| PART |
Description |
Maker |
| GDMBD2004 |
The GDMBD2004 is designed for ultra high speed switching
SURFACE MOUNT,SWITCHING DIODE
|
E-Tech Electronics LTD
GTM CORPORATION
|
| BN1A4M |
The BN1A4M is designed for use in medium speed switching circuit.
|
NEC[NEC]
|
| CM600DY-24S |
Powerex Dual IGBT Modules are designed for use in switching applications.
|
Powerex Power Semiconductors
|
| HH-1174-10 |
The HH-1174-10 is designed to be used with high frequency switching power supplies
|
JMK Inc.
|
| QXX40K7TP |
40 Amp bi-directional solid state switch series is designed for AC switching
|
Littelfuse
|
| QXX12RH2 QXX12RH5 QXX12LH5 QXX12LH2 QXX12NH2 QXX12 |
12 Amp bi-directional solid state switch series is designed for AC switching
ALTERNISTOR TRIAC, TO-263AB
RoHS Compliant, Solid-state switching eliminates arcing or contact bounce that create voltage transients
|
Littelfuse
|
| IR1152S |
One Cycle Control PFC IC designed to operate in continuous conduction mode (CCM), Fixed 66kHz switching frequency
|
International Rectifier
|
| GD751SD |
The GD751SD is designed for high speed switching for detection and high reliability.
|
E-Tech Electronics LTD
|
| P0502NL P0527NL P0429NL P0422NL P0420NL P0421NL P0 |
Designed for DC/DC converters, Wide variety of inductor sizes and current ratings available
Solutions based on impedance, size and current, Designed for DC/DC converters, Dielectric strength: 1000VRMS
|
Pulse A Technitrol Company
|
| SF100CB100 |
From old datasheet system
Isolated power MOSFET module designed for fast switching applications of high voltage and current with a fast recovery diode
|
SANREX[SanRex Corporation]
|
| DMG7430LFG DMG7430LFG-7 DMG7430LFG-15 DMG7430LFG-1 |
N-CHANNEL ENHANCEMENT MODE MOSFET POWERDI?
This MOSFET has been designed to minimize the on-state resistance (RDS(on)) and yet maintain superior switching performance, making it ideal for high efficiency power management applications.
|
Diodes Incorporated
|
| TC1037 TC1037CECT TC1039 TC1038 TC1039CECH TC1038C |
The TC1037/1038/1039 are single, low-power comparators designed for low-power applications. These comparators are specifically designed for operation from a single supply. However, operation from dual supplies also is possible, and power s
Linear Building Block . Single Comparator in SOT Packages
|
MICROCHIP[Microchip Technology]
Microchip Technology Inc.
|
