|
If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
Datasheet File OCR Text: |
MUR1510, MUR1515, MUR1520, MUR1540, MUR1560 Preferred Devices SWITCHMODETM Power Rectifiers . . . designed for use in switching power supplies, inverters and as free wheeling diodes, these state-of-the-art devices have the following features: http://onsemi.com * * * * * * * Ultrafast 35 and 60 Nanosecond Recovery Time 175C Operating Junction Temperature Popular TO-220 Package High Voltage Capability to 600 Volts Low Forward Drop Low Leakage Specified @ 150C Case Temperature Current Derating Specified @ Both Case and Ambient Temperatures ULTRAFAST RECTIFIERS 15 AMPERES 100-600 VOLTS 1 4 3 Mechanical Characteristics: * Case: Epoxy, Molded * Weight: 1.9 grams (approximately) * Finish: All External Surfaces Corrosion Resistant and Terminal * Lead Temperature for Soldering Purposes: 260C Max. for * * 10 Seconds Shipped 50 units per plastic tube Marking: U1510, U1515, U1520, U1540, U1560 U15xx Leads are Readily Solderable 4 MARKING DIAGRAM MAXIMUM RATINGS Please See the Table on the Following Page 1 3 TO-220AC CASE 221B PLASTIC U15xx = Device Code xx = 10, 15, 20, = 40 or 60 ORDERING INFORMATION Device MUR1510 MUR1515 MUR1520 MUR1540 MUR1560 Package TO-220 TO-220 TO-220 TO-220 TO-220 Shipping 50 Units/Rail 50 Units/Rail 50 Units/Rail 50 Units/Rail 50 Units/Rail Preferred devices are recommended choices for future use and best overall value. (c) Semiconductor Components Industries, LLC, 2000 1 October, 2000 - Rev. 2 Publication Order Number: MUR1520/D MUR1510, MUR1515, MUR1520, MUR1540, MUR1560 MAXIMUM RATINGS MUR Rating Peak Repetitive Reverse Voltage Working Peak Reverse Voltage DC Blocking Voltage Average Rectified Forward Current (Rated VR) Peak Rectified Forward Current (Rated VR, Square Wave, 20 kHz) Nonrepetitive Peak Surge Current (Surge applied at rated load conditions halfwave, single phase, 60 Hz) Operating Junction Temperature and Storage Temperature Range Symbol VRRM VRWM VR IF(AV) IFRM IFSM TJ, Tstg 1510 100 1515 150 1520 200 1540 400 1560 600 Unit Volts 15 @ TC = 150C 30 @ TC = 150C 200 -65 to +175 15 @ TC = 145C 30 @ TC = 145C 150 Amps Amps Amps C THERMAL CHARACTERISTICS Maximum Thermal Resistance, Junction to Case RJC 1.5 C/W ELECTRICAL CHARACTERISTICS Maximum Instantaneous Forward Voltage (Note 1.) (iF = 15 Amps, TC = 150C) (iF = 15 Amps, TC = 25C) Maximum Instantaneous Reverse Current (Note 1.) (Rated dc Voltage, TC = 150C) (Rated dc Voltage, TC = 25C) Maximum Reverse Recovery Time (IF = 1.0 Amp, di/dt = 50 Amps/s) 1. Pulse Test: Pulse Width = 300 s, Duty Cycle 2.0%. vF 0.85 1.05 iR 500 10 trr 35 500 10 60 1000 10 ns 1.12 1.25 1.20 1.50 A Volts http://onsemi.com 2 MUR1510, MUR1515, MUR1520, MUR1540, MUR1560 MUR1510, MUR1515, MUR1520 100 IR, REVERSE CURRENT (m A) 70 50 30 20 i F , INSTANTANEOUS FORWARD CURRENT (AMPS) TJ = 150C 100C 25C 100 50 20 10 5 2 1 0.5 0.2 0.1 0.05 0.02 0.01 0 20 40 60 80 100 120 140 160 180 200 25C TJ = 150C 100C 10 7.0 5.0 3.0 2.0 IF(AV) , AVERAGE FORWARD CURRENT (AMPS) VR, REVERSE VOLTAGE (VOLTS) Figure 2. Typical Reverse Current 16 14 12 10 8.0 6.0 4.0 2.0 0 140 150 160 170 180 Rated Voltage Applied dc 1.0 0.7 0.5 0.3 0.2 Square Wave 0.1 0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6 vF, INSTANTANEOUS VOLTAGE (VOLTS) TC, CASE TEMPERATURE (C) Figure 1. Typical Forward Voltage Figure 3. Current Derating, Case IF(AV) , AVERAGE FORWARD CURRENT (AMPS) PF(AV) , AVERAGE POWER DISSIPATION (WATTS) 14 12 10 8.0 6.0 4.0 dc Square Wave RqJA = 60C/W 2.0 As Obtained in Free Air, No Heat Sink 0 0 20 80 100 120 40 60 Square Wave dc RqJA = 16C/W As Obtained From A Small TO-220 Heat Sink 16 14 12 10 8.0 6.0 4.0 2.0 0 0 2.0 4.0 6.0 20 I (Resistive Load) PK = IAV I (Capacitive Load) PK =5.0 IAV 10 Square Wave TJ = 125C dc 140 160 180 200 8.0 10 12 14 16 TA, AMBIENT TEMPERATURE (C) IF(AV), AVERAGE FORWARD CURRENT (AMPS) Figure 4. Current Derating, Ambient Figure 5. Power Dissipation http://onsemi.com 3 MUR1510, MUR1515, MUR1520, MUR1540, MUR1560 MUR1540 100 IR, REVERSE CURRENT (m A) 70 50 30 20 i F , INSTANTANEOUS FORWARD CURRENT (AMPS) TJ = 150C 100C 25C 100 50 20 10 5 2 1 0.5 0.2 0.1 0.05 0.02 0.01 TJ = 150C 100C 25C 10 7.0 5.0 3.0 2.0 IF(AV) , AVERAGE FORWARD CURRENT (AMPS) 0 50 100 150 200 250 300 350 400 450 500 VR, REVERSE VOLTAGE (VOLTS) Figure 7. Typical Reverse Current 16 14 12 10 8.0 6.0 4.0 2.0 0 140 150 160 170 180 Rated Voltage Applied dc 1.0 0.7 0.5 0.3 0.2 Square Wave 0.1 0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6 vF, INSTANTANEOUS VOLTAGE (VOLTS) TC, CASE TEMPERATURE (C) Figure 6. Typical Forward Voltage Figure 8. Current Derating, Case PF(AV) , AVERAGE POWER DISSIPATION (WATTS) IF(AV) , AVERAGE FORWARD CURRENT (AMPS) 14 12 10 8.0 Square Wave 6.0 4.0 2.0 0 0 dc Square Wave RqJA = 60C/W As Obtained in Free Air, No Heat Sink 20 40 60 80 100 120 140 160 180 200 dc RqJA = 16C/W As Obtained From A Small TO-220 Heat Sink 16 14 12 10 8.0 6.0 4.0 2.0 0 0 2.0 4.0 6.0 (Resistive Load) I (Capacitive Load) PK =5.0 IAV 10 20 IPK = IAV dc Square Wave TJ = 125C 8.0 10 12 14 16 TA, AMBIENT TEMPERATURE (C) IF(AV), AVERAGE FORWARD CURRENT (AMPS) Figure 9. Current Derating, Ambient Figure 10. Power Dissipation http://onsemi.com 4 MUR1510, MUR1515, MUR1520, MUR1540, MUR1560 MUR1560 100 IR, REVERSE CURRENT (m A) 70 50 TJ = 150C 30 20 i F , INSTANTANEOUS FORWARD CURRENT (AMPS) 100C 25C 10 7.0 5.0 3.0 2.0 IF(AV) , AVERAGE FORWARD CURRENT (AMPS) 16 14 12 10 8.0 6.0 4.0 2.0 0 140 150 160 170 180 Rated Voltage Applied Square Wave dc 200 100 50 20 10 5 2 1 0.5 0.2 0.1 0.05 0.02 150 200 250 300 350 400 450 500 550 600 650 TJ = 150C 100C 25C VR, REVERSE VOLTAGE (VOLTS) Figure 12. Typical Reverse Current 1.0 0.7 0.5 0.3 0.2 0.1 0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6 vF, INSTANTANEOUS VOLTAGE (VOLTS) TC, CASE TEMPERATURE (C) Figure 11. Typical Forward Voltage Figure 13. Current Derating, Case PF(AV) , AVERAGE POWER DISSIPATION (WATTS) IF(AV) , AVERAGE FORWARD CURRENT (AMPS) 10 9.0 8.0 7.0 6.0 5.0 4.0 3.0 2.0 Square Wave dc RqJA = 16C/W As Obtained From A Small TO-220 Heat Sink 16 14 12 10 8.0 6.0 4.0 2.0 0 0 2.0 I (Capacitive Load) PK =5.0 IAV 10 20 Square Wave dc dc I (Resistive-Inductive Load) PK = IAV TJ = 125C Square Wave RqJA = 60C/W 1.0 As Obtained in Free Air, No Heat Sink 0 0 20 40 60 80 100 120 140 160 180 200 4.0 6.0 8.0 10 12 14 16 TA, AMBIENT TEMPERATURE (C) IF(AV), AVERAGE FORWARD CURRENT (AMPS) Figure 14. Current Derating, Ambient Figure 15. Power Dissipation http://onsemi.com 5 MUR1510, MUR1515, MUR1520, MUR1540, MUR1560 r(t), TRANSIENT THERMAL RESISTANCE (NORMALIZED) 1.0 0.5 0.2 0.1 0.05 0.02 0.01 0.01 0.02 SINGLE PULSE D = 0.5 0.1 0.05 0.01 ZJC(t) = r(t) RJC RJC = 1.5C/W MAX D CURVES APPLY FOR POWER PULSE TRAIN SHOWN READ TIME AT T1 TJ(pk) - TC = P(pk) ZJC(t) 50 100 200 500 1000 P(pk) t1 t2 DUTY CYCLE, D = t1/t2 0.05 0.1 0.2 0.5 1.0 2.0 t, TIME (ms) 5.0 10 20 Figure 16. Thermal Response 1000 500 C, CAPACITANCE (pF) 200 100 50 20 10 1.0 2.0 5.0 20 10 VR, REVERSE VOLTAGE (VOLTS) 50 100 TJ = 25C Figure 17. Typical Capacitance http://onsemi.com 6 MUR1510, MUR1515, MUR1520, MUR1540, MUR1560 PACKAGE DIMENSIONS TO-220 TWO-LEAD CASE 221B-04 ISSUE D NOTES: 1. DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 1982. 2. CONTROLLING DIMENSION: INCH. DIM A B C D F G H J K L Q R S T U INCHES MIN MAX 0.595 0.620 0.380 0.405 0.160 0.190 0.025 0.035 0.142 0.147 0.190 0.210 0.110 0.130 0.018 0.025 0.500 0.562 0.045 0.060 0.100 0.120 0.080 0.110 0.045 0.055 0.235 0.255 0.000 0.050 MILLIMETERS MIN MAX 15.11 15.75 9.65 10.29 4.06 4.82 0.64 0.89 3.61 3.73 4.83 5.33 2.79 3.30 0.46 0.64 12.70 14.27 1.14 1.52 2.54 3.04 2.04 2.79 1.14 1.39 5.97 6.48 0.000 1.27 C Q B F T S 4 A 1 3 U H K L G D J R http://onsemi.com 7 MUR1510, MUR1515, MUR1520, MUR1540, MUR1560 SWITCHMODE is a trademark of Semiconductor Components Industries, LLC. ON Semiconductor and are trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC reserves the right to make changes without further notice to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. "Typical" parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including "Typicals" must be validated for each customer application by customer's technical experts. SCILLC does not convey any license under its patent rights nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal Opportunity/Affirmative Action Employer. PUBLICATION ORDERING INFORMATION NORTH AMERICA Literature Fulfillment: Literature Distribution Center for ON Semiconductor P.O. Box 5163, Denver, Colorado 80217 USA Phone: 303-675-2175 or 800-344-3860 Toll Free USA/Canada Fax: 303-675-2176 or 800-344-3867 Toll Free USA/Canada Email: ONlit@hibbertco.com Fax Response Line: 303-675-2167 or 800-344-3810 Toll Free USA/Canada N. American Technical Support: 800-282-9855 Toll Free USA/Canada EUROPE: LDC for ON Semiconductor - European Support German Phone: (+1) 303-308-7140 (Mon-Fri 2:30pm to 7:00pm CET) Email: ONlit-german@hibbertco.com French Phone: (+1) 303-308-7141 (Mon-Fri 2:00pm to 7:00pm CET) Email: ONlit-french@hibbertco.com English Phone: (+1) 303-308-7142 (Mon-Fri 12:00pm to 5:00pm GMT) Email: ONlit@hibbertco.com EUROPEAN TOLL-FREE ACCESS*: 00-800-4422-3781 *Available from Germany, France, Italy, UK, Ireland CENTRAL/SOUTH AMERICA: Spanish Phone: 303-308-7143 (Mon-Fri 8:00am to 5:00pm MST) Email: ONlit-spanish@hibbertco.com Toll-Free from Mexico: Dial 01-800-288-2872 for Access - then Dial 866-297-9322 ASIA/PACIFIC: LDC for ON Semiconductor - Asia Support Phone: 303-675-2121 (Tue-Fri 9:00am to 1:00pm, Hong Kong Time) Toll Free from Hong Kong & Singapore: 001-800-4422-3781 Email: ONlit-asia@hibbertco.com JAPAN: ON Semiconductor, Japan Customer Focus Center 4-32-1 Nishi-Gotanda, Shinagawa-ku, Tokyo, Japan 141-0031 Phone: 81-3-5740-2700 Email: r14525@onsemi.com ON Semiconductor Website: http://onsemi.com For additional information, please contact your local Sales Representative. http://onsemi.com 8 MUR1520/D |
Price & Availability of MUR1510 |
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |