| PART |
Description |
Maker |
| MC-7831-HA MC-7831-HA-AZ |
NECs 1 GHz GaAs CATV 18 dB PUSH-PULL AMPLIFIER
|
CEL[California Eastern Labs]
|
| MC-7856 MC-7856G |
CATV 22 dB PUSH-PULL AMPLIFIER
|
NEC Corp.
NEC[NEC]
CEL[California Eastern Labs]
|
| MC7856 |
CATV 22 dB PUSH-PULL AMPLIFIER
|
NEC[NEC]
|
| TAT8858A1H-PCB24V TAT8858A1H-PCB12V TAT8858A1H-15 |
CATV Infrastructure Push-Pull Amplifier
|
TriQuint Semiconductor
|
| MC-7832-2015 |
870 MHz CATV 22 dB PUSH-PULL AMPLIFIER
|
Quanzhou Jinmei Electro...
|
| MC-7834-KC-AZ |
NECs 870 MHz GaAs CATV 20 dB PUSH-PULL AMPLIFIER
|
California Eastern Laboratories
|
| ACA2402RS7P0 ACA2402RS7P2 ACA2402S7P0 ACA2402S7TR |
750/870/1000 MHz CATV Push-Pull Line Amplifier
|
ANADIGICS, Inc
|
| CGY1043 |
1 GHz - 23 dB gain GaAs push-pull amplifier
|
NXP Semiconductors
|
| DS3687H DS3687J-8/A DS3687N-8/B DS3687H/A DS3687N- |
Dual Peripheral Driver
µP Supervisory, Push/Pull Active-Low, TH: 1.8V, Timeout: 100ms, SOT23 3-pin
µP Supervisory, Push/Pull Active-Low, TH: 1.6V, Timeout: 100ms, SOT23 3-pin
µP Supervisory, Push/Pull Active-Low, TH: 2.3V, Timeout: 20ms, SOT23 3-pin
µP Supervisory, Push/Pull Active-Low, TH: 2.0V, Timeout: 100ms, SOT23 3-pin
µP Supervisory, Push/Pull Active-Low, TH: 1.8V, Timeout: 100ms, SOT23 3-pin 双外围驱动器
|
KEMET Corporation
|
| HMC754S8GE |
GaAs HBT HIGH LINEARITY PUSH-PULL AMPLIFIER, 75 Ohm, DC - 1 GHz
|
Hittite Microwave Corporation
|
| ADM809-5LARTZ-RL7 ADM809-5LAKSZ-RL7 ADM809-5SAKS-R |
Microprocessor Supervisory Circuit in 3-Lead SOT-23 & SC70, Active-Low Push-Pull Output; Package: SC70; No of Pins: 3; Temperature Range: Industrial 1-CHANNEL POWER SUPPLY SUPPORT CKT, PDSO3
|
Analog Devices, Inc.
ANALOG DEVICES INC
|
| MCP6542 MCP6542-I/MS MCP6542-I/P MCP6542-I/SN MCP6 |
The MCP6544 is a Push-pull, quad comparator. This single-ended device operates from 1.6V to 5.5V,with typical quiescent current of ...
The MCP6541 is a Push-pull, single comparator. This single-ended device operates from 1.6V to 5.5V, with typical quiescent current ...
Push-Pull Output Sub-Microamp Comparators
The MCP6544 is a Push-pull, quad comparator. This single-ended device operates from 1.6V to 5.5V, with typical quiescent current of 600 nA and a maximum of 1 microamp. This device is offered in the 16 lead PDIP, SOIC and 14 lead TSSOP pack
The MCP6543 is a Push-pull, single comparator. This single-ended device operates from 1.6V to 5.5V, with typical quiescent current of 600 nA and a maximum of 1 microamp. This device is offered in the eight lead PDIP, SOIC and MSOP package,
The MCP6542 is a Push-pull, dual comparator. This single-ended device operates from 1.6V to 5.5V, with typical quiescent current of 600 nA and a maximum of 1 microamp. This device is offered in the eight lead PDIP, SOIC and MSOP package.
The MCP6541 is a Push-pull, single comparator. This single-ended device operates from 1.6V to 5.5V, with typical quiescent current of 600 nA and a maximum of 1 microamp. This device is offered in the eight lead PDIP, SOIC, MSOP and five le
The MCP6543 is a Push-pull, single comparator. This single-ended device operates from 1.6V to 5.5V,with typical quiescent current ...
The MCP6542 is a Push-pull, dual comparator. This single-ended device operates from 1.6V to 5.5V,with typical quiescent current of ...
From old datasheet system
IC,VOLT COMPARATOR,DUAL,CMOS,TSSOP,8PIN,PLASTIC
|
Microchip Technology Inc.
|
|
