 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| CCD Area Image Sensor MN39143AT Diagonal 6.0 mm (type-1/3) 410k-pixel CCD Area Image Sensor I Overview The MN39143AT is a 6.0 mm (type-1/3) interline transfer CCD (IT-CCD) solid state image sensor device. This device uses photodiodes in the optoelectric conversion section and CCDs for signal readout. The electronic shutter function has made an exposure time of 1/10 000 seconds possible. Further, this device has the features of high sensitivity, low noise, broad dynamic range, and low smear. This device has a total of 403 920 pixels (816 horizontal x 495 vertical) and provides stable and clear images with a resolution of 550 horizontal TV-lines and 350 vertical TV-lines. Part Number Size System Color or B/W EIA B/W (Top View) I Pin Assignments OD R RD VO LG OG H2 H1 1 2 3 4 5 6 7 8 16 15 14 13 12 11 10 9 PW V4 V3 V2 V1 PT Sub IS MN39143AT 6.0 mm (type-1/3) I Features * Effective pixel number 771 (horizontal) x 492 (vertical) * High sensitivity * Broad dynamic range * Low smear * Electronic shutter I Applications * Serveillance cameras * FA, OA cameras Publication date: September 2001 SMD00011AEC 1 MN39143AT I Block Diagram (2 columns OB + 771 columns valid area + 43 columns OB) 15 Vertical shift register PW (Internal connection) PW LG VO OD RD 16 (2 dummies + OB1 + 492 + OB1 + 1 dummy) V4 14 V3 13 12 V2 Photo diode V1 9 IS 16 4 1 3 Output section 5 10 Sub 11 PT Horizontal shift register 2 6 7 H2 OG I Pin Descriptions Pin No. Symbol 1 2 3 4 5 6 7 8 OD R RD VO LG OG H2 H1 Description Output drain Reset pulse Reset drain Video output Output load transistor gate Output gate Horizontal register clock pulse 2 Horizontal register clock pulse 1 Pin No. Symbol 9 10 11 12 13 14 15 16 IS Sub PT V1 V2 V3 V4 PW Description Horizontal CCD input source Substrate P-well for protection circuit Vertical shift register clock pulse 1 Vertical shift register clock pulse 2 Vertical shift register clock pulse 3 Vertical shift register clock pulse 4 P-well I Device Parameter (H x V) Parameter Total pixel number Effective pixel number Active pixel number Image sensing block dimension Pixel dimension Value 816 x 495 771 x 492 759 x 482 4.93 x 3.69 6.40 x 7.50 Unit pixel pixel pixel mm2 m2 2 SMD00011AEC H1 R 8 MN39143AT I Absolute Maximum Ratings and Operating Conditions Parameter VRD VOD VIS VLG VOG VPT VR *3, 4 Absolute maximum rating Lower limit - 0.2 - 0.2 - 0.2 Upper limit 18.0 18.0 18.0 Min 14.5 14.5 14.5 Operating condition Typ 15.0 15.0 15.0 Max 15.5 15.5 15.5 Unit V V V V V (Internal bias) (Internal bias) -9.0 - 0.2 - 0.2 - 0.2 - 0.2 - 0.2 - 0.2 - 0.2 - 0.2 High Middle Low *3, 4 0.2 -7.3 3.0 -7.0 0 3.3 (Supplied internally) -6.7 3.6 V V V V VPW *1, (Reference voltage) High-Low Bias 5.0 5.0 5.0 5.0 5.0 5.0 45.0 45.0 18.0 18.0 18.0 15.0 15.0 18.0 18.0 18.0 15.0 15.0 70 80 VH1 VH2 VSub *2 *2 High Low High Low 3.0 - 0.1 3.0 - 0.1 3.3 0 3.3 0 (Supplied internally) 3.6 0.1 3.6 0.1 V V V V V VSub VV1 21.0 14.5 - 0.2 -7.3 - 0.2 -7.3 14.5 - 0.2 -7.3 - 0.2 -7.3 22.0 15.0 0 -7.0 0 -7.0 15.0 0 -7.0 0 -7.0 25 23.0 15.5 0.2 -6.7 0.2 -6.7 15.5 0.2 -6.7 0.2 -6.7 V V V V V V V V V V V C C *3, 4 -9.0 -9.0 -9.0 -9.0 -9.0 -9.0 -9.0 -9.0 -9.0 -9.0 -10 -30 VV2 VV3 Middle Low *3, 4 High Middle Low VV4 *3, 4 Middle Low Operating temperature Storage temperature Note) *1 : Reset VR(H) *2: VSub when using electronic shutter function VSub High High-Low VSub VSub Low VSub (Supplied internally) VR(L) Bias GND GND - 0.2 < VV - VPT < 24.5 (V) *3: Absolute maximum rating *4: Relation between VPT and VVL Set VPT that is to meet the following conditions for VL voltage of the vertical shift clock waveform. VPT VL (VV1L to VV4L) SMD00011AEC 3 MN39143AT I Optical Characteristics Parameter S/N ratio (dark) Sensitivity Carrier saturation output Vertical smear Symbol S/Nd So Sa Sm Conditions Dark condition Standard condition (J chart) J chart 1/10 V chart, F2.8 Min 57 Typ 60 750 1 400 -100 Max -95 Unit dB mV mV dB I Graph of Characteristics CCD spectral characteristics 100 90 80 70 Relative sensitivity (%) 60 50 40 30 20 10 0 400 450 500 550 600 650 700 Wavelength (nm) 4 SMD00011AEC MN39143AT I Timing Diagram * High speed pulse timing H2 50% 50% 50% 34.9 ns 3 ns CCD output R 50% 50% 3.2 ns 3 ns 13.0 ns 3 ns Clamp pulse (DS1) 50% 50% 6.7 ns +3.0 ns -2.7 ns 17.5 ns 3 ns Sampling pulse (DS2) 50% 4.3 ns +3.0 ns -2.7 ns 50% 17.5 ns 3 ns SMD00011AEC 5 MN39143AT I Timing Diagram (continued) * Rise time and fall time of each pulse V1 , V3 0.9 0.9 0.1 0.9 0.1 0.9 0.1 300 ns V2 , V4 300 ns 300 ns 0.1 300 ns 0.9 0.9 0.1 300 ns H1 , H2 , R 0.9 0.9 0.1 300 ns DS1, DS2 0.9 0.9 0.1 10 ns 0.1 10 ns 0.1 10 ns 0.1 10 ns 6 SMD00011AEC MN39143AT I Package Dimensions (unit: mm) * WDIP016-P-0500C 14.000.08 7.000.08 16 9 Mounting position-Up Reference plane 6.200.08 12.400.08 (12.77) 11.400.10 0.015 CCD (0.38) (R 0.50) Valid pixel center CCD Refractive index : 1.5 11.400.10 (0.60) (0.77) 1.78 0.460.05 0.46 M 1 8 16 9 3.900.20 1.300.10 0.80 (1.30) 3.400.15 1. The center of the package is equal to the center of the effective pixel area. 2. The rotation angle of the effective pixel area: up to 1.0 degree 3. The distance from the seal glass surface to the surface of the effective pixel area: 1.69 mm 0.10 mm 4. The tilt of the effective pixel area for the seal glass surface: up to 30 m 5. Thickness of the seal glass: 0.8 mm 0.10 mm, and the refractive index: 1.50 0.250.05 1 8 Mounting position-Bottom 12.700.25 SMD00011AEC 7 Request for your special attention and precautions in using the technical information and semiconductors described in this material (1) An export permit needs to be obtained from the competent authorities of the Japanese Government if any of the products or technologies described in this material and controlled under the "Foreign Exchange and Foreign Trade Law" is to be exported or taken out of Japan. (2) The technical information described in this material is limited to showing representative characteristics and applied circuit examples of the products. It does not constitute the warranting of industrial property, the granting of relative rights, or the granting of any license. (3) The products described in this material are intended to be used for standard applications or general electronic equipment (such as office equipment, communications equipment, measuring instruments and household appliances). Consult our sales staff in advance for information on the following applications: * Special applications (such as for airplanes, aerospace, automobiles, traffic control equipment, combustion equipment, life support systems and safety devices) in which exceptional quality and reliability are required, or if the failure or malfunction of the products may directly jeopardize life or harm the human body. * Any applications other than the standard applications intended. (4) The products and product specifications described in this material are subject to change without notice for reasons of modification and/or improvement. At the final stage of your design, purchasing, or use of the products, therefore, ask for the most up-to-date Product Standards in advance to make sure that the latest specifications satisfy your requirements. (5) When designing your equipment, comply with the guaranteed values, in particular those of maximum rating, the range of operating power supply voltage and heat radiation characteristics. Otherwise, we will not be liable for any defect which may arise later in your equipment. Even when the products are used within the guaranteed values, redundant design is recommended, so that such equipment may not violate relevant laws or regulations because of the function of our products. (6) When using products for which dry packing is required, observe the conditions (including shelf life and after-unpacking standby time) agreed upon when specification sheets are individually exchanged. (7) No part of this material may be reprinted or reproduced by any means without written permission from our company. Please read the following notes before using the datasheets A. These materials are intended as a reference to assist customers with the selection of Panasonic semiconductor products best suited to their applications. Due to modification or other reasons, any information contained in this material, such as available product types, technical data, and so on, is subject to change without notice. Customers are advised to contact our semiconductor sales office and obtain the latest information before starting precise technical research and/or purchasing activities. B. Panasonic is endeavoring to continually improve the quality and reliability of these materials but there is always the possibility that further rectifications will be required in the future. Therefore, Panasonic will not assume any liability for any damages arising from any errors etc. that may appear in this material. C. These materials are solely intended for a customer's individual use. Therefore, without the prior written approval of Panasonic, any other use such as reproducing, selling, or distributing this material to a third party, via the Internet or in any other way, is prohibited. 2001 MAR |
Price & Availability of MN39143AT
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |