| PART |
Description |
Maker |
| ARE1303 ARE1303Z ARE1306 ARE1309 ARE1312 ARE1312Z |
RE-relay. 2.6 GHz 75 ohm relays for broadcasting industry. Standard PC board terminal. Nominal voltage 4.5 V DC.
2.6 GHZ 75з RELAYS FOR BROADCASTING INDUSTRY
2.6 GHz 75 RELAYS FOR BROADCASTING INDUSTRY
2.6 GHz 75?/a> RELAYS FOR BROADCASTING INDUSTRY
|
Matsushita Electric Works(Nais)
NAIS[Nais(Matsushita Electric Works)]
|
| MCP41010MCP42010 MCP41050-I/P MCP41050-E/SN MCP410 |
Single/Dual Digital Potentiometer with SPI?/a> Interface
Single/Dual Digital Potentiometer with SPIInterface 双数字电位器接口与SPI
The MCP42100 digital potentiometer features two independent channels, 8-bit resolution (256 wiper steps), and an industry-standard ...
The MCP42010 digital potentiometer features two independent channels, 8-bit resolution (256 wiper steps), and an industry-standard ...
The MCP41100 single-channel digital potentiometer features 8-bit resolution (256 wiper steps), and an industry-standard SPI™ ...
The MCP41010 single-channel digital potentiometer features 8-bit resolution (256 wiper steps), and an industry-standard SPI™ ...
The MCP42100 digital potentiometer features two independent channels, 8-bit resolution (256 wiper steps), and an industry-standard SPI™ serial interface. The wiper position varies linearly and is controlled via the SPI interface. The
The MCP42050 digital potentiometer features two independent channels, 8-bit resolution (256 wiper steps), and an industry-standard SPI™ serial interface. The wiper position varies linearly and is controlled via the SPI interface. The
The MCP42010 digital potentiometer features two independent channels, 8-bit resolution (256 wiper steps), and an industry-standard SPI™ serial interface. The wiper position varies linearly and is controlled via the SPI interface. The
The MCP41100 single-channel digital potentiometer features 8-bit resolution (256 wiper steps), and an industry-standard SPI™ serial interface. The wiper position varies linearly and is controlled via the SPI interface. The MCP41100 ha
The MCP41050 single-channel digital potentiometer features 8-bit resolution (256 wiper steps), and an industry-standard SPI™ serial interface. The wiper position varies linearly and is controlled via the SPI interface. The MCP41050 ha
The MCP41010 single-channel digital potentiometer features 8-bit resolution (256 wiper steps), and an industry-standard SPI™ serial interface. The wiper position varies linearly and is controlled via the SPI interface. The MCP41010 ha
400000 SYSTEM GATE 2.5 VOLT FPGA - NOT RECOMMENDED for NEW DESIGN
The MCP42050 digital potentiometer features two independent channels, 8-bit resolution (256 wiper steps), and an industry-standard ...
The MCP41050 single-channel digital potentiometer features 8-bit resolution (256 wiper steps), and an industry-standard SPI™ ...
IC,DIGITAL POTENTIOMETER,CMOS,DIP,8PIN,PLASTIC
Single/Dual Digital Potentiometer with SPI Interface
Single/Dual Digital Potentiometer with SPI?/a> Interface
Single/Dual Digital Potentiometer with SPI?Interface
|
Microchip Technology, Inc.
Microchip Technology Inc.
|
| MAC510027-32.768KHZ-G MACF510027-32.768KHZ-G MAC51 |
Industry Standard Package
|
MMD Components
|
| IRF7493PBF-1 IRF7493PBF-1-15 |
Industry-standard pinout SO-8 Package
|
International Rectifier
|
| AGQ300-48S1V2P-4L |
Industry standard quarter brick
|
Emerson Network Power
|
| FL75L05A FL75L10A FL75L20 |
Industry standard footprint and pin-out
|
Delta Electronics, Inc.
|
| ACTUM5SMDGULLWING |
available in industry standard package & specifications
|
Advanced Crystal Technology
|
| IRF7205PBF-1-15 |
Industry-standard pinout SO-8 Package
|
International Rectifier
|
| IRF7832PBF-1 IRF7832PBF-1-15 |
Industry-standard pinout SO-8 Package
|
International Rectifier
|
| IRF7907PBF-1 IRF7907PBF-1-15 |
Industry-standard pinout SO-8 Package
|
International Rectifier
|
| IRF7469PBF-1-15 |
Industry-standard pinout SO-8 Package
|
International Rectifier
|
