| PART |
Description |
Maker |
| C62122-A132-B94 B84114-D-A10 B84114-D-A110 B84114- |
SIFI-D for high insertion loss Rated voltage 250 V~, 50/60 Hz Rated current 1 A to 10 A
|
EPCOS[EPCOS]
|
| B84142-A60-R B84142-A10-R B84142-A20-R B84142-A30- |
Power line filters for single-phase systems Rated voltage 250 V~, 50/60 Hz Rated current 10 to 60 A
|
EPCOS[EPCOS]
|
| B84142-B8-R B84142-B12-R B84142-B16-R |
Power line filters for single-phase systems Rated voltage 250 V~, 50/60 Hz Rated current 8 A to 25 A
|
EPCOS[EPCOS]
|
| CB-25AP |
Small size magnetic type sound generator. Rated voltage 5 VDC. Rated current: average 80 mA peak 180 mA. Outer dimensions: diameter 25 mm, height 12.5 mm.
|
Citizen Electronics
|
| B84110A B84110A0000A005 B84110A0000A010 B84110A000 |
EMC filters
Power line filters for 1-phase systems Rated voltage 250 V DC/AC, 50/60 Hz Rated current 0.5 to 6 A
|
EPCOS[EPCOS]
|
| RE023 |
RE023 [Updated 2/03. 9 Pages] The RE023 is a Low Drop Out (LDO) voltage regulator macrocell with a fixed 2.6V output voltage. rated for loads of up
Embedded ASIC Macrocell: Power Management for Mobile Terminals (PM), RE023 Fixed 2.6V 160 mA LDO Voltage Regulator
A Low Drop Out (LDO) voltage regulator macrocell with a fixed 2.6V output voltage, rated for loads of up to 160 mA. A typical application is radio section supply in mobile terminals.
|
ATMEL[ATMEL Corporation]
|
| RE031NBSP RE031 |
A dual mode Low Drop Out (LDO) voltage regulator macrocell with a fixed 2.5V output voltage, rated f
From old datasheet system
|
Atmel corp
|
| GRM0115C1E1R4BE01 GRM0115C1E2R4BE01 |
Rated voltage
|
Murata Manufacturing Co...
|
| B82412-A3100-M B82412-A1102- B82412-A1103- B82412- |
Size 1210 (EIA) or 3225 (IEC) Rated inductance 0,010 to 10 mH Rated current 90 to 700 mA
|
EPCOS[EPCOS]
|
| HC1203A |
Value applying Rated Voltage
|
JL World Company Limite...
|
