| PART |
Description |
Maker |
| T350A105K025AT |
Tantalum, MnO2 Tantalum, Commercial Grade, T350, 1 uF, 10%, 25 V, Radial, Solid Tantalum, Conformal, Dipped, Lead Spacing =2.54mm
|
Kemet Corporation
|
| TAJB107M006RNJ TAJD107K016RNJ TAJB226M006RNJ TAJB2 |
General purpose SMT chip tantalum series
Standard Tantalum
|
AVX Corporation
|
| CT79475X0100A2 735D275X0125A2 735D106X0063A2 735D1 |
Wet Tantalum Capacitors with Glass to Tantalum Hermetic Seal CECC 30202 Approved
|
Vishay Siliconix
|
| 285D07 285D126X0250F2 285D126X9250C0 285D126X9250C |
Tantalum-Cased-Tantalum Sintered Anode TANTALEX㈢ Capacitors for Operation to 125 ∑C
Tantalum-Cased-Tantalum Sintered Anode TANTALEX? Capacitors for Operation to 125 °C
Tantalum-Cased-Tantalum Sintered Anode TANTALEX庐 Capacitors for Operation to 125 掳C
Tantalum-Cased-Tantalum Sintered Anode TANTALEX垄莽 Capacitors for Operation to 125 隆?C
|
Vishay Siliconix
|
| T495B106K025ATE750 |
Tantalum, MnO2 Tantalum, T495, 10 uF, 10%, 25 V, 3528, SMD, MnO2, Molded, Low ESR, 750 mOhms, 2.1mm
|
Kemet Corporation
|
| 738D 738D685X0075A2 738D186X0125C2 738D335X0125AR |
Wet Tantalum Capacitors with Glass to Tantalum Hermetic Seal, Sintered Anode TANTALEX Capacitors 液体钽电容器的钽玻璃密封产品，烧结电容器阳极TANTALEX
|
Vishay Intertechnology,Inc.
Vishay Intertechnology, Inc.
|
| TCKIV475DT |
4.7UF, 10%, 35V, TANTALUM CAP, TANT, 35V, 2917 CAPACITOR, TANTALUM, SOLID, POLARIZED, 35 V, 4.7 uF, SURFACE MOUNT, 2916
|
Cal-Chip Electronics
|
| T495B106K020ATE1K0 |
Tantalum, MnO2 Tantalum, T495, 10 uF, 10%, 20 V, 3528, SMD, MnO2, Molded, Low ESR, 1 Ohms, Height Max = 2.1mm
|
Kemet Corporation
|
| T495D107K010ATE050 |
Tantalum, MnO2 Tantalum, T495, 100 uF, 10%, 10 V, 7343, SMD, MnO2, Molded, Low ESR, 50 mOhms, Height Max = 3.1mm
|
Kemet Corporation
|
| T495D226K035ATE260 |
Tantalum, MnO2 Tantalum, T495, 22 uF, 10%, 35 V, 7343, SMD, MnO2, Molded, Low ESR, 260 mOhms, Height Max = 3.1mm
|
Kemet Corporation
|
| T495D226K025ATE230 |
T495, Tantalum, MnO2 Tantalum, 22 uF, 10%, 25 V, 7343, SMD, MnO2, Molded, Low ESR, 230 mOhms, Height Max = 3.1mm
|
Kemet Corporation
|
|
