (0.58) 123 14.09 (0.55) 13.47 (0.53) 3.96 (0.16) 3.55 (0.14) 2.04 (0.080) MAX. 1.40 (0.05) 1.15 (0.04) 0.94 (0.04) 0.69 (0.03) 1 2 Common Cathode 3 1.32 (0.05) DIA. 6.48 (0.25) 6.23 (0.24) 2 1.22 (0.05) 2.92 (0.11) 2.54 (0.10) TERM 2 0.10 (0.004) Base Common Cathode 2.89 (0.11) 2.64 (0.10) 2 Anode Anode 123 4.57 (0.18) 4.32 (0.17) 0.61 (0.02) MAX. 5.08 (0.20) REF. Conform to JEDEC outline TO-220AB Dimensions in millimeters and (inches) 10.16 (0.40) REF. 4.69 (0.18) 4.20 (0.16) 1.32 (0.05) 6.47 (0.25) 15.49 (0.61) 1.22 (0.05) 93 6.18 (0.24) 14.73 (0.58) 2.61 (0.10) 2.32 (0.09) 8.89 (0.35) 5.28 (0.21) 4.78 (0.19) 0.55 (0.02) 0.46 (0.02) Base Common Cathode 2 3X 1.40 (0.055) REF. 0.93 (0.37) 0.69 (0.27) 1.14 (0.045) 2X MINIMUM RECOMMENDED FOOTPRINT 11.43 (0.45) 1 2 Common Cathode 3 4.57 (0.18) 4.32 (0.17) 3 8.89 (0.35) 1 2 17.78 (0.70) 3.81 (0.15) 2.08 (0.08) 2X Anode Anode 0.61 (0.02) MAX. 5.08 (0.20) REF. 2.54 (0.10) 2X Conform to JEDEC outline D2Pak (SMD-220) Dimensions in millimeters and (inches) www.irf.com 5 40L15CT, 40L15CTS, 40L15CT-1 Bulletin PD-20568 rev. E 09/01 Outline Table Modified JEDEC outline TO-262 Dimensions in millimeters and (inches) Base Common Cathode 2 1 Anode 2 Common Cathode 3 Anode Marking Information EXAMPLE: THIS IS A 40L15CTS INTERNATIONAL RECTIFIER LOGO (K) PART NUMBER 40L15CTS 9906 9G3A ASSEMBLY LOT CODE DATE CODE (YYWW) YY = YEAR WW = WEEK (A) (A) 6 www.irf.com 40L15CT, 40L15CTS, 40L15CT-1 Bulletin PD-20568 rev. E 09/01 Tape & Reel Information TRR 1.60 (0.063) 1.50 (0.059) 4.10 (0.161) 3.90 (0.153) 1.60 (0.063) 1.50 (0.059) DIA. 0.368 (0.0145) 0.342 (0.0135) FEED DIR ECTION 1.85 (0.073) 1.65 (0.065) 11.60 (0.457) 11.40 (0.449) 15.42 (0.609) 15.22 (0.601) 1.75 (0.069) 24.30 (0.957) 23.90 (0.941) TRL 10.90 (0.429) 10.70 (0.421) 1.25 (0.049) 16.10 (0.634) 15.90 (0.626) DIA. 4.72 (0.186) 4.52 (0.178) FEED DIRECTION 13.50 (0.532) 12.80 (0.504) DIA. 26.40 (1.039) 24.40 (0.961) SMD-220 Tape & Reel When ordering, indicate the part number, part orientation, and the quantity. Quantities are in multiples 60 (2.362) D IA . MIN . 360 (14.173) DIA. MAX. of 800 pieces per reel for both TRL and TRR. Dimensions in millimeters and (inches) Ordering Information Table Device Code 40 1 L 2 15 3 C 4 T 5 -1 6 1 2 3 4 5 6 - Current Rating: 40 = 40A L = Schottky L Series Voltage Rating: 15 = 15V C = Common Cathode T = TO-220 -1 = TO-262 option www.irf.com 7 40L15CT, 40L15CTS, 40L15CT-1 Bulletin PD-20568 rev. E 09/01 Data and specifications subject to change without notice. This product has been designed and qualified for Industrial Level. Qualification Standards can be found on IR's Web site. IR WORLD HEADQUARTERS: 233 Kansas St., El Segundo, California 90245, USA Tel: (310) 252-7105 TAC Fax: (310) 252-7309 Visit us at www.irf.com for sales contact information. 09/01 8 www.irf.com |
Price & Availability of 40L15CT-1 |
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |