|
If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
Datasheet File OCR Text: |
MK2716 HDTV CLOCK SYNTHESIZER Description The MK2716 is a low-cost, low jitter, high-performance PLL clock synthesizer designed to produce the 74.176 MHz and 74.25 MHz clocks necessary for HDTV systems. Using ICS' patented analog Phase-Locked Loop (PLL) techniques, the device accepts a 27 MHz crystal or clock input. The zero ppm synthesis error exactly locks the display to the digital stream. ICS manufactures the largest variety multimedia clock synthesizers for all applications. Consult ICS to eliminate crystals and oscillators from your board. For applications that require lower jitter, such as SDI and pixel clocks, use the ICS664. Features * * * * * * Packaged in 8-pin SOIC Available in Pb (lead) free package Input frequency of 27 MHz Zero ppm synthesis error in output clock 3.3 V or 5 V 10% operating supply Ideal for HDTV applications and oscillator manufacturers * 25 mA output drive capability at TTL levels * Advanced, low power, sub-micron CMOS process * Operating voltage of 3.3 V or 5 V Block Diagram VDD SEL Clock Synthesis and Control Circuitry Clock Buffer 27 MHz crystal or clock input X1 CLK 74.17582418 MHz or 74.2500 MHz 27.0000 MHz X2 2 GND MDS 2716 D I nt e gra t e d C ir c u it S y s te m s 1 5 2 5 R a c e S t r e e t S a n J o s e, C A 9 5 1 2 6 te l ( 40 8 ) 2 9 7 - 1 2 0 1 Revision 021605 w w w.i c s t . c o m MK2716 HDTV CLOCK SYNTHESIZER Pin Assignment ICLK/X1 VDD GND CLK 1 2 3 4 8 7 6 5 X2 27M SEL GND FREQUENCY SELECT TABLE SEL 0 1 CLK (MHz) 74.17582418 74.25 Pin Descriptions Pin Number 1 2 3 4 5 6 7 8 Pin Name ICLK/X1 VDD GND 27M GND SEL 27M X2 Pin Type XI Power Power Output Power Input Output XO Connect to +3.3 V or +5 V. Connect to ground. Pin Description Crystal connection. Connect to a 27 MHz fundamental crystal or clock. 74.17582418 MHZ or 74.25 MHz clock output (see table above). Connect to ground. Select pin determines value of CLK per table above. 27 MHz buffered clock or crystal oscillator output. Crystal connection. Connect to a 27 MHz crystal, or leave unconnected for clock input. External Components Decoupling Capacitor As with any high performance mixed-signal IC, the MK2716 must be isolated from system power supply noise to perform optimally. A decoupling capacitor of 0.01F must be connected between VDD and GND on pins 2 and 3. It must be connected close to the MK2716 to minimize lead inductance. Pin 5 can be connected to pin 3. No external power supply filtering is required for the MK2716. crystal should be used. The device crystal connections should include pads for small capacitors from X1 to ground and from X2 to ground. These capacitors are used to adjust the stray capacitance of the board to match the nominally required crystal load capacitance. Because load capacitance can only be increased in this trimming process, it is important to keep stray capacitance to a minimum by using very short PCB traces (and no vias) between the crystal and device. Crystal capacitors, if needed, must be connected from each of the pins X1 and X2 to ground. The value (in pF) of these crystal caps should equal (CL -16 pF)*2. In this equation, CL= crystal load capacitance in pF. Example: For a crystal with an 18 pF load capacitance, each crystal capacitor would be 4 pF [(18-16) x 2] = 4. Series Termination Resistor A 33 terminating resistor can be used next to the clock outputs for trace lengths over one inch. Crystal Load Capacitors The total on-chip capacitance is approximately 18 pF. A parallel resonant, fundamental mode, AT cut 27 MHz MDS 2716 D In t e gra te d C i r c u i t S ys t e m s 2 5 2 5 R a c e S t r e e t, S a n J o s e, C A 9 5 1 2 6 te l ( 4 08 ) 2 9 7 - 1 2 0 1 Revision 021605 w w w. ic s t . c o m MK2716 HDTV CLOCK SYNTHESIZER Absolute Maximum Ratings Stresses above the ratings listed below can cause permanent damage to the MK2716. These ratings, which are standard values for ICS commercially rated parts, are stress ratings only. Functional operation of the device at these or any other conditions above those indicated in the operational sections of the specifications is not implied. Exposure to absolute maximum rating conditions for extended periods can affect product reliability. Electrical parameters are guaranteed only over the recommended operating temperature range. Item Supply Voltage, VDD All Inputs and Outputs Ambient Operating Temperature Storage Temperature Soldering Temperature 7V Rating -0.5 V to VDD+0.5 V 0 to +70C -65 to +150C 260C Recommended Operation Conditions Parameter Ambient Operating Temperature Power Supply Voltage (measured in respect to GND) Min. 0 +3.0 Typ. Max. +70 +5.5 Units C V DC Electrical Characteristics VDD=5 V unless otherwise noted, Ambient temperature 0 to +70C Parameter Operating Voltage Input High Voltage Input Low Voltage Output High Voltage Output Low Voltage Operating Supply Current Short Circuit Current Input Capacitance Symbol VDD VIH VIL VOH VOL IDD Conditions Min. 3.0 2.0 Typ. 5 Max. 5.5 0.8 Units V V V V V mA mA pF IOH = -4 mA IOL = 16 mA No load Each output VDD-0.4 0.4 30 +50 7 CIN S0, S1 pins MDS 2716 D In t e gra te d C i r c u i t S ys t e m s 3 5 2 5 R a c e S t r e e t, S a n J o s e, C A 9 5 1 2 6 te l ( 4 08 ) 2 9 7 - 1 2 0 1 Revision 021605 w w w. ic s t . c o m MK2716 HDTV CLOCK SYNTHESIZER AC Electrical Characteristics VDD = 5 V unless otherwise noted, Ambient Temperature 0 to +70C Parameter Input Frequency Frequency Error, Output Clock Output Clock Rise Time Output Clock Fall Time Output Clock Duty Cycle Maximum Absolute Jitter, short term Symbol FIN tOR tOF tja Conditions Min. Typ. 27 Max. Units MHz 0 ppm ns ns % ps 1.5 1.5 0.8 to 2.0 V 2.0 to 8.0 V at 1.4 V Deviation from mean 40 50 200 60 Thermal Characteristics Parameter Thermal Resistance Junction to Ambient Symbol JA JA JA JC Conditions Still air 1 m/s air flow 3 m/s air flow Min. Typ. 150 140 120 40 Max. Units C/W C/W C/W C/W Thermal Resistance Junction to Case Marking Diagram 8 5 Marking Diagram (Pb free) 8 5 MK2716S ###### YYWW 1 4 1 2716SLF ###### YYWW 4 Notes: 1. ###### is the lot number. 2. YYWW is the last two digits of the year and week that the part was assembled. 3. "LF" denotes Pb (lead) free package. 4. Bottom marking: (origin) Origin = country of origin if not USA MDS 2716 D In t e gra te d C i r c u i t S ys t e m s 4 5 2 5 R a c e S t r e e t, S a n J o s e, C A 9 5 1 2 6 te l ( 4 08 ) 2 9 7 - 1 2 0 1 Revision 021605 w w w. ic s t . c o m MK2716 HDTV CLOCK SYNTHESIZER Package Outline and Package Dimensions (8-pin SOIC, 150 Mil. Narrow Body) Package dimensions are kept current with JEDEC Publication No. 95 Millimeters 8 Inches Min Max Symbol Min Max E INDEX AREA H 12 D A A1 B C D E e H h L 1.35 1.75 0.10 0.25 0.33 0.51 0.19 0.25 4.80 5.00 3.80 4.00 1.27 BASIC 5.80 6.20 0.25 0.50 0.40 1.27 0 8 .0532 .0688 .0040 .0098 .013 .020 .0075 .0098 .1890 .1968 .1497 .1574 0.050 BASIC .2284 .2440 .010 .020 .016 .050 0 8 A A1 h x 45 C -Ce B SEATING PLANE L .10 (.004) C Ordering Information Part / Order Number MK2716S MK2716STR MK2716SLF MK2716SLFTR Marking MK2716S MK2716S 2716SLF 2716SLF Shipping Packaging Tubes Tape and Reel Tubes Tape and Reel Package 8-pin SOIC 8-pin SOIC 8-pin SOIC 8-pin SOIC Temperature 0 to +70 C 0 to +70 C 0 to +70 C 0 to +70 C While the information presented herein has been checked for both accuracy and reliability, Integrated Circuit Systems (ICS) assumes no responsibility for either its use or for the infringement of any patents or other rights of third parties, which would result from its use. No other circuits, patents, or licenses are implied. This product is intended for use in normal commercial applications. Any other applications such as those requiring extended temperature range, high reliability, or other extraordinary environmental requirements are not recommended without additional processing by ICS. ICS reserves the right to change any circuitry or specifications without notice. ICS does not authorize or warrant any ICS product for use in life support devices or critical medical instruments. MDS 2716 D In t e gra te d C i r c u i t S ys t e m s 5 5 2 5 R a c e S t r e e t, S a n J o s e, C A 9 5 1 2 6 te l ( 4 08 ) 2 9 7 - 1 2 0 1 Revision 021605 w w w. ic s t . c o m (This is the Right Page master -- don't use, use Left Page only) |
Price & Availability of MK2716 |
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |