| PART |
Description |
Maker |
| 017055-000 |
MOLDED PARTS SPECIFICATION CONTROL DRAWING
|
Tyco Electronics
|
| 2-1196708-4 |
Thermofit Molded Parts Specification Control Drawing Limited Distribution
|
Tyco Electronics
|
| QAS |
MOLDED PARTS
|
Qualtek Electronics Corporation
|
| 222D211 014291-000 |
THERMOFIT MOLDED PARTS SEPCIFICATION CONTROL DRAWING
|
Tyco Electronics
|
| QMR170 QMR150 QMR180 QMR130 QMR160 QMR110 QMR120 Q |
MOLDED PARTS
MOLDED PARTS
|
Qualtek Electronics Corporation
Qualtek Electronics Cor...
|
| HSI2CMOD |
Evaluates: HS I2C-Compatible Parts
Evaluates: HS I2C-Compatible Parts
|
Maxim Integrated Products
|
| HLS624-473TT HLS640-473TT HLS628-473TT HLS628-473T |
24 POS MOLDED DIP SOCKET DIP24, IC SOCKET
40 POS MOLDED DIP SOCKET DIP40, IC SOCKET
28 POS MOLDED DIP SOCKET DIP28, IC SOCKET
32 POS MOLDED DIP SOCKET DIP32, IC SOCKET
16 POS MOLDED DIP SOCKET DIP16, IC SOCKET
20 POS MOLDED DIP SOCKET DIP20, IC SOCKET
|
Advanced Interconnections, Corp.
|
| T323A474J035AS-C T323A474J035AT-C T323A474K035AS-C |
TANTALUM MOLDED
DISSIPATION FACTOR: Maximum DF limits are shown in corresponding series part number listings on pages 44-48. See Application Notes Section, page 76 for addi-tional
PERFORMANCE CHARACTERISTICS
TANTALUM MOLDED / AXIAL ?MIL-PRF-49137/1&5
TANTALUM MOLDED / AXIAL . MIL-PRF-49137/1&5
|
Kemet Corporation
|
| B44031-B115 B44031 |
Mounting Parts
|
EPCOS[EPCOS]
|
| M51951A M51951B M51951BML M51952A M51952B |
Few external parts
|
TY Semiconductor Co., L...
|
| 1N4819 1N4816 20D8 10D05 10D1 10D10 10D2 10D4 10D6 |
1.5 AND 2.0 AMP MOLDED SILICON RECTIFIER DIODES
V(rrm): 700V; 1.5A molded silicon rectifier diode
From old datasheet system
1.5 AND 2.0 AMP MOLDED SILICON RECTIFIER DIODES 1.5.0安培成型一般整流二极管
V(rrm): 600V; 1.5A molded silicon rectifier diode
V(rrm): 800V; 1.5A molded silicon rectifier diode
|
IRF[International Rectifier]
International Rectifier, Corp.
|
| 8655MH5001 |
SHIELDED HOOD5 - TWO PARTS HOODS
|
FCI-CONNECTOR[FCI connector]
|
