![]() |
|
If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
Datasheet File OCR Text: |
HT71XX-1 30mA Voltage Regulator Features * Low power consumption * Low voltage drop * Low temperature coefficient * High input voltage (up to 24V) * Output voltage accuracy: tolerance 3% * TO-92, SOT-89 and SOT-25 package Applications * Battery-powered equipment * Communication equipment * Audio/Video equipment General Description The HT71XX-1 series is a set of three-terminal low power high voltage regulators implemented in CMOS technology. They allow input voltages as high as 24V. They are available with several fixed output voltages ranging from 3.0V to 5.0V. CMOS technology ensures low voltage drop and low quiescent current. Although designed primarily as fixed voltage regulators, these devices can be used with external components to obtain variable voltages and currents. Selection Table Part No. HT7130-1 HT7133-1 HT7136-1 HT7144-1 HT7150-1 Output Voltage 3.0V 3.3V 3.6V 4.4V 5.0V Tolerance 3% 3% 3% 3% 3% TO-92 SOT-89 SOT-25 71XXA-1 (for TO-92) 71XX-1 (for SOT-89) 1XX1 (for SOT-25) Package Marking Note: XX stands for output voltages. Block Diagram VIN VOUT Vref GND Rev. 1.10 1 August 22, 2002 HT71XX-1 Pin Assignment T O -9 2 7 1 X X A -1 . r o n t V ie w S O T -8 9 S O T -2 5 NC NC 7 1 X X -1 1XX1 T o p V ie w GND V IN VOUT GND V IN VOUT GND V IN VOUT B o tto m V ie w GND GND V IN VOUT V IN VOUT Pad Assignment Pad Coordinates Pad No. 1 (0 ,0 ) Unit: mm Y -401.00 -401.00 -401.00 X -429.00 123.50 416.00 2 3 1 2 3 VOUT VDD Chip size: 11111051 (mm)2 * The IC substrate should be connected to VDD in the PCB layout artwork. Absolute Maximum Ratings Supply Voltage .........................................-0.3V to 26V Power Consumption (*1) .................................. 200mW Power Consumption (*2) ...................................150mW Note: These are stress ratings only. Stresses exceeding the range specified under Absolute Maximum Ratings may cause substantial damage to the device. Functional operation of this device at other conditions beyond those listed in the specification is not implied and prolonged exposure to extreme conditions may affect device reliability. *1: applied to SOT-89 and TO-92 *2: applied to SOT-25 Storage Temperature ...........................-50C to 125C Operating Temperature ..............................0C to 70C VSS Rev. 1.10 2 August 22, 2002 HT71XX-1 Electrical Characteristics HT7130-1, +3.0V output type Symbol VOUT IOUT DVOUT VDIF ISS DVOUT DVIN VOUT VIN DVOUT DTa Parameter Output Voltage Output Current Load Regulation Voltage Drop Current Consumption Line Regulation Input Voltage Temperature Coefficient Test Conditions VIN 5V 5V 5V 3/4 5V 3/4 3/4 5V Conditions IOUT=10mA 3/4 1mAIOUT20mA IOUT=1mA No load 4VVIN24V IOUT=1mA 3/4 IOUT=10mA 0C HT7136-1, +3.6V output type Symbol VOUT IOUT DVOUT VDIF ISS DVOUT DVIN VOUT VIN DVOUT DTa Parameter Output Voltage Output Current Load Regulation Voltage Drop Current Consumption Line Regulation Input Voltage Temperature Coefficient Test Conditions VIN 5.6V 5.6V 5.6V 3/4 5.6V 3/4 3/4 5.6V Conditions IOUT=10mA 3/4 1mAIOUT30mA IOUT=1mA No load 4.6VVIN24V IOUT=1mA 3/4 IOUT=10mA 0C Rev. 1.10 3 August 22, 2002 HT71XX-1 HT7144-1, +4.4V output type Symbol VOUT IOUT DVOUT VDIF ISS DVOUT DVIN VOUT VIN DVOUT DTa Parameter Output Voltage Output Current Load Regulation Voltage Drop Current Consumption Line Regulation Input Voltage Temperature Coefficient Test Conditions VIN 6.4V 6.4V 6.4V 3/4 6.4V 3/4 3/4 6.4V Conditions IOUT=10mA 3/4 1mAIOUT30mA IOUT=1mA No load 5.4VVIN24V IOUT=1mA 3/4 IOUT=10mA 0C Application Circuits Basic circuits V IN V C1 10m. IN H T 7 1 X X -1 S e r ie s GND V OUT V OUT C2 10m. Com m on S in g le p o in t G N D Com m on Rev. 1.10 4 August 22, 2002 HT71XX-1 High output current positive voltage regulator T r1 V IN V R1 C1 10m. IN H T 7 1 X X -1 S e r ie s GND V OUT V OUT C2 10m. Com m on S in g le p o in t G N D Com m on Short-Circuit protection by Tr1 V IN Rs T r1 V R1 C1 10m. IN H T 7 1 X X -1 S e r ie s GND V OUT V OUT C2 10m. Com m on S in g le p o in t G N D Com m on Circuit for increasing output voltage V IN V IN H T 7 1 X X -1 S e r ie s GND IS S V OUT V OUT C1 10m. C2 V 10m. XX R1 R2 Com m on S in g le p o in t G N D Com m on VOUT = VXX (1+ R2 ) + ISS R2 R1 Rev. 1.10 5 August 22, 2002 HT71XX-1 Circuit for increasing output voltage V IN V IN H T 7 1 X X -1 S e r ie s GND IS S V OUT V OUT C1 10m. C2 10m. V XX R1 D1 Com m on S in g le p o in t G N D Com m on VOUT=VXX+VD1 Constant current regulator V IN V IN H T 7 1 X X -1 S e r ie s GND IS S V OUT C1 10m. C2 V 10m. XX R A IO UT R L Com m on IOUT = Dual supply VXX + ISS RA IC 1 V IN V IN H T 7 1 X X -1 S e r ie s GND V OUT V C3 10m. V OUT1 IC 2 V IN H T 7 1 X X -1 S e r ie s GND V OUT OUT2 C1 10m. Com m on C2 10m. R1 Com m on Rev. 1.10 6 August 22, 2002 HT71XX-1 Package Information 3-pin TO-92 outline dimensions A B D C E . G H Symbol A B C D E F G H I a Dimensions in mil Min. 170 170 500 11 90 45 45 130 8 4 Nom. 3/4 3/4 3/4 3/4 3/4 3/4 3/4 3/4 3/4 3/4 Max. 200 200 3/4 20 110 55 65 160 18 6 Rev. 1.10 7 August 22, 2002 HT71XX-1 3-pin SOT-89 outline dimensions A B I J E C D G . H Symbol A B C D E F G H I J Dimensions in mil Min. 173 64 90 35 155 14 17 3/4 55 14 Nom. 3/4 3/4 3/4 3/4 3/4 3/4 3/4 59 3/4 3/4 Max. 181 72 102 47 167 19 22 3/4 63 17 Rev. 1.10 8 August 22, 2002 HT71XX-1 5-pin SOT-25 outline dimensions D C L E H e A2 b A1 A Symbol A A1 A2 b C D E e H L q Dimensions in mm Min. 1.00 3/4 0.70 0.35 0.10 2.70 1.40 3/4 2.60 0.37 1 Nom. 3/4 3/4 3/4 3/4 3/4 3/4 3/4 1.90 3/4 3/4 3/4 Max. 1.30 0.10 0.90 0.50 0.25 3.10 1.80 3/4 3 3/4 9 Rev. 1.10 9 q August 22, 2002 HT71XX-1 Product Tape and Reel Specifications TO-92 reel dimensions (Unit: mm) P ackage U p, 30 . la t S id e U p P ackage U p, . la t S id e D o w n 58 88 360 43 Rev. 1.10 10 August 22, 2002 HT71XX-1 SOT-89 & SOT-25 reel dimensions T2 D A B C T1 SOT-89 Symbol A B C D T1 T2 SOT-25 Symbol A B C D T1 T2 Description Reel Outer Diameter Reel Inner Diameter Spindle Hole Diameter Key Slit Width Space Between Flange Reel Thickness Dimensions in mm 1781.0 621.0 13.00.2 2.50.25 8.4+1.5 -0.0 11.4+1.5 Description Reel Outer Diameter Reel Inner Diameter Spindle Hole Diameter Key Slit Width Space Between Flange Reel Thickness Dimensions in mm 1801.0 621.5 12.75+0.15 1.90.15 12.4+0.2 17-0.4 Rev. 1.10 11 August 22, 2002 HT71XX-1 TO-92 carrier tape dimensions P Dh H1 H H0 l1 W2 W0 t W1 W .1 P2 P0 .2 D0 TO-92 Symbol I1 P P0 P2 F1 F2 Dh W W0 W1 W2 H0 H1 D0 t H Note: Description Taped Lead Length Component Pitch Perforation Pitch Component to Perforation (Length