Part Number Hot Search : 
MN88413 0AA13 FUS58 M27C322 C550C 3ESK7M 8HC256DM 2SJ630
Product Description
Full Text Search
 

To Download OM9554SP Datasheet File

  If you can't view the Datasheet, Please click here to try to view without PDF Reader .  
 
 


  Datasheet File OCR Text:
 OM9551SP, OM9552SP, OM9553SP, OM9554SP
5V Input, 3A Output Current +3.3V, +2.5V +1.8V, +1.5V Output Switching Regulator Three Terminal Package
FEATURES * High Efficiency * Internal Short Circuit Protection * Small Footprint * High Power Density- 60W/in.3
APPLICATIONS * High Power 5V to 3.3V Regulation * Low Voltage Battery regulation * Embedded Processor Power * General Purpose Low Voltage Logic
Supply * FPGA Power
DESCRIPTION
The OM955X series of Switching Regulators are designed for pin compatibility with standard 3Pin linear regulators. They are well suited for on-board, non- isolated power applications where efficient point- of- load regulation is needed. The package is designed using Chip- on - Board technology to reduce cost and maintain power density. These units will typically not require any additional components in your application due to capacitance provided internal to the package.
MAXIMUM RATINGS @ Ta=25 C (unless otherwise specified)
Parameter
Input Voltage Output Current Power Dissipation Output Power Lead Temp. Value 8V 4A 1.8W 10W 230C
Conditions
Short Circuit Short Circuit Short Circuit < 1 min.
CONFIGURATION CHART
MODEL OM9551SP OM9552SP OM9553SP OM9554SP OUTPUT VOLTAGE 3.3V 2.5V 1.8V 1.5V TEMPERATURE RANGE -25 to +85C -25 to +85C -25 to +85C -25 to +85C MAX. OUTPUT CURRENT 3.0A 3.0A 3.0A 3.0A
Rev A 08/01/2000
1
205 Crawford Street * Leominster MA 01453 * Phone: 978 534 5776 * Fax: 978 537 4246 * www.omnirel.com
OM9551SP, OM9552SP, OM9553SP, OM9554SP
PERFORMANCE CHARACTERISTICS (Ta= 25C) INPUT Parameter Line Regulation Input Voltage Range Input Filtering1 OUTPUT Parameter Power Vout Accuracy Vout Regulation Output Ripple Current Limiting Efficiency Efficiency Efficiency Efficiency Min. Load Current Output Filter Capacitance1 DYNAMIC Parameter Transient Response Frequency Symbol Rline Vin Test Conditions 4.5V Vin 5.5V MIN -0.5 4.5 MAX +0.5 7.0 22 Units % V uF
Symbol Test Conditions Po Vo= 3.3V Vo= 3.3V, +2.5V, Vo +1.5V+1.8V Vreg V Ilim Il(min) Co Vin= 5V, 0.1 I3A Vin= 5V, Io= 3.0A Vin= 5V Vin=5V,Io=3A,Vo=+3.3V Vin=5V,Io=3A,Vo=+2.5V Vin=5V,Io=3A,Vo=+1.8V Vin=5V,Io=3A,Vo=+1.5V
MIN
TYP 0.8 0.3 80 4.0 88 87 86 85
MAX 10 1.0 0.1 100
Units W % % mV(p-p) A % % % % A uF
0.1 All Models 330
Test Conditions 50% load step Vout 0 to 85C
MIN
TYP 40 200
MAX 200 225
175
Units S mV KHz
ENVIRONMENTAL Parameter MODEL Operating OM9551SP, Temperature OM9552SP, OM9553SP, OM9554SP Storage Temp. Flammability
MIN -25
MAX 85
Units C
-40
125 UL94V0
C
1
Included in the package 2
205 Crawford Street * Leominster MA 01453 * Phone: 978 534 5776 * Fax: 978 537 4246 * www.omnirel.com
Rev A 08/01/2000
OM9551SP, OM9552SP, OM9553SP, OM9554SP
Typical Performance Characteristics (Ta= 25C)
Vo= +3.3V
Efficiency vs Output Current Vo= +3.3V 100.00 95.00 90.00 Efficiency (%) 85.00 80.00 75.00 70.00 65.00 60.00 0.00 0.50 1.00 1.50 Iout (A) 2.00 2.50 3.00 4.5V 5.0V 5.5V
2.00 1.80 1.60 1.40 1.20 PD (W) 1.00 0.80 0.60 0.40 0.20 0.00 0.00
Pow er Dissipation vs Output Current 4.5V 5.0V 5.5V
0.50
1.00
1.50 Iout (A)
2.00
2.50
3.00
Ripple vs Output Curr e nt 200.00 4.5V 180.00 5.0V 160.00 5.5V 140.00 120.00 100.00 80.00 60.00 40.00 20.00 0.00 0.00 0.50 1.00 1.50 2.00 2.50 3.00 Iout (A)
Rev A 08/01/2000
Ripple (mV)
3
205 Crawford Street * Leominster MA 01453 * Phone: 978 534 5776 * Fax: 978 537 4246 * www.omnirel.com
OM9551SP, OM9552SP, OM9553SP, OM9554SP
MECHANICAL OUTLINE
Package Pinout
Vout GND Vin
Rev A 08/01/2000
4
205 Crawford Street * Leominster MA 01453 * Phone: 978 534 5776 * Fax: 978 537 4246 * www.omnirel.com
OM9551SP, OM9552SP, OM9553SP, OM9554SP
APPLICATION CIRCUIT
Vin(+4.5- 5.5)
1 OM9551SP
3
Vout(+) (3.3V)
0.1uF
COM
(optional)
2
0.1uF
(optional)
COM
Internal to the package is a 22uF input capacitor and a 330uF output capacitor. The Omnirel process allows sufficient space allocation to include all components necessary to complete the basic regulation design. The additional by-pass capacitors are suggested if an improvement in switching noise becomes necessary.
Rev A 08/01/2000
5
205 Crawford Street * Leominster MA 01453 * Phone: 978 534 5776 * Fax: 978 537 4246 * www.omnirel.com


▲Up To Search▲   

 
Price & Availability of OM9554SP

All Rights Reserved © IC-ON-LINE 2003 - 2022  

[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy]
Mirror Sites :  [www.datasheet.hk]   [www.maxim4u.com]  [www.ic-on-line.cn] [www.ic-on-line.com] [www.ic-on-line.net] [www.alldatasheet.com.cn] [www.gdcy.com]  [www.gdcy.net]


 . . . . .
  We use cookies to deliver the best possible web experience and assist with our advertising efforts. By continuing to use this site, you consent to the use of cookies. For more information on cookies, please take a look at our Privacy Policy. X