| PART |
Description |
Maker |
| RIF-2-RPT-LDP-24DC |
Pre-assembled relay module with push-in connection, consisting of: relay base, power contact relay, and retaining bracket. Contact type: 4 PDTs. Input voltage: 24 V DC
|
PHOENIX CONTACT
|
| RIF-2-RSC-LDP-125DC |
Pre-assembled relay module with screw connection, consisting of: relay base, power contact relay, and retaining bracket. Contact type: 4 changeover contacts. Input voltage: 125 V DC
|
PHOENIX CONTACT
|
| RIF-0-OPT-24DC |
Pre-assembled solid-state relay module with push-in connection, consisting of: relay base with ejector and plug-in miniature solid-state relay. Input voltage: 24 V DC. Output: 3 - 33 V DC/3 A
|
PHOENIX CONTACT
|
| SSTC1.5 SSTC500 SSTC3 SSTC2.5 SSTC4 SSTC3.5 SSTC37 |
2410 size SMD fuses, pre-assembled in SMD clips
|
Bel Fuse Inc.
|
| SPS-448-6-E SPS-448-3-E SPS-448-2-E |
Receiver Pre-amp Module for Infrared Remote Control(用于红外远程控制的载波频6.8 kHz的接收前置放大器模块)
Receiver Pre-amp Module for Infrared Remote Control(用于红外远程控制的载波频3.3 kHz的接收前置放大器模块)
Receiver Pre-amp Module for Infrared Remote Control(用于红外远程控制的载波频6.7 kHz的接收前置放大器模块)
Receiver Pre-amp Module for Infrared Remote Control(用于红外远程控制的载波频33.3 kHz的接收前置放大器模块) 接收机前置放大器的红外遥控器（用于红外远程控制的载波频率33.3千赫模块的接收前置放大器模块
|
Sanyo Electric Co.,Ltd.
Sanyo Electric Co., Ltd.
|
| SPS-447-E SPS-447-2-E |
Receiver Pre-amp Module for Infrared Remote Control(用于红外远程控制的载波频率为40 kHz的接收前置放大器模块)
Receiver Pre-amp Module for Infrared Remote Control(用于红外远程控制的载波频6.7 kHz的接收前置放大器模块) 接收机前置放大器的红外遥控器（用于红外远程控制的载波频率6.7千赫模块的接收前置放大器模块
|
Sanyo Electric Co.,Ltd.
Sanyo Electric Co., Ltd.
|
| W25Q80BVSSIG W25Q80BVSNIG W25Q80BVUXIG W25Q80BVZPI |
8M-BIT SERIAL FLASH MEMORY WIT DUAL AND QUAD SPI
|
Winbond
|
| IR6038 |
Receiver Pre-amp Module
|
ETC
|
| SPS-440 SPS-440-1 |
Receiver Pre-Amp Module
|
Sanyo
|
| P423 P421W |
PASSIVATED ASSEMBLED CIRCUIT ELEMENTS
|
International Rectifier
|
| PR100 PR1000 |
Passivated Assembled Circuit Elements
|
International Rectifier
|
