PART |
Description |
Maker |
DS1812R-15-U DS1812R-5-U |
5V EconoReset with Active High Push-Pull Output
|
MAXIM - Dallas Semiconductor
|
RP5-19J-14SC02 RP5-19R-14SC01 RP5-19RB-14SR01 RP5- |
KUPPLUNG VIDEO PUSH PULL 14POL BUCHSE FLANSCH VIDEO PUSH PULL 14POL BUCHSE VIDEO PCB PUSH PULL 14POL STECKER VIDEO PUSH PULL 14POL STECKER视频推拉14POL
|
HIROSE ELECTRIC Co., Ltd.
|
L293DD013TR L293D L293DD L293D03 L293B-03 L293D-03 |
PUSH-PULL FOUR CHANNEL DRIVER WITH DIODES PUSH-PULL FOUR CHANNEL DRIVERS
|
STMICROELECTRONICS[STMicroelectronics] ST Microelectronics
|
DS3687H DS3687J-8/A DS3687N-8/B DS3687H/A DS3687N- |
Dual Peripheral Driver µP Supervisory, Push/Pull Active-Low, TH: 1.8V, Timeout: 100ms, SOT23 3-pin µP Supervisory, Push/Pull Active-Low, TH: 1.6V, Timeout: 100ms, SOT23 3-pin µP Supervisory, Push/Pull Active-Low, TH: 2.3V, Timeout: 20ms, SOT23 3-pin µP Supervisory, Push/Pull Active-Low, TH: 2.0V, Timeout: 100ms, SOT23 3-pin µP Supervisory, Push/Pull Active-Low, TH: 1.8V, Timeout: 100ms, SOT23 3-pin 双外围驱动器
|
KEMET Corporation
|
MCP6542 MCP6542-I/MS MCP6542-I/P MCP6542-I/SN MCP6 |
The MCP6544 is a Push-pull, quad comparator. This single-ended device operates from 1.6V to 5.5V,with typical quiescent current of ... The MCP6541 is a Push-pull, single comparator. This single-ended device operates from 1.6V to 5.5V, with typical quiescent current ... Push-Pull Output Sub-Microamp Comparators The MCP6544 is a Push-pull, quad comparator. This single-ended device operates from 1.6V to 5.5V, with typical quiescent current of 600 nA and a maximum of 1 microamp. This device is offered in the 16 lead PDIP, SOIC and 14 lead TSSOP pack The MCP6543 is a Push-pull, single comparator. This single-ended device operates from 1.6V to 5.5V, with typical quiescent current of 600 nA and a maximum of 1 microamp. This device is offered in the eight lead PDIP, SOIC and MSOP package, The MCP6542 is a Push-pull, dual comparator. This single-ended device operates from 1.6V to 5.5V, with typical quiescent current of 600 nA and a maximum of 1 microamp. This device is offered in the eight lead PDIP, SOIC and MSOP package. The MCP6541 is a Push-pull, single comparator. This single-ended device operates from 1.6V to 5.5V, with typical quiescent current of 600 nA and a maximum of 1 microamp. This device is offered in the eight lead PDIP, SOIC, MSOP and five le The MCP6543 is a Push-pull, single comparator. This single-ended device operates from 1.6V to 5.5V,with typical quiescent current ... The MCP6542 is a Push-pull, dual comparator. This single-ended device operates from 1.6V to 5.5V,with typical quiescent current of ... From old datasheet system IC,VOLT COMPARATOR,DUAL,CMOS,TSSOP,8PIN,PLASTIC
|
Microchip Technology Inc.
|
804-001-06 |
Push-Pull Mighty Mouse
|
Glenair, Inc.
|
L293B03 |
PUSH-PULL FOUR CHANNEL DRIVERS
|
STMicroelectronics
|
DRF1301 |
MOSFET Push-Pull Hybrid
|
Microsemi Corporation
|
MCH6536 MCH653608 |
Push-Pull Circuit Applications
|
Sanyo Semicon Device
|
MC7856 |
CATV 22 dB PUSH-PULL AMPLIFIER
|
NEC[NEC]
|
SGM8704 |
Push-Pull Output Comparator
|
Shengbang Microelectron...
|
|