View MUR2100ED_202109.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

MUR2100E
Preferred Device
SWITCHMODETM Power Rectifier
Ultrafast "E" Series with High Reverse Energy Capability
. . . designed for use in switching power supplies, inverters and as free wheeling diodes, these state-of-the-art devices have the following features:
http://onsemi.com
* 20 mjoules Avalanche Energy Guaranteed * Excellent Protection Against Voltage Transients in Switching * * * * *
Inductive Load Circuits Ultrafast 75 Nanosecond Recovery Time 175C Operating Junction Temperature Low Forward Voltage Low Leakage Current High Temperature Glass Passivated Junction
ULTRAFAST RECTIFIER 2 AMPERES 1000 VOLTS
Mechanical Characteristics
* Case: Epoxy, Molded * Weight: 0.4 gram (approximately) * Finish: All External Surfaces Corrosion Resistant and Terminal * * * * *
Leads are Readily Solderable Lead and Mounting Surface Temperature for Soldering Purposes: 220C Max. for 10 Seconds, 1/16 from case Shipped in plastic bags, 1000 per bag Available Tape and Reeled, 5000 per reel, by adding a "RL'' suffix to the part number Polarity: Cathode Indicated by Polarity Band Marking: MUR2100E
AXIAL LEAD CASE 059-04 PLASTIC
MARKING DIAGRAM
MUR2100E
MAXIMUM RATINGS
Rating Peak Repetitive Reverse Voltage Working Peak Reverse Voltage DC Blocking Voltage Average Rectified Forward Current (Note 1.) (Square Wave Mounting Method #3 Per Note 3.) Non-Repetitive Peak Surge Current (Surge applied at rated load conditions, halfwave, single phase, 60 Hz) Operating Junction Temperature and Storage Temperature Range Symbol VRRM VRWM VR IF(AV) Value 1000 Unit Volts MUR2100E = Device Code
2.0 @ TA = 35C 35
Amps
ORDERING INFORMATION
Device Package Axial Lead Axial Lead Shipping 1000 Units/Bag 5000/Tape & Reel
IFSM
Amps
MUR2100E MUR2100ERL
TJ, Tstg
-65 to +175
C
Preferred devices are recommended choices for future use and best overall value.
1. Pulse Test: Pulse Width = 300 s, Duty Cycle 2.0%.
(c) Semiconductor Components Industries, LLC, 2000
1
October, 2000 - Rev. 1
Publication Order Number: MUR2100E/D
MUR2100E
THERMAL CHARACTERISTICS
Characteristic Maximum Thermal Resistance, Junction to Ambient Symbol RJA Value See Note 3. Unit C/W
ELECTRICAL CHARACTERISTICS
Maximum Instantaneous Forward Voltage (Note 2.) (IF = 2.0 Amp, TJ = 150C) (IF = 2.0 Amp, TJ = 25C) Maximum Instantaneous Reverse Current (Note 2.) (Rated dc Voltage, TJ = 100C) (Rated dc Voltage, TJ = 25C) Maximum Reverse Recovery Time (IF = 1.0 Amp, di/dt = 50 Amp/s) (IF = 0.5 Amp, IR = 1.0 Amp, IREC = 0.25 A) Maximum Forward Recovery Time (IF = 1.0 A, di/dt = 100 A/s, IREC to 1.0 V) Controlled Avalanche Energy (See Test Circuit in Figure 6) 2. Pulse Test: Pulse Width = 300 s, Duty Cycle 2.0%. 10 10 vF 1.75 2.20 iR 600 10 trr 100 75 tfr WAVAL 75 10 ns mJ ns A Volts
I F , INSTANTANEOUS FORWARD CURRENT (AMPS)
VF @ 175C 1.0
I , INSTANTANEOUS FORWARD CURRENT (AMPS) F
1.0
VF @ 150C
150C 100C 25C 0.1 0.5 0.7 0.9 1.1 1.3 1.5 1.7 1.9 0.1 0.5 0.7 0.9 25C 1.1
125C 75C
1.3
1.5
1.7
1.9
2.1
2.3
VF, INSTANTANEOUS VOLTAGE (VOLTS)
VF, INSTANTANEOUS VOLTAGE (VOLTS)
Figure 1. Maximum Forward Voltage
Figure 2. Typical Forward Voltage
http://onsemi.com
2
MUR2100E
1000 IR @ 175C 100 150C 100C 25C 1000 IR, REVERSE CURRENT (m A) 100 10 1.0 0.1 0.01 0.1 0.001 25C IR @ 150C 125C 75C
IR, REVERSE CURRENT (m A)
10
1.0
0
200
400
600
800
1000
0
200
400
600
800
1000
VR, REVERSE VOLTAGE (VOLTS)
VR, REVERSE VOLTAGE (VOLTS)
Figure 3. Maximum Reverse Current
Figure 4. Typical Reverse Current
PF(AV) , AVERAGE POWER DISSIPATION (WATTS)
IF(AV) , AVERAGE FORWARD CURRENT (AMPS)
4.0
4.0 3.5 3.0 2.5 2.0 1.5 1.0 0.5 0 0 0.5 1.0
SQUARE WAVE dc
3.0
2.0 dc SQUARE WAVE 0 0 50 100 150 200
1.0
1.5
2.0
2.5
TA, AMBIENT TEMPERATURE (C)
IF(AV), AVERAGE FORWARD CURRENT (AMPS)
Figure 5. Current Derating
Figure 6. Power Dissipation
20 TJ = 25C C, CAPACITANCE (pF) 10 7.0 5.0
3.0 2.0 0 10 20 30 40 50
VR, REVERSE VOLTAGE (VOLTS)
Figure 7. Typical Capacitance
http://onsemi.com
3
MUR2100E
NOTE 3. -- AMBIENT MOUNTING DATA
Data shown for thermal resistance junction to ambient (RJA) for the mountings shown is to be used as typical guideline values for preliminary engineering or in case the tie point temperature cannot be measured.
TYPICAL VALUES FOR RJA IN STILL AIR Mounting Method 1 2 RJA 3 Lead Length, L 1/4 1/2 1/8 52 65 72 67 80 87 50 Units C/W C/W C/W
MOUNTING METHOD 1
L
L
EEEEEEEEEEEE EEEEEEEEEEEE
Vector Pin Mounting MOUNTING METHOD 3
EEEEEEEEEEE
MOUNTING METHOD 2
L L
EE EE EE EE EE EE EE
L = 3/8
Board Ground Plane
P.C. Board with 1-1/2 X 1-1/2 Copper Surface
http://onsemi.com
4
MUR2100E
PACKAGE DIMENSIONS
MINI MOSORB CASE 59-04 ISSUE M
B
K
D
NOTES: 1. ALL RULES AND NOTES ASSOCIATED WITH JEDEC DO-41 OUTLINE SHALL APPLY. 2. POLARITY DENOTED BY CATHODE BAND. 3. LEAD DIAMETER NOT CONTROLLED WITHIN F DIMENSION. DIM A B D K MILLIMETERS MIN MAX 5.97 6.60 2.79 3.05 0.76 0.86 27.94 --INCHES MIN MAX 0.235 0.260 0.110 0.120 0.030 0.034 1.100 ---
A
K
http://onsemi.com
5
MUR2100E
Notes
http://onsemi.com
6
MUR2100E
Notes
http://onsemi.com
7
MUR2100E
SWITCHMODE is a trademark of Semiconductor Components Industries, LLC.
ON Semiconductor and are trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC reserves the right to make changes without further notice to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. "Typical" parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including "Typicals" must be validated for each customer application by customer's technical experts. SCILLC does not convey any license under its patent rights nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal Opportunity/Affirmative Action Employer.
PUBLICATION ORDERING INFORMATION
NORTH AMERICA Literature Fulfillment: Literature Distribution Center for ON Semiconductor P.O. Box 5163, Denver, Colorado 80217 USA Phone: 303-675-2175 or 800-344-3860 Toll Free USA/Canada Fax: 303-675-2176 or 800-344-3867 Toll Free USA/Canada Email: ONlit@hibbertco.com Fax Response Line: 303-675-2167 or 800-344-3810 Toll Free USA/Canada N. American Technical Support: 800-282-9855 Toll Free USA/Canada EUROPE: LDC for ON Semiconductor - European Support German Phone: (+1) 303-308-7140 (Mon-Fri 2:30pm to 7:00pm CET) Email: ONlit-german@hibbertco.com French Phone: (+1) 303-308-7141 (Mon-Fri 2:00pm to 7:00pm CET) Email: ONlit-french@hibbertco.com English Phone: (+1) 303-308-7142 (Mon-Fri 12:00pm to 5:00pm GMT) Email: ONlit@hibbertco.com EUROPEAN TOLL-FREE ACCESS*: 00-800-4422-3781 *Available from Germany, France, Italy, UK, Ireland CENTRAL/SOUTH AMERICA: Spanish Phone: 303-308-7143 (Mon-Fri 8:00am to 5:00pm MST) Email: ONlit-spanish@hibbertco.com Toll-Free from Mexico: Dial 01-800-288-2872 for Access - then Dial 866-297-9322 ASIA/PACIFIC: LDC for ON Semiconductor - Asia Support Phone: 303-675-2121 (Tue-Fri 9:00am to 1:00pm, Hong Kong Time) Toll Free from Hong Kong & Singapore: 001-800-4422-3781 Email: ONlit-asia@hibbertco.com JAPAN: ON Semiconductor, Japan Customer Focus Center 4-32-1 Nishi-Gotanda, Shinagawa-ku, Tokyo, Japan 141-0031 Phone: 81-3-5740-2700 Email: r14525@onsemi.com ON Semiconductor Website: http://onsemi.com For additional information, please contact your local Sales Representative.
http://onsemi.com
8
MUR2100E/D

▲Up To Search▲

Price & Availability of MUR2100ED

	To Download MUR2100ED Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .