![]() |
|
If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
Datasheet File OCR Text: |
E-Series RF 1:4 Transformer -- 500 - 2500 MHz ETC1.6-4-2-3 ETC1.6-4-2-3 E-Series RF 1:4 Transmission Line Step-up Transformer 500 - 2500 MHz Features * * * * Surface Mount 1:4 Impedance Ratio CT on Secondary Available on Tape & Reel SM-22 Package 0.030 0.050 (1.27) (0.762) 0.150 (3.81) 0.030 (0.762) 0.150 MAX (3.81 MAX) 0.150 (3.81) 0.030 (0.762) 0.065 (1.65) 0.055 (1.397) 0.190 (4.83) Description M/A-COM's ETC1.6-4-2-3 is a 1:4 RF transmission line step-up transformer in a low cost, surface mount package. Ideally suited for high volume cellular and wireless applications. Typical applications include single to balanced mode conversion and impedance matching. 0.100 (2.54) 0.130 (3.30) 0.030 (0.762) Schematic Primary Dot 5 1 Secondary Dot 2 Secondary CT Primary 4 3 Secondary Electrical Specifications @25C Parameter Frequency Range 500 - 2500 Insertion Loss (fL - fU) 500 - 750 MHz 750 - 1200 MHz 1200 - 2500 MHz Units MHz dB dB dB Nominal -- -- -- -- Maximum -- 3.0 1.0 3.0 Mean (x) -- -- 0.22 -- Sigma () -- -- 0.159 -- Note: Mean and Sigma calculated from average loss at @ (fU - fL)/2 + fL Please Note that the photograph above indicates package only, not actual unit. V2.00 S 0206 G M/A-COM Division of AMP Incorporated s North America: Tel. (800) 366-2266, Fax (800) 618-8883 s Asia/Pacific: Tel.+85 2 2111 8088, Fax +85 2 2111 8087 s Europe: Tel. +44 (1344) 869 595, Fax+44 (1344) 300 020 www.macom.com AMP and Connecting at a Higher Level are trademarks. Specifications subject to change without notice. E-Series RF 1:4 Transformer -- 500 - 2500 MHz ETC1.6-4-2-3 Absolute Maximum Ratings Parameter RF Power DC Current Operating Temperature Storage Temperature Absolute Maximum 250 mW 30 mA -30C to +85C -30C to +85C Functional Configuration Function Secondary Secondary CT Secondary Dot Primary Dot Primary Pin No. 3 2 1 5 4 Typical Performance Over Extended Bandwidth (30kHz - 3.0GHz) Insertion Loss Phase Unbalance Amplitude Unbalance Input Impedance Note: All measurements performed on Hewlett Packard 8753D Network Analyzer (201 sample points, linear scale) in a 50 ohm coplanar waveguide environment. Tables created using MDS software. V2.00 S 0206 G M/A-COM Division of AMP Incorporated s North America: Tel. (800) 366-2266, Fax (800) 618-8883 s Asia/Pacific: Tel.+85 2 2111 8088, Fax +85 2 2111 8087 s Europe: Tel. +44 (1344) 869 595, Fax+44 (1344) 300 020 www.macom.com AMP and Connecting at a Higher Level are trademarks. Specifications subject to change without notice. |
Price & Availability of ETC16-4-2-3
![]() |
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |