| PART |
Description |
Maker |
| MICROFOX-SC |
Diagonal cutter for Cu wire up to 1.5 mm diameter
|
PHOENIX CONTACT
|
| PPS-90-STANDARD-M |
Profile cutter, for cutting and stamping holes in standard DIN rails
|
PHOENIX CONTACT
|
| PPS-CLASSIC-M |
Profile cutter, for cutting and stamping holes in standard DIN rails
|
PHOENIX CONTACT
|
| PPS-BOLT-SET-M12 |
Threaded pin M12 with nut, for the lever rod of the profile cutter PPS
|
PHOENIX CONTACT
|
| ICX432DQ |
Diagonal 6.67mm(Type 1/2.7) Frame Readout CCD
Diagonal 6.67mm (Type 1/2.7) Frame Readout CCD Image Sensor with a Square Pixel for Color Cameras
|
SONY[Sony Corporation]
|
| ASM5I9350G-32-LT ASM5I9350 ASM5I9350-32-ET ASM5I93 |
Mechanism, 2-inch, front feed, w/ manual knob, platen detect & cutter (full cut) 200 MHz, OTHER CLOCK GENERATOR, PQFP32
3.3V 1:10 LVCMOS PLL Clock Generator 200 MHz, OTHER CLOCK GENERATOR, PQFP32
Mechanism, 2-inch, front feed, w/ manual knob, platen detect & cutter (full cut)
Mechanism, high speed, ELM w/latch lever
|
Alliance Semiconductor, Corp.
Vishay Intertechnology, Inc.
ALSC[Alliance Semiconductor Corporation]
|
| ICX038BNA ICX038DNA |
Diagonal 8mm(Type 1/2)CCD Image Sensor for NTSC
Diagonal 8mm (Type 1/2) CCD Image Sensor for NTSC Color Video Cameras
From old datasheet system
|
SONY[Sony Corporation]
|
| ICX423AL ICX423 |
Diagonal 11mm(Type 2/3) CCD Image Sensor for
Diagonal 11mm (Type 2/3) CCD Image Sensor for CCIR B/W Video Cameras
|
Sony Corporation
|
| ICX413AQ |
Diagonal 28.40mm(Type 1.8) Frame Readout CCDImage Sensor with Square Pixel for Color Cameras 方形对角线二十八点四○毫米像素（180型）CCDImage传感器读出帧彩色摄像
Diagonal 28.40mm (Type 1.8) Frame Readout CCD Image Sensor with Square Pixel for Color Cameras
|
Opto 22
Sony Corporation
|
| ICX279AL ICX209AL |
Diagonal 4.5mm (Type 1/4) CCD Image Sensor for CCIR B/W Video Cameras
Diagonal 4.5mm (Type 1/4) CCD Image Sensor for
|
SONY[Sony Corporation]
|
| DV6318/2TDH4P |
DC diagonal fan
|
ebm-papst
|
| CY7C1350G-250BGI CY7C1350G CY7C1350G-100AXC CY7C13 |
4-Mbit (128K x 36) Pipelined SRAM with NoBL(TM) Architecture
Mechanism, 2-inch wide, compact, Easy Load and platen detect
Mechanism, 2-inch wide, Hi-speed, compact Easy Load
Parallel Mini Interface Board with cutter controller for 6x8MCL35x
Mechanism, ELM w/low profile cutter (full or partial cut)
Mechanism, 2-inch wide, Hi-speed, compact, rear feed and platen detect 128K X 36 ZBT SRAM, 2.6 ns, PQFP100
Mechanism, 2-inch wide, compact Easy Load, 3V logic 128K X 36 ZBT SRAM, 2.6 ns, PBGA119
4-Mbit (128K x 36) Pipelined SRAM with NoBL Architecture 128K X 36 ZBT SRAM, 4 ns, PBGA119
|
CYPRESS[Cypress Semiconductor]
Cypress Semiconductor Corp.
Cypress Semiconductor, Corp.
|
|
