| PART |
Description |
Maker |
| SH3002-DC80A |
Near edge thermal printhead (with thermal historical control)
|
Rohm
|
| NE2001-VA20A NE2001-VA20 |
Near edge thermal printhead (8 dots / mm)
Thermal Printheads > Fro Plastic Card > NE200*-, 300*-VA@ Series
|
ROHM[Rohm]
Rohm CO.,LTD.
|
| NE3002-GV10A |
Near edge thermal Printhead
|
Rohm CO.,LTD.
ROHM[Rohm]
|
| NE3004-VA30A |
Near edge thermal printhead (300 dots / inch)
|
ROHM[Rohm]
|
| SH3002-DC90A |
Near edge thermal printhead (300 dots / inch)
|
Rohm
|
| 74AUP1G80GW 74AUP1G80GM 74AUP1G80GN |
Low-power D-type flip-flop; positive edge trigger 低功耗D型触发器;上升沿触
Low-power D-type flip-flop; positive edge trigger AUP/ULP/V SERIES, POSITIVE EDGE TRIGGERED D FLIP-FLOP, INVERTED OUTPUT, PDSO6
|
NXP Semiconductors N.V.
|
| HCTS374T HCTS374KTR HCTS374DTR |
Dual Positive-Edge-Triggered D-type Flip-Flops With Clear And Preset 20-LCCC -55 to 125
1024 x 18 Synchronous FIFO Memory 68-CPGA -55 to 125
Radiation Hardened Octal D-Type Flip-Flop, Three-State, Positive Edge Triggered
|
Intersil Corporation
|
| 4400.0179 4400.0178 4400.0120 4400.0114 T11-811 |
Circuit Breaker for Equipment thermal, Drop-in type, Reset type, Quick connect terminals
|
Schurter Inc.
|
| 4400.0010 |
Circuit Breaker for Equipment thermal, Threaded neck type, Reset type, Quick connect terminals
|
Schurter Inc.
|
| T11-123AB-1.23 T11-211-18 |
Circuit Breaker for Equipment thermal, Threaded neck type, Reset type, Quick connect terminals
|
Schurter Inc.
|
| 74AUP2G80GN 74AUP2G80GD |
Low-power dual D-type flip-flop; positive-edge trigger AUP/ULP/V SERIES, DUAL POSITIVE EDGE TRIGGERED D FLIP-FLOP, INVERTED OUTPUT, PDSO8
Low-power dual D-type flip-flop; positive-edge trigger 低功耗双D型触发器;上升沿触
|
NXP Semiconductors N.V.
|