Direction) Lead Spread Lead Spread Component Alignment Carrier Tape Width Hold-down Tape Width Perforation Position Hold-down Tape Position Lead Clinch Height Component Height Perforation Diameter Taped Lead Thickness Component Base Height Dimensions in mm (2.5) 12.71.0 12.70.3 6.350.4 2.5+0.4 -0.1 2.5+0.4 -0.1 00.1 18.0+1.0 -0.5 6.00.5 9.00.5 (0.5) 16.00.5 Less than 24.7 4.00.2 0.70.2 19.00.5 Thickness less than 0.380.05mm~0.5mm P0 Accumulated pitch tolerance: 1mm/20pitches. ( ) Bracketed figures are for consultation only Rev. 1.10 12 August 22, 2002 HT71XX-1 SOT-89 & SOT-25 carrier tape dimensions D E . W C P0 P1 t B0 D1 P K0 A0 SOT-89 Symbol W P E F D D1 P0 P1 A0 B0 K0 t C SOT-25 Symbol W P E F D D1 P0 P1 A0 B0 K0 t C Description Carrier Tape Width Cavity Pitch Perforation Position Cavity to Perforation (Width Direction) Perforation Diameter Cavity Hole Diameter Perforation Pitch Cavity to Perforation (Length Direction) Cavity Length Cavity Width Cavity Depth Carrier Tape Thickness Cover Tape Width Dimensions in mm 8.0+0.3 -0.3 4.0 1.75 3.50.05 1.5+0.1 1.5+0.1 4.0 2.0 3.15 3.2 1.4 0.200.03 Description Carrier Tape Width Cavity Pitch Perforation Position Cavity to Perforation (Width Direction) Perforation Diameter Cavity Hole Diameter Perforation Pitch Cavity to Perforation (Length Direction) Cavity Length Cavity Width Cavity Depth Carrier Tape Thickness Cover Tape Width Dimensions in mm 12.0+0.3 -0.1 8.00.1 1.750.1 5.50.05 1.5+0.1 1.5+0.1 4.00.1 2.00.10 4.80.1 4.50.1 1.80.1 0.300.013 9.3 Rev. 1.10 13 August 22, 2002 HT71XX-1 Holtek Semiconductor Inc. (Headquarters) No.3, Creation Rd. II, Science-based Industrial Park, Hsinchu, Taiwan Tel: 886-3-563-1999 Fax: 886-3-563-1189 http://www.holtek.com.tw Holtek Semiconductor Inc. (Sales Office) 11F, No.576, Sec.7 Chung Hsiao E. Rd., Taipei, Taiwan Tel: 886-2-2782-9635 Fax: 886-2-2782-9636 Fax: 886-2-2782-7128 (International sales hotline) Holtek Semiconductor (Shanghai) Inc. 7th Floor, Building 2, No.889, Yi Shan Rd., Shanghai, China Tel: 021-6485-5560 Fax: 021-6485-0313 http://www.holtek.com.cn Holtek Semiconductor (Hong Kong) Ltd. Block A, 3/F, Tin On Industrial Building, 777-779 Cheung Sha Wan Rd., Kowloon, Hong Kong Tel: 852-2-745-8288 Fax: 852-2-742-8657 Holmate Semiconductor, Inc. 46712 Fremont Blvd., Fremont, CA 94538 Tel: 510-252-9880 Fax: 510-252-9885 http://www.holmate.com Copyright O 2002 by HOLTEK SEMICONDUCTOR INC. The information appearing in this Data Sheet is believed to be accurate at the time of publication. However, Holtek assumes no responsibility arising from the use of the specifications described. The applications mentioned herein are used solely for the purpose of illustration and Holtek makes no warranty or representation that such applications will be suitable without further modification, nor recommends the use of its products for application that may present a risk to human life due to malfunction or otherwise. Holteks products are not authorized for use as critical components in life support devices or systems. Holtek reserves the right to alter its products without prior notification. For the most up-to-date information, please visit our web site at http://www.holtek.com.tw. Rev. 1.10 14 August 22, 2002 |
Price & Availability of HT7130-1
![]() |
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |