| PART |
Description |
Maker |
| ADG5433 ADG5434 |
High Voltage Latch-up Proof Triple SPDT Switches
High Voltage Latch-up Proof Quad SPDT Switches
|
Analog Devices
|
| ADG5409BRUZ ADG5409BRUZ-REEL7 ADG5409BCPZ-REEL7 AD |
High Voltage Latch-Up Proof, 4-/8-Channel Multiplexers
8-CHANNEL, SGL ENDED MULTIPLEXER, PDSO16
|
Analog Devices
ANALOG DEVICES INC
|
| AD7592 AD7592DI AD7592DIBQ AD7592DIKN AD7592DIKP A |
Dual 5V SPDT Latch Up Proof Switch with Overvoltage Protection
DI CMOS ANALOG SWITCHES WITH DATA LATCHES QUAD 1-CHANNEL, SGL POLE SGL THROW SWITCH, CDIP16
DI CMOS ANALOG SWITCHES WITH DATA LATCHES QUAD 1-CHANNEL, SGL POLE SGL THROW SWITCH, PQCC20
Quad ±15V SPST Latch Up Proof Switch with Overvoltage Protection
Dual ±15V SPDT Latch Up Proof Switch with Overvoltage Protection
|
Analog Devices, Inc.
AD[Analog Devices]
ANALOG DEVICES INC
|
| C9312SK-06 |
Flat panel sensor High-speed, High reliability, 110 kV (X-ray tube voltage) proof
|
Hamamatsu Photonics
|
| MP1L01721035MP MP1L01721035RD MP1L01721035RH MP1L0 |
Contactless Linear Sensor - IP64 Debris Proof, Splash Proof
|
List of Unclassifed Manufac...
ETC
List of Unclassifed Manufacturers
http://
List of Unclassifed Man...
|
| AH266 |
High Voltage Hall Effect Latch
|
Anachip
|
| AH27807 AH278Z4-BE1 |
HIGH VOLTAGE HALL EFFECT LATCH 高压霍尔效应锁存
|
BCD Semiconductor Manufacturing Limited
BCD Semiconductor Manufacturing, Ltd.
|
| ATS266IS4A ATS266S4 ATS266S4A |
4-28V high voltage hall effect latch
|
ATC Analog Technology
|
| AH3775-P-A AH3775-P-B AH3775-SA-A AH3775-SA-B AH37 |
HIGH-VOLTAGE MEDIUM-SENSITIVITY HALL EFFECT LATCH
|
Diodes Incorporated
|
| IW4042B IW4042BN |
Quad Clocked ??Latch High-Voltage Silicon-Gate CMOS
|
IK Semicon Co., Ltd
|
| TC1413 TC1413N TC1413NCOA TC1413NCOA713 TC1413NEUA |
3A High-Speed MOSFET Drivers
The TC1413/1413N are 3A CMOS buffer/drivers. They will not latch up under any conditions within their power and voltage ratings. ...
The TC1413/1413N are 3A CMOS buffer/drivers. They will not latch up under any conditions within their power and voltage ratings. They are not subject to damage when up to 5V of noise spiking of either polarity that occurs on the ground pin
|
http://
Microchip
|
