 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| HCC/HCF4049UB HCC/HCF4050B HEX BUFFER/CONVERTERS 4049UB 4050B .HI .HI .QUI .HI .5V,10VAND15VPARAMETRI .I .100%TESTEDFORQUI .MEETSALLREQUI INVERTING TYPE NON-INVERTING TYPE GH SINK CURRENT FOR DRIVING 2 TTL LOADS GH-TO-LOW LEVEL LOGIC CONVERSION ESCENT CURRENT SPECIFIED TO 20V FOR HCC DEVICE GH "SINK" AND "SOURCE" CURRENT CAPABILITY C RATINGS NPUT CURRENT OF 100 nA AT 18V AND 25C FOR HCC DEVICE ESCENT CURRENT REMENTS OF JEDEC TENTATIVE STANDARD No. 13A, "STANDARD SPECIFICATIONS FOR DESCRIPTION OF "B" SERIES CMOS DEVICES" EY (Plastic Package) F (Ceramic Frit Seal Package) M1 (Micro Package) C1 (Plastic Chip Carrier) ORDER CODES : HCC40XXBF HCF40XXBM1 HCF40XXBEY HCF40XXBC1 PIN CONNECTIONS 4049UB DESCRIPTION The HCC4049UB/4050B (extended temperature range) and the HCF4049UB/4050B (intermediate temperature range) are monolithic integrated circuits available in 16-lead dual in-line plastic or ceramic package and plastic micro package. The HCC/HCF4049UB/4050B are inverting and non-inverting hex buffers, respectively, and feature logic-level conversion using only one supply voltage (VDD). The input-signal high level (VIH) can exceed the VDD supply voltage when these devices are used for logic level conversions. These devices are intended for use as COS/MOS to DTL/TTL converters and can drive directly two DTL/TTL loads (VDD = 5V, VOL 0.4V, and IOL 3.2mA). June 1989 4050B 1/12 HCC/HCF4049UB/4050B SCHEMATIC DIAGRAMS (1 of 6 identical units) 4049UB 4050B ABSOLUTE MAXIMUM RATINGS Symbol V DD* Vi II Pt ot Parameter Supply Voltage : HC C Types H C F Types Input Voltage DC Input Current (any one input) Total Power Dissipation (per package) Dissipation per Output Transistor for T o p = Full Package-temperature Range Operating Temperature : HCC Types H CF Types Storage Temperature Value - 0.5 to + 20 - 0.5 to + 18 - 0.5 to V DD + 0.5 10 200 100 - 55 to + 125 - 40 to + 85 - 65 to + 150 Unit V V V mA mW mW C C C Top Tstg Stresses above those listed under "Absolute Maximum Ratings" may cause permanent damage to the device. This is a stress rating only and functional operation of the device at these or any other conditions above those indicated in the operational sections of this specification is not implied. Exposure to absolute maximum rating conditions for external periods may affect device reliability. * All voltage values are referred to VSS pin voltage. RECOMMENDED OPERATING CONDITIONS Symbol V DD VI Top Parameter Supply Voltage : HC C Types H C F Types Input Voltage Operating Temperature : H CC Types H C F Types Value 3 to 18 3 to 15 0 to V DD - 55 to + 125 - 40 to + 85 Unit V V V C C 2/12 HCC/HCF4049UB/4050B STATIC ELECTRICAL CHARACTERISTICS (over recommended operating conditions) Symbol IL Parameter Quiescent Supply Current Test Conditions VO V DD VI (V) (V) (V) 0/ 5 0/10 0/15 0/20 0/ 5 0/10 0/15 0/ 5 0/10 0/15 5/0 10/0 15/0 0.5 1 2 4.5 9 13.5 4.5 9 13 0.5 1 1.5 2.5 4.6 9.5 13.5 2.5 4.6 9.5 13.5 0.4 0.5 1.5 0.4 0.5 1.5 5 10 15 20 5 10 15 5 10 15 5 10 15 5 10 15 5 10 16 5 10 15 5 10 15 5 5 10 15 5 5 10 15 5 10 15 5 10 15 18 15 Any Input T Lo w* Min. Max. 1 2 4 20 4 8 16 4.95 9.95 14.95 0.05 0.05 0.05 4 8 12 3.5 7 11 1 2 3 1.5 3 4 1.6 0.64 1.6 4.7 1.5 0.61 1.5 4.5 3.75 10 30 3.6 9.6 28 0.1 0.3 Value 25 C Min. Typ. Max. 0.02 1 0.02 2 0.02 4 0.04 20 0.02 4 0.02 8 0.02 16 4.95 9.95 14.95 0.05 0.05 0.05 4 8 12 3.5 7 11 1 2 3 1.5 3 4 -1.25 - 6.4 -0.51 - 1.6 -1.30 - 3.6 -3.75 - 12 -1.25 - 6.4 -0.51 - 1.6 -1.25 - 3.6 -3.75 - 12 3.2 6.4 8 16 24 48 3.2 6.4 8 16 24 48 10-5 0.1 10-5 0.3 15 5 22.5 7.5 T High* Min. Max. 30 60 120 600 30 60 120 4.95 9.95 14.95 0.05 0.05 0.05 4 8 12 3.5 7 11 1 2 3 1.5 3 4 - 0.9 -0.36 - 0.9 - 2.7 -1 -0.42 -1 -3 2.2 5.6 17 2.6 6.6 19 1 1 pF Unit HCC Types A HCF Types VOH Output High Voltage Output Low Voltage Input High Voltage (4049UB) Input High Voltage (4050B) Input Low Voltage (4049UB) Input Low Voltage (4050B) Output Drive Current V VOL V VIH V VIH V VIL V VIL V IOH HCC Types HCF Types IOL Output Sink Current HCC Types HCF Types 0/ 5 0/ 5 0/10 0/15 0/ 5 0/ 5 0/10 0/15 0/ 5 0/10 0/15 0/ 5 0/10 0/15 0/18 0/15 mA mA IIH, IIL Input Leakage Current Input Capacitance HCC Types HCF Types 4049UB 4050B A CI (*) TLow = - 55C for HCC device : - 40C for HCF device. THigh = + 125C for HCC device : + 85C for HCF device. The Noise Margin (only HCC/HCF4050B type) for both "1" and "0" level is : 1V min. with VDD = 5V, 2V min. with VDD = 10V, 2.5V min. with VDD = 15V. 3/12 HCC/HCF4049UB/4050B DYNAMIC ELECTRICAL CHARACTERISTICS (T amb = 25C, C L = 50pF, R L = 200k, typical temperature coefficient for all V DD values is 0.3%/C, all input rise and fall times = 20ns) Symbol t PL H Parameter Propagation Delay Time (4049UB) Test Conditions V I (V) V D D (V) Min. 5 10 10 15 15 t PL H Propagation Delay Time (4050B) 5 10 10 15 15 t PHL Propagation delay Time (4049UB) 5 10 10 15 15 t PHL Propagation Delay Time (4050B) 5 10 10 15 15 tTLH Transition Time 5 10 15 t T HL Transition Time 5 10 15 5 10 5 15 5 5 10 5 15 5 5 10 5 15 5 5 10 5 15 5 5 10 15 5 10 15 Value Typ. 60 32 45 25 45 70 40 45 30 40 32 20 15 15 10 55 22 50 15 50 80 40 30 30 20 15 Max. 120 65 90 50 90 140 80 90 60 80 65 40 30 30 20 110 55 100 30 100 160 80 60 60 40 30 ns ns ns ns Unit 4/12 HCC/HCF4049UB/4050B Minimum and Maximum Voltage Transfer Characteristics for 4049UB. Minimum and Maximum Voltage Transfer Characteristics for 4050B. Typical Voltage Transfer Characteristics as a Function of Temperature for 4049UB. Typical Voltage Transfer Characteristics as a Function of Temperature for 4050B. Typical Output Low (sink) Current Characteristics. Minimum Output Low (sink) Current Characteristics. 5/12 HCC/HCF4049UB/4050B Typical Output High (source) Current Characteristics. Minimum Output High (source) Current Characteristics. Typical Power Dissipation per Buffer/Inverter vs. Frequency. Typical Power Dissipation vs. Input Transition Time per Inverter for 4049UB. Typical Power Dissipation vs. Input Transition Time per Inverter for 4050B. Logic-Level Conversion Application. 6/12 HCC/HCF4049UB/4050B TEST CIRCUITS Quiescent Device Current. Input Voltage. Input Current. 7/12 HCC/HCF4049UB/4050B Plastic DIP16 (0.25) MECHANICAL DATA mm MIN. a1 B b b1 D E e e3 F I L Z 3.3 1.27 8.5 2.54 17.78 7.1 5.1 0.130 0.050 0.51 0.77 0.5 0.25 20 0.335 0.100 0.700 0.280 0.201 1.65 TYP. MAX. MIN. 0.020 0.030 0.020 0.010 0.787 0.065 inch TYP. MAX. DIM. P001C 8/12 HCC/HCF4049UB/4050B Ceramic DIP16/1 MECHANICAL DATA mm MIN. A B D E e3 F G H L M N P Q 7.8 2.29 0.4 1.17 0.22 0.51 0.38 17.78 2.79 0.55 1.52 0.31 1.27 10.3 8.05 5.08 0.307 0.090 0.016 0.046 0.009 0.020 3.3 0.015 0.700 0.110 0.022 0.060 0.012 0.050 0.406 0.317 0.200 TYP. MAX. 20 7 0.130 MIN. inch TYP. MAX. 0.787 0.276 DIM. P053D 9/12 HCC/HCF4049UB/4050B SO16 (Narrow) MECHANICAL DATA DIM. MIN. A a1 a2 b b1 C c1 D E e e3 F G L M S 3.8 4.6 0.5 9.8 5.8 1.27 8.89 4.0 5.3 1.27 0.62 8 (max.) 0.149 0.181 0.019 10 6.2 0.35 0.19 0.5 45 (typ.) 0.385 0.228 0.050 0.350 0.157 0.208 0.050 0.024 0.393 0.244 0.1 mm TYP. MAX. 1.75 0.2 1.65 0.46 0.25 0.013 0.007 0.019 0.004 MIN. inch TYP. MAX. 0.068 0.007 0.064 0.018 0.010 P013H 10/12 HCC/HCF4049UB/4050B PLCC20 MECHANICAL DATA mm MIN. A B D d1 d2 E e e3 F G M M1 1.27 1.14 7.37 1.27 5.08 0.38 0.101 0.050 0.045 9.78 8.89 4.2 2.54 0.56 8.38 0.290 0.050 0.200 0.015 0.004 TYP. MAX. 10.03 9.04 4.57 MIN. 0.385 0.350 0.165 0.100 0.022 0.330 inch TYP. MAX. 0.395 0.356 0.180 DIM. P027A 11/12 HCC/HCF4049UB/4050B Information furnished is believed to be accurate and reliable. However, SGS-THOMSON Microelectronics assumes no responsability for the consequences of use of such information nor for any infringement of patents or other rights of third parties which may results from its use. No license is granted by implication or otherwise under any patent or patent rights of SGS-THOMSON Microelectronics. Specifications mentioned in this publication are subject to change without notice. This publication supersedes and replaces all information previously supplied. SGS-THOMSON Microelectronics products are not authorized for use ascritical components in life support devices or systems without express written approval of SGS-THOMSON Microelectonics. (c) 1994 SGS-THOMSON Microelectronics - All Rights Reserved SGS-THOMSON Microelectronics GROUP OF COMPANIES Australia - Brazil - France - Germany - Hong Kong - Italy - Japan - Korea - Malaysia - Malta - Morocco - The Netherlands Singapore - Spain - Sweden - Switzerland - Taiwan - Thailand - United Kingdom - U.S.A 12/12 |
Price & Availability of HCF4050B
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |