![]() |
|
If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
Datasheet File OCR Text: |
BA5948FP Optical Discs 4-channel BTL driver for CD players BA5948FP BA5948FP is a 4-channel BTL driver for CD players. The adoption of HSOP28 package enables to make sets smaller. This IC incorporates thermal shutdown circuit and mute function with two mute pins. Gain can be controlled by external resistor in driver block. !Applications CD players !Features 1) 4-channel BTL driver 2) Set space saving by adoption of HSOP28 3) Built-in thermal shutdown circuit 4) Gain control by external resistor !External dimensions (Unit : mm) 18.5 0.2 28 15 9.9 0.3 7.5 0.2 1 5.15 0.1 14 2.2 0.1 0.11 0.8 0.35 0.1 0.08 M 16.0 0.2 0.1 S HSOP28 !Absolute maximum ratings (Ta=25C) Parameter Supply voltage Power dissipation Operating temperature range Storage temperature range Symbol Vcc, PVcc1, PVcc2 Limits 18 1700 -35 to +85 -55 to +150 Unit V mW C C Pd Topr Tstg Derating : 13.6mW/ C for operation above Ta=25 C. !Recommended Operating Conditions (Ta=25C) Parameter Supply voltage Symbol Vcc, PVcc1, PVcc2 Min. 4.5 Typ. 8 Max. 14 Unit V 0.5 0.2 0.25 0.1 1/2 BA5948FP Optical Discs !Electrical characteristics (Unless otherwise noted : Ta=25CVCC=8V, BIAS=2.5V, RL=8, Rin=10k) Parameter Current consumption at no signal CH1 output offset voltage Maximum output amplitude Close loop gain CH 2,3,4 output offset voltage Maximum output amplitude Close loop gain Mute OFF voltage Mute ON voltage Symbol ICC VOO1 VOM1 GVC1 VOO2 VOM2 GVC2 VMTOFF VMTON Min. - -50 5.1 12.5 -50 4.0 12.5 - 2.0 Typ. 7.5 - 5.6 15.0 - 4.6 15.0 - - Max. 15 50 6.1 17.5 50 5.1 17.5 0.5 - Unit mA mV V dB mV V dB V V Conditions No load !Application Circuit BIAS 10k FOCUS 10k 0.1F Vcc=8V 47F 28 27 26 25 24 23 22 21 20 19 FOCUS COIL TRACKING COIL TRACKING 18 CH4 17 16 15 CH3 N.C. Vcc 30k N.C. N.C. N.C. PVcc2 30k Level Shift Level Shift Level Shift SERVO PRE AMP T.S.D. 30k 15k BA5948FP 10k Level Shift 10k CH2 MUTE 1 10k 2 MUTE ON-HIGH OFF-LOW 3 CH1 MUTE 4 PVcc1 N.C. 5 N.C. 6 N.C. 7 N.C. 8 9 10k CH1 10k CH2 10 11 12 13 14 SPINDLE 10k MUTE ON-HIGH OFF-LOW M TRAVERSE MOTOR M SPINDLE MOTOR TRAVERSE 2/2 Appendix Notes No technical content pages of this document may be reproduced in any form or transmitted by any means without prior permission of ROHM CO.,LTD. The contents described herein are subject to change without notice. The specifications for the product described in this document are for reference only. Upon actual use, therefore, please request that specifications to be separately delivered. Application circuit diagrams and circuit constants contained herein are shown as examples of standard use and operation. Please pay careful attention to the peripheral conditions when designing circuits and deciding upon circuit constants in the set. Any data, including, but not limited to application circuit diagrams information, described herein are intended only as illustrations of such devices and not as the specifications for such devices. ROHM CO.,LTD. disclaims any warranty that any use of such devices shall be free from infringement of any third party's intellectual property rights or other proprietary rights, and further, assumes no liability of whatsoever nature in the event of any such infringement, or arising from or connected with or related to the use of such devices. Upon the sale of any such devices, other than for buyer's right to use such devices itself, resell or otherwise dispose of the same, no express or implied right or license to practice or commercially exploit any intellectual property rights or other proprietary rights owned or controlled by ROHM CO., LTD. is granted to any such buyer. Products listed in this document use silicon as a basic material. Products listed in this document are no antiradiation design. The products listed in this document are designed to be used with ordinary electronic equipment or devices (such as audio visual equipment, office-automation equipment, communications devices, electrical appliances and electronic toys). Should you intend to use these products with equipment or devices which require an extremely high level of reliability and the malfunction of with would directly endanger human life (such as medical instruments, transportation equipment, aerospace machinery, nuclear-reactor controllers, fuel controllers and other safety devices), please be sure to consult with our sales representative in advance. About Export Control Order in Japan Products described herein are the objects of controlled goods in Annex 1 (Item 16) of Export Trade Control Order in Japan. In case of export from Japan, please confirm if it applies to "objective" criteria or an "informed" (by MITI clause) on the basis of "catch all controls for Non-Proliferation of Weapons of Mass Destruction. Appendix1-Rev1.0 |
Price & Availability of BA5948FP
![]() |
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |