| PART |
Description |
Maker |
| CY25100 CY25100SCF CY25100SIF CY25100SXCF CY25100S |
Field- and Factory-Programmable Spread Spectrum Clock Generator for EMI Reduction 200 MHz, OTHER CLOCK GENERATOR, PDSO8
|
Cypress Semiconductor, Corp.
Cypress Semiconductor Corp.
CYPRESS[Cypress Semiconductor]
|
| CY3619 |
Very Low Jitter Field and Factory Programmable Clock Generator PROC SPECIFIC CLOCK GENERATOR, PDSO8
|
Cypress Semiconductor, Corp.
|
| MAX6665 MAX6665ASA40 MAX6665ASA45 MAX6665ASA50 MAX |
Fan Controller/Driver with Factory-Programmed Temperature Thresholds
Fan Controller/Driver with Factory- Programmed Temperature Thresholds SPECIALTY ANALOG CIRCUIT, PDSO8
|
MAXIM - Dallas Semiconductor
MAXIM[Maxim Integrated Products]
Maxim Integrated Products, Inc.
|
| TC6502 TC6504P005VCT TC6501 TC6501P115VCT TC6501P1 |
The TC6501 through TC6504 are SOT-23 temperature switches that require no external components and the design is facilitated with factory programmed temperature thresholds. A choice of factory-trimmed temperature trip points are available.
From old datasheet system
(TC6501 - TC6504) Ultra Small Temperature Switches with Pin Selectable Hysteresis
Ultra Small Temperature Switches with Pin Selectable Hysteresis 超小型温度开关，引脚可选择迟滞
|
MICROCHIP[Microchip Technology]
Microchip Technology, Inc.
|
| A1182 A1182LUA A1180 A1184 A1181 A1182ELH A1182EUA |
(A1180 - A1184) Unipolar Hall-Effect Switch
Two-Wire Programmable Chopper-Stabilized Unipolar Hall-Effect Switch
Two-Wire, Programmable, Chopper-Stabilized, Unipolar Hall-Effect Switch
Two-Wire, Factory-Programmed, Chopper-Stabilized, Unipolar Hall-Effect Switch
|
Allegro MicroSystems, Inc.
ALLEGRO[Allegro MicroSystems]
|
| 52500-LW-TTT 52500-SP-TTT |
HEATER, 18V, 9W, FACTORY SET TEMPERATURE
|
Micropac Industries
|
| 195F30 |
Enclosures can be Factory Modified ( Milling, Drilling, Printing etc. )
|
Hammond Manufacturing L...
|
| R190-112-000 |
Enclosures can be Factory Modified ( Milling, Drilling, Printing etc. )
|
Hammond Manufacturing L...
|
| R191-092-000 |
Enclosures can be Factory Modified ( Milling, Drilling, Printing etc. )
|
Hammond Manufacturing L...
|
| R191-054-000 |
Enclosures can be Factory Modified ( Milling, Drilling, Printing etc. )
|
Hammond Manufacturing L...
|
| R191-052-000 |
Enclosures can be Factory Modified ( Milling, Drilling, Printing etc. )
|
Hammond Manufacturing L...
|
| R191-094-000 |
Enclosures can be Factory Modified ( Milling, Drilling, Printing etc. )
|
Hammond Manufacturing L...
|
