View MN101C66D_256261.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

MN101C66D
Type ROM (x8-bit) x RAM (x 8-bit) x Package Minimum Instruction Execution Time
QFP084-P-1818E *Pb free, MN101C66D (under development) 64 K 2K LQFP080-P-1414A *Pb free, TQFP080-P-1212D *Pb free (under plannning)
0.1 s (at 4.5 V to 5.5 V, 20 MHz) 0.25 s (at 2.7 V to 5.5 V, 8 MHz)*1 62.5 s (at 2.0 V to 5.5 V, 32 kHz)*1, 2 1 The lower limit for operation guarantee for flash memory built-in type is 4.5 V. * *2 The lower limit for operation guarantee for EPROM built-in type is 2.3 V. * RESET * Watchdog * External 0 * External 1 * External 2 * External 3* 1 * External 4 (key interrupt dedicated) * Timer 0 * Timer 1 * Timer 2 * Timer 3 * Timer 6 * Time base * Timer 7 (2 systems) * Timer 8 (2 systems) * Serial 0 (2 systems) * Serial 2 * A/D conversion finish *1 LQFP080-P-1414A,TQFP080-P-1212D: Not mounted Timer counter 0 : 8-bit x 1 (square-wave/8-bit PWM output, event count, generation of remote control carrier, simple pulse width measurement) (square-wave/PWM output to large current terminal P50 possible) Clock source ********************* 1/2, 1/4 of system clock frequency; 1/1, 1/4, 1/16, 1/32, 1/64 of OSC oscillation clock frequency; 1/1 of XI oscillation clock frequency; external clock input Interrupt source **************** coincidence with compare register 0 Timer counter 1 : 8-bit x 1 (square-wave output, event count, synchronous output event) Clock source ********************* 1/2, 1/8 of system clock frequency; 1/1, 1/4, 1/16, 1/8192, 1/32768 of OSC oscillation clock frequency; 1/1 of XI oscillation clock frequency; external clock input Interrupt source **************** coincidence with compare register 1 Timer counter 0, 1 can be cascade-connected. Timer counter 2 : 8-bit x 1 (square-wave output, additional pulse type 10-bit PWM output, event count, synchronous output event, simple pulse width measurement) (square-wave/PWM output to large current terminal P52 possible) Clock source ********************* 1/2, 1/4 of system clock frequency; 1/1, 1/4, 1/16, 1/32, 1/64 of OSC oscillation clock frequency; 1/1 of XI oscillation clock frequency; external clock input Interrupt source **************** coincidence with compare register 2 Timer counter 3 : 8-bit x 1 (square-wave output, event count, generation of remote control carrier, serial 0 baud rate timer) Clock source ********************* 1/2, 1/8 of system clock frequency; 1/1, 1/4, 1/16, 1/64, 1/128 of OSC oscillation clock frequency; 1/1 of XI oscillation clock frequency; external clock input Interrupt source **************** coincidence with compare register 3 Timer counter 2, 3 can be cascade-connected. Timer counter 6 : 8-bit freerun timer Clock source ********************* 1/1 of system clock frequency; 1/1, 1/4096, 1/8192 of OSC oscillation clock frequency; 1/1, 1/4096, 1/8192 of XI oscillation clock frequency Interrupt source **************** coincidence with compare register 6 Timer counter 7 : 16-bit x 1 (square-wave output, IGBT/16-bit PWM output (cycle / duty continuous variable), event count, synchronous output evevt, pulse width measurement, input capture) (square-wave/PWM output to large current terminal P51 possible) Clock source ********************* 1/1, 1/2, 1/4, 1/16 of system clock frequency; 1/1, 1/2, 1/4, 1/16 of OSC oscillation clock frequency; 1/1, 1/2, 1/4, 1/16 of external clock input frequency Interrupt source **************** coincidence with compare register 7 (2 lines)
Interrupts
Timer Counter
72
MAD00017BEM
MN101C66D
Timer Counter (Continue)
Timer counter 8: 16 bit x 1 (square-wave/16-bit PWM output [duty continuous variable], event count, pulse width measurement, inputcapture) (square-wave/PWM output to large current terminal P53 possible) Clock source ********************* 1/1, 1/2, 1/4, 1/16, 1/128 of system clock frequency; 1/1, 1/2, 1/4, 1/16, 1/128 of OSC oscillation clock frequency; 1/1, 1/2, 1/4, 1/16 of external clock input frequency Interrupt source **************** coincidence with compare register 8 (2 lines) Timer counters 7, 8 can be cascade-connected. (square-wave output, PWM, input capture, pulse width measurement is possible as a 32-bit timer.) Time base timer (one-minute count setting) Clock source ********************* 1/1 of OSC oscillation clock frequency; 1/1 of XI oscillation clock frequency Interrupt source **************** 1/128, 1/256, 1/512, 1/1024, 1/8192, 1/32768 of clock source frequency Watchdog timer Interrupt source **************** 1/65536, 1/262144, 1/1048576 of system clock frequency
Serial Interface
Serial 0 : synchronous type/UART (full-duplex) x 1 Clock source ********************* 1/2, 1/4 of system clock frequency; pulse output of timer counter 3; 1/2, 1/4, 1/16, 1/64 of OSC oscillation clock frequency Serial 2 : synchronous type x 1 Clock source ********************* 1/2, 1/4 of system clock frequency; pulse output of timer counter 3; 1/2, 1/4, 1/16, 1/32 of OSC oscillation clock frequency
I/O Pins
I/O Input
61 (60) 4 (3)
* Common use * Specified pull-up resistor available * Input/output selectable (bit unit) ( ): LQFP080-P-1414A,TQFP080-P-1212D * Common use * Specified pull-up resistor available ( ): LQFP080-P-1414A,TQFP080-P-1212D
A/D Inputs LCD
10-bit x 8-ch. (with S/H) 32 segments x 4 commons (static, 1/2, 1/3, or 1/4 duty) LCD power supply separated from VDD (usable if VLCD VDD) LCD power shunt resistance contained Buzzer output, remote control carrier signal output, high-current drive port
Special Ports Electrical Characteristics
Supply current
Limit Parameter Symbol IDD1 Operating supply current IDD2 IDD3 IDD4 Supply current at HALT IDD5 IDD6 Supply current at STOP IDD7 Condition min fosc = 20 MHz, VDD = 5 V fosc = 8 MHz, VDD = 5 V fx = 32 kHz, VDD = 3 V fx = 32 kHz, VDD = 3 V, Ta = 25C fx = 32 kHz, VDD = 3 V, Ta = -40C to +85C VDD = 5 V, Ta = 25C VDD = 5 V, Ta = -40C to +85C typ 25 10 30 4 max 60 25 100 8 30 2 50 mA mA A A A A A Unit
See the next page for pin assignment and support tool.
MAD00017BEM
73
Pin Assignment
P47/KEY7/SEG24/SDO7 P46/KEY6/SEG25/SDO6 P45/KEY5/SEG26/SDO5 P44/KEY4/SEG27/SDO4 P43/KEY3/SEG28/SDO3 P42/KEY2/SEG29/SDO2 P41/KEY1/SEG30/SDO1 P47/KEY7/SEG24/SDO7 P46/KEY6/SEG25/SDO6 P45/KEY5/SEG26/SDO5 P44/KEY4/SEG27/SDO4 P43/KEY3/SEG28/SDO3 P42/KEY2/SEG29/SDO2 P41/KEY1/SEG30/SDO1 P40/KEY0/SEG31/SDO0 P40/KEY0/SEG31/SDO0 P21/IRQ1/ACZ P21/IRQ1/ACZ
44
P67/SEG16
P66/SEG17
P65/SEG18
P64/SEG19
P63/SEG20
P62/SEG21
P61/SEG22
P67/SEG16
P66/SEG17
P65/SEG18
P64/SEG19
P63/SEG20
P62/SEG21
P61/SEG22
P60/SEG23
P60/SEG23
P23/IRQ3
P22/IRQ2
45
P22/IRQ2
P20/IRQ0
VDD
63
62
61
60
59
58
57
56
55
54
53
52
51
50
49
48
47
46
60
59
58
57
56
55
54
53
52
51
50
49
48
47
46
45
44
43
42
41
P70/SEG15 P71/SEG14 P72/SEG13 P73/SEG12 P74/SEG11 P75/SEG10 P76/SEG9 P77/SEG8 P80/SEG7 P81/SEG6 P82/SEG5 P83/SEG4 P84/SEG3 P85/SEG2 P86/SEG1 P87/SEG0 COM0/P30 COM1/P31 COM2/P32 COM3/P33
61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80
10 11 12 13 14 15 16 17 18 19 20
40 39 38 37 36 35 34 33
TM8IO/P15 TM7IO/P14 TM3IO/P13 TM2IO/P12 TM1IO/P11 RMOUT/TM0IO/P10 BUZZER/P06 SBT2/P05 SBI2/P04 SBO2/P03 SBT0/P02 RXD/SBI0/P01 TXD/SBO0/P00 VDD VREFAN7/PA7 AN6/PA6 AN5/PA5 AN4/PA4 AN3/PA3
P70/SEG15 P71/SEG14 P72/SEG13 P73/SEG12 P74/SEG11 P75/SEG10 P76/SEG9 P77/SEG8 P80/SEG7 P81/SEG6 P82/SEG5 P83/SEG4 P84/SEG3 P85/SEG2 P86/SEG1 P87/SEG0 NC COM0/P30 COM1/P31 COM2/P32 COM3/P33
64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 10 11 12 13 14 15 16 17 18 19 20 1 2 3 4 5 6 7 8 9
43
P20/IRQ0
VDD
42 41 40 39 38 37 36 35 34
TM8IO/P15 TM7IO/P14 TM3IO/P13 TM2IO/P12 TM1IO/P11 RMOUT/TM0IO/P10 BUZZER/P06 SBT2/P05 SBI2/P04 SBO2/P03 SBT0/P02 RXD/SBI0/P01 TXD/SBO0/P00 VDD VREFAN7/PA7 AN6/PA6 AN5/PA5 AN4/PA4 AN3/PA3 AN2/PA2
MN101C66D
32 31 30 29 28 27 26 25 24 23 22 21
MN101C66D
33 32 31 30 29 28 27 26 25 24 23 22 21
1
2
3
4
5
6
7
8
9
VLC1
VLC2
VLC3
TM0O/LED0/P50
TM7O/LED1/P51
TM2O/LED2/P52
TM8O/LED3/P53
NATRST
OSC2
OSC1
MMOD
XI
XO
VDD
NRST/P27
VREF+
AN0/PA0
AN0/PA0
AN1/PA1
TM7O/LED1/P51
TM2O/LED2/P52
LQFP080-P-1414A *Pb free TQFP080-P-1212D *Pb free (under plannnig)
TM8O/LED3/P53
NRST/P27
AN2/PA2
QFP084-P-1818E *Pb free
Support Tool
In-circuit Emulator EPROM Built-in Type
PX-ICE101C / D + PX-PRB101C66-QFP084-P-1818E-M PX-ICE101C / D + PX-PRB101C66-LQFP080-P-1414A-M Type ROM (x 8-bit) RAM (x 8-bit) Minimum instruction execution time MN101CP66D(under development) 64 K 2K 0.1 s (at 4.5 V to 5.5 V, 20 MHz) 0.25 s (at 2.7 V to 5.5 V, 8 MHz) 62.5 s (at 2.3 V to 5.5 V, 32 kHz) Package LQFP080-P-1414A *Pb free, QFP084-P-1818E *Pb free , TQFP080-P-1212D *Pb free (under planning)
Flash Memory Built-in Type
Type ROM (x 8-bit) RAM (x 8-bit) Minimum instruction execution time
MN101CF66D [ES (Engineering Sample) available] 64 K 2K 0.1 s (at 4.5 V to 5.5 V, 20 MHz) 0.25 s (at 4.5 V to 5.5 V, 8 MHz) 62.5 s (at 4.5 V to 5.5 V, 32 kHz)
Package
LQFP080-P-1414A *Pb free, QFP084-P-1818E *Pb free, TQFP080-P-1212D *Pb free (under planning)
74
AN1/PA1
N.C
N.C
OSC2
VLC1
VLC2
VLC3
OSC1
VDD
MMOD
VREF+
VSS
VSS
XI
N.C
N.C
XO
MAD00017BEM
Request for your special attention and precautions in using the technical information and semiconductors described in this material
(1) An export permit needs to be obtained from the competent authorities of the Japanese Government if any of the products or technologies described in this material and controlled under the "Foreign Exchange and Foreign Trade Law" is to be exported or taken out of Japan. (2) The technical information described in this material is limited to showing representative characteristics and applied circuit examples of the products. It does not constitute the warranting of industrial property, the granting of relative rights, or the granting of any license. (3) The products described in this material are intended to be used for standard applications or general electronic equipment (such as office equipment, communications equipment, measuring instruments and household appliances). Consult our sales staff in advance for information on the following applications: * Special applications (such as for airplanes, aerospace, automobiles, traffic control equipment, combustion equipment, life support systems and safety devices) in which exceptional quality and reliability are required, or if the failure or malfunction of the products may directly jeopardize life or harm the human body. * Any applications other than the standard applications intended. (4) The products and product specifications described in this material are subject to change without notice for reasons of modification and/or improvement. At the final stage of your design, purchasing, or use of the products, therefore, ask for the most up-to-date Product Standards in advance to make sure that the latest specifications satisfy your requirements. (5) When designing your equipment, comply with the guaranteed values, in particular those of maximum rating, the range of operating power supply voltage and heat radiation characteristics. Otherwise, we will not be liable for any defect which may arise later in your equipment. Even when the products are used within the guaranteed values, redundant design is recommended, so that such equipment may not violate relevant laws or regulations because of the function of our products. (6) When using products for which dry packing is required, observe the conditions (including shelf life and after-unpacking standby time) agreed upon when specification sheets are individually exchanged. (7) No part of this material may be reprinted or reproduced by any means without written permission from our company.
Please read the following notes before using the datasheets
A. These materials are intended as a reference to assist customers with the selection of Panasonic semiconductor products best suited to their applications. Due to modification or other reasons, any information contained in this material, such as available product types, technical data, and so on, is subject to change without notice. Customers are advised to contact our semiconductor sales office and obtain the latest information before starting precise technical research and/or purchasing activities. B. Panasonic is endeavoring to continually improve the quality and reliability of these materials but there is always the possibility that further rectifications will be required in the future. Therefore, Panasonic will not assume any liability for any damages arising from any errors etc. that may appear in this material. C. These materials are solely intended for a customer's individual use. Therefore, without the prior written approval of Panasonic, any other use such as reproducing, selling, or distributing this material to a third party, via the Internet or in any other way, is prohibited.
2001 MAR

▲Up To Search▲

Price & Availability of MN101C66D

	To Download MN101C66D Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .