| PART |
Description |
Maker |
| HA4201CB HA4201CB96 HA4201 FN3680 |
From old datasheet system
480MHz, 1 x 1 Video Crosspoint Switch with Tally Output
480MHz/ 1 x 1 Video Crosspoint Switch with Tally Output
|
INTERSIL[Intersil Corporation]
|
| CPFC74NP-PS10H2A15 CPFC74NP-CB10M4 CPFC74NP-CB08M6 |
2 FUNCTIONS, 2.5 A, DATA LINE FILTER ROHS COMPLINT, SMD, 4 PIN
2 FUNCTIONS, 1.5 A, DATA LINE FILTER ROHS COMPLINT, SMD, 4 PIN
2 FUNCTIONS, 3 A, DATA LINE FILTER ROHS COMPLIANT, SMD, 4 PIN
2 FUNCTIONS, DATA LINE FILTER ROHS COMPLINT, SMD, 4 PIN
2 FUNCTIONS, 2 A, DATA LINE FILTER ROHS COMPLINT, SMD, 4 PIN
DC COMMON MODE CHOKE COIL
|
Sumida, Corp.
Sumida Corporation
|
| HA4244CB H4244C HA4244 |
480MHz, 1 x 1 Video Crosspoint Switch with Synchronous Enable
|
INTERSIL[Intersil Corporation]
|
| E1UAA18-20.480M |
CRYSTALS 50/100 0 70 18PF 20.480MHZ ATCUT FUND HC-49/US
|
ECLIPTEK CORP
|
| HA4201 |
Switch, Unidirectional, Video, 480MHz, 1x1, with Enable Indicator
|
Intersil
|
| E1SNA20-20.480M |
CRYSTALS 10/15 0 70 20PF 20.480MHZ ATCUT FUND HC-49/UP QUARTZ CRYSTAL RESONATOR, 20.48 MHz
|
Ecliptek, Corp.
|
| IP4352CX24/LF135 |
9-channel SD-memory card interface filter with ESD protection to IEC 61000-4-2 level 4, NAX000, Reel Pack, SMD, Large 9 FUNCTIONS, 5 V, DATA LINE FILTER
|
NXP Semiconductors N.V.
|
| TB0758A |
SAW Filter 256MHz (SMD 5.0隆驴7.0 mm)
SAW Filter 256MHz (SMD 5.0×7.0 mm)
|
TAI-SAW TECHNOLOGY CO., LTD.
|
| TB0221A |
SAW IF Filter 374MHz (SMD 3.8隆驴3.8 mm)
SAW IF Filter 374MHz (SMD 3.8×3.8 mm)
|
TAI-SAW TECHNOLOGY CO., LTD.
TAI-SAW TECHNOLOGY CO.,...
|
| TB0391A |
SAW Filter 240MHz (SMD 7隆驴5 mm)
SAW Filter 240MHz (SMD 7×5 mm)
|
TAI-SAW TECHNOLOGY CO., LTD.
|
| TA0486A |
SAW Filter 285MHz SMD 5.0隆驴5.0 mm
SAW Filter 285MHz SMD 5.0×5.0 mm
|
TAI-SAW TECHNOLOGY CO., LTD.
|
