View PH967C6_246181.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

SPECIFICATION
Device Name : SILICON DIODE Type Name Spec.No. : PH967C6 : MS5D1445
Fuji Electric Co.,Ltd. Matsumoto Factory
Fu ji Electric Co.,Ltd.
MS5D1445
1/12
Revised Records
Date JUN.-1 -2001 JAN.-28 -2002 alteration a Eadd test items * Classification enactment Ind. Content Applied date Issued date Issued date Drawn Checked Checked Approved
K. SAKURAI
T. HOSEN
Fuji Electric Co.,Ltd.
MS5D1445
2/12
1. SCOPE This specification provides the ratings and the test requirement for FUJI SILICON DIODE PH967C6 2. Application PFC circuit(current continuous mode) This diode is a product which optimizes the diode characteristic for the PFC circuit.This product is a product by which the trr characteristic was valued more than VF though there is a relation of the trade-off up to VF and Trr.The total loss of the PFC circuit can be suppressed by shortening trr. 3. OUT VIEW, MARKING, MOLDING RESIN, CHARACTERISTICS (1) Out view is shown MS5D1445 9/12 (2) Marking is shown MS5D1445 9/12 It is marked to type name or abbreviated type name, polarity and Lot No. (3) Molding resin Epoxy resin UL:V-0 (4) Characteristics is shown MS5D1445 10/12~12/12 4. RATINGS 4.1 MAXIMUM RATINGS ITEM Repetitive peak reverse voltage Non-repetitive peak reverse voltage Surge peak forward current Peak forward current Average output current Non-repetitive surge current Operating junction temperature Storage temperature SYMBOL VRRM VRSM Ips Ip I0 IFSM Tj Tstg Square wave duty =1/2 Tc = 110*Z * @ 40
-40~*{ 150 -40~*{ 150 tw*... 200ns
CONDITIONS
RATINGS 600 600 40 * 30 * 10 *
UNITS V V A A A A C C
Sine wave 10ms 1shot
* Out put current of centertap full wave connection. 4.2 ELECTRICAL CHARACTERISTICS ITEM Reverse recovery peak current** Reverse recovery time ** Forward voltage ** Reverse current** Thermal resistance SYMBOL IRP trr VF IR (at Ta=25*Z unless otherwise specified.) CONDITIONS IF=5A,-di/dt=200A/E s,VR=380V Tj=100*Z IF=0.1A,IR=0.2,Irec=0.05A IF = 15 A VR = VRRM MAXIMUM Typ. Max. Max. Max. Max. 2.0 30.0 5.0 50.0 1.5 UNITS A ns V C/W
Rth(j-c) Junction to case **Rating per element
4.3 MECHANICAL CHARACTERISTICS Mounting torque Approximate mass Recommended torque 0.4* 0.6 4.9 N m g
Fuji Electric Co.,Ltd.
MS5D1445
3/12
5.TEST
Test Test No. Items 1 Terminal Strength (Tensile) Testing methods and Conditions Reference Sampling Acceptance Standard number number EIAJ ED4701
2 Terminal Strength (Bending)
3 Mounting Strength
4 Vibration
5 Shock
6 Solderability
7 Resistance to Soldering Heat
Pull force TO-220,TO-220F : 10N TO-3P,TO-3PF,TO-247 : 25N TO-3PL : 45N T-Pack,K-Pack : 10N Force maintaining duration :301s Load force TO-220,TO-220F : 5N TO-3P,TO-3PF,TO-247 : 10N TO-3PL : 15N T-Pack,K-Pack : 5N Number of times :2times(90deg./time) Screwing torque value: (M3) TO-220,TO-220F : 4010N TO-3P,TO-3PF,TO-247 : 5010N TO-3PL : 7010N frequency : 100Hz to 2kHz 2 Acceleration : 100m/s Sweeping time : 4min./1 cycle 4times for each X,Y&Z directions. 2 Peak amplitude: 15km/s Duration time : 0.5ms 3times for each X,Y&Z directions. Solder temp. : 2355C Immersion time : 50.5s Each terminal shall be immersed in the solder bath within 1 to 3.0mm from the body. Solder temp. : 2605C Immersion time : 101s Number of times : 1times
A-111A method 1
5
A-111A method 3
5
Mechanical test
(0:1)
A-112 method 2 5
A-121
5
A-122 test code D
5
A-131A test code A
5
A-132
5
Fuji Electric Co.,Ltd.
MS5D1445
4/12
Test Test No. Items 1 High Temp. Storage 2 Low Temp. Storage 3 Temperature Humidity Storage 4 Temperature Humidity Bias 5 Unsaturated Pressurized Vapor 6 Temperature Cycle
Testing methods and Conditions
7 Thermal Shock
8 Steady state Operating life 9 Intermittent Operating Life 10 High Temp. Reverse Bias
Temperature :s stg max Test duration : 1000h Temperature : Tstg min Test duration : 1000h Temperature : 852C Relative humidity : 855% Test duration : 1000h Temperature : 852C Relative humidity : 855% Bias Voltage : VRRM*~ 0.8 Test duration : 1000h Temperature : 1202C Relative humidity : 855% Vapor pressure : 170kPa Test duration : 96h High temp.side : Tstg max Room temp. : 5* 35*Z Low temp.side : Tstg min Duration time : HT 30min,RT 5min LT 30min Number of cycles : 100 cycles Fluid : pure water(running water) High temp.side : 100+0/-5C Low temp.side : 0+5/-0C Duration time : HT 5min,LT 5min Number of cycles : 100 cycles Ta=255C Rated load Test duration : 1000h Tj=Tjmax * 50*Z
Reference Sampling Acceptance Standard number number EIAJ ED4701 B-111A 22 B-112A B-121A test code C 22
22
Endurance test
B-122A test code C
22
(0:1)
B-123A test code B 22
B-131A
22
B-141A test code A
22
D-402
22
3min ON, 3min OFF
Test duration : 10000cy Temperature : Ta= 100 C Bias Voltage : VR=VRRM duty=1/2 Test duration : 1000h IR *... USL x 5 VF*... USL x 1.1
D-403
22
(0:1)
D-404
22
Failure Criteria
USL:Upper specification Limit
Fuji Electric Co.,Ltd.
MS5D1445
5/12
.Cautions 6 Elthough Fuji Electric is continully imroving roduct ulit *A ap p qa percentage of semiconductor products may become faulty.hen us W eiconductor roducts in our re requested to tae dequte sm p y a ka a eures to revet the equipet rom cauing syhpical injury m sa p n mnf s case any of the products fail.It is recommended to make your d retardant,and free of malunction. f Ee roducts described in this Specification re intended or u * hT p a f and electrical equipment which has normal reliability requirem *EComputers *EOA equipment *ECommunications equipment(Terminal dev Eeuremet equipet Ecie tools * M sa n m n * aM h n EVA equi * *EElectrical home apliances *Eersonal equipment P *Endustr I etc. Ee roducts described in this Specification re ot desied o * hT p an ng equipet or tems used under lifetreatenign ituation.fI mn sy -h s s thee roducts in the equipet listed elow,irst check the s sp mn b f required reliability. Erortation equipetutomobiles,trai,i,etc.) * T psna m n a( sn h s sp *Eackbone network equipment B *ETrafic-sinal control equip g EsaG lr, leae sag uto reaers * a a sm gak a bk ESurine repeter equi * amb a *Eurglar alarms,ire alarms,emergency equipment B f *EMedical equi *Euclear control equipment N etc. o ot use the roducts in this Specification or equipmet requ Dn p f n not limited to): *EAerospace equipment *EAeronautical equipment .risng 7 aW n Ee iodes ould e used in roducts ithin their baolute xam * hT D hs b p w s current, temperature,etc.).The Diodes may be destroyed if used *EThe equipment containing Diodes should have adequate fuses or p equipet rom cauing econdry destruction. mnf ss a *Ee the Diodes within their reliability and lifetime under cert sU The Diodes may fail before the target lifetime of your product condition. s Eou ut desing the iodes to e operated ithin the ecified *Y ms D b w ps current,temerature,etc.)toprevet oile ilure or destruc p n p s b af EConider the oile temerature rise ot only or the junctio * s p sb p n f lead. s Eo ot directly touch the leads or ce of the iodes ile *D n ap gak D hw operation,to oid electric ock d urn. va hs na b s imaum ratinv(ltae, gg eod the ratin. byn g rotection to revet the pn in enironets or condition. a v mn s s if used under certain reliability mimum ratinv(oltae, ax sg g tion of devices. n d cae, ut lo or the na s b a s f power is uplied or during s y and reliability,a msall ing Fuji Electric ety a fs , ire,or other problem in f esing afil-ae,flame fs e in the ollowign electronic s f ent. s ices) pment ial robots r manufactured tobe used in ou re conidering using ya s tem contruction d sy s na ment pment pment
iring trict reliability uch (absut s s
Fuji Electric Co.,Ltd.
MS5D1445
6/12
*EThe Diodes are made of incombustible material.However,if a Diod of flame.Also,operating the Diodes near any flamble place or Diodes to emit smoe or flame in case the Diodes become even h k eing the rraeet to revet the read of ire. Ds a gn m n p n ps f Ee iodes ould ot used in na enironet in the resece of * hT D hs n v mn pn corrosive ydrogen ulfide,sulfurous acid .) h (a sg s a sg Ee iodes ould ot used in na irradiated ield ice they r * hT D hs n f sn a atallation snI ESoldering inolves temeratures ich exceed the device torae * v p hw sg avoid device dame and to enure reliability, oberve the ol ag s s f quality asurance standard. *ESolder temperature and duration(through-ole package) Solder temperature 260*}5Z Z*01} 53 10*}second ..econd 3 0}* s5 uration D
e fails,it may emit smoe k material may caue the s otter during operation. acid,organic matter,or e not radiation-proof.
temerature ratin.o p gT lowign uidelines rom the g f
Ee imersion depth of the lead ould ically e up to the l * hT m hs sab b hould be a mimum of 1.5m rom the device. s ax f Een lowolderin,tae care to oid imersing the ce in * hW f sgk va m ap gak EReer to the ollowign torque reference en ounting the devic *f f hW m torque aplied to the mounting screw causes damage to the devi increase the thermal resistance, both of which conditions may Table Recommended tightening torque 1: ace tle P gak s y Screw OT 02 OT F 02 OT P3OF T P3OT 742OT L P33M 3M 3M Recomeded tigtenign mn h torque cm N05- 3 cm N06- 4 cm N08- 6
ead stopper and the distance the older th. s ab e on a et ikn. Excess has ce and weak torque will destory the device.
Ee et ikn ould e a ltes ithimE05}*n d rouges * hT h a s hs vah f a n w na nh lo,keep the tigtenign torque ithin the limits of this ec As h w ps *Emproper handling may caue isolation breakdown leading to a cr I s *EWe recommend the use of thermal compound to optimize the effici important to evenly aply the compound and to eliminate any ai Storae g Ee iodes ut e tored t a tdrd temerature of 5 to 53 * hT D msb s a s na a p to 75%.fI the storage area is very dry,a humidifier may be req deionized water or boiled water,since the chlorine in tap wate *EThe Diodes should not be subjected to rapid changes in temperat on the suface of the Diodes.herfore,store the Diodes in a pla T tead. sy Ee iodes ould ot e tored on top of each other,sice this * hT D hs n bs n externl orce on the cae. af s Ee iodes ould ot e tored ith the lead termils remini * hT D hs n bs w na a caue resoldered conections to o il during later rocesi sp n g af p s Ee iodes ould e tored in tisttic contiers or iin * hT D hs bs na a an hs p
within 10Em. ification. itical accident. ency of heat radiation.t is I r iods. v
*Z and relative humidity of 45 uired.In uch a cae,use only s s r may corrode the leads. ure to oid condention va as ce ere the temperature is hW yam caue excesie s sv gn unrocesed.Rut yam p s s . gn g. bs a g
Fuji Electric Co.,Ltd.
MS5D1445
7/12
8.Apendix Eee roducts do ot contin ODBsP or . * hT s p n a sB P Eee roducts,elies,or comoets do ot contin yna of t * hT s p s a bm pnn n a utces. s sb na rohibited utces: P s sb na CFCs,halon,carbon tetrachloride,1,1,1-trichloroethane(metyl ch ee roducts,elies,or comoets re ot uctured usi hT s p s a bm p n n a n nam af above-mentioned substances. rohibited utces: P s sb na CFCs,halon,carbon tetrachloride,1,1,1-trichloroethane(methyl chl *EfI you have any questions about any part of this Specification, les eteore using the roduct as ga n b f p Eeither Fuji or its ets ll e eld liale or yna injury *N n ga n ahs b h bf ccordace ith the intruction. a nw s s *EThe aplication examples described in this specification are me roducts. p is ecification does ot coner yna industrial roperty rig hT ps n f p licene or uch rigt. sf s hs he above-mentioned loroform) gn yna of the oroform) leae contct Fuji Electric or its ps a caued yb using the roducts ot in s p n rely tyical uses of Fuji Electric p ts or other rigt, or contitute a h hs n s
Fuji Electric Co.,Ltd.
MS5D1445
8/12
Fuji Electric Co.,Ltd.
MS5D1445
9/12
Forward Characteristic (typ.)
100
Reverse Characteristic (typ.)
Tj=150C Tj=125C
10
Tj=100C
IF Forward Current (A)
Tj=150C
1
Tj=125C Tj=100C Tj=25C
IR Reverse Current (A)
Tj=25C
0.1
0.01 0.0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0 4.5
VR Reverse Voltage (V)
VF Forward Voltage (V)
Forward Power Dissipation
25 0.045
Reverse Power Dissipation
0.040
DC
20 0.035
(W)
15 Square wave =60 Square wave =120 Sine wave =180 Square wave =180 10
0.030
Reverse Power Dissipation
0.025
0.020
=180
0.015
PR
0.010 5 0.005 Per 1element 0 0 1 2 3 4 5 6 0.000 0 100 200 300 400 500 600 700
Io
Average Forward Current
(A)
VR
Reverse Voltage
(V)
Fuji Electric Co.,Ltd.
MS5D1445
10/12
Current Derating (Io-Tc)
160 1000
Junction Capacitance Characteristic (typ.)
150
140
130 100 120
Case Temperature
110
Square wave =180C Sine wave =180C
100
Square wave =120C
90
Cj
80 70 Square wave =60C 60 50 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15
Junction Capacitance (pF)
10 1 1 10 100
DC
Tc
(C)
Io
Average Output Current
(A)
VR
Reverse Voltage (V)
:Conduction angle of forward current for each rectifier element
Io:Output current of center-tap full wave connection
Surge Capability
100
Peak Half - Wave Current IFSM
(A)
10 1 1 10 100
Number of Cycles at 50Hz
Fuji Electric Co.,Ltd.
MS5D1445
11/12
Transient Thermal Impedance
10
1
(C/W)
10
0
Transient Thermal Impedance
10
-1
10
-2
10
-3
10
-2
10
-1
10
0
10
1
10
2
t
Time
(sec)
Fuji Electric Co.,Ltd.
MS5D1445
12/12

▲Up To Search▲

Price & Availability of PH967C6

	To Download PH967C6 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .