| PART |
Description |
Maker |
| LTC7541A-15 |
Improved Industry Standard CMOS 12-Bit Multiplying DAC
|
Linear Technology
|
| LTC7541A LTC7541AKN LT7541A LTC7541 LTC7541AJN LTC |
Improved Industry Standard CMOS 12-Bit multiplying DAC
From old datasheet system
|
LINEAR TECHNOLOGY CORP
|
| ISL684007 ISL6845IUZ ISL6840 ISL6840IB ISL6840IBZ |
Improved Industry Standard Single-Ended Current Mode PWM Controller
|
INTERSIL[Intersil Corporation]
|
| LTC7545ACNPBF LTC7545ABNPBF LTC7545ABSWPBF |
Improved Industry Standard Parallel 12-Bit Multiplying DAC; Package: PDIP; No of Pins: 20; Temperature Range: 0°C to 70°C PARALLEL, WORD INPUT LOADING, 12-BIT DAC, PDIP20
Improved Industry Standard Parallel 12-Bit Multiplying DAC; Package: PDIP; No of Pins: 20; Temperature Range: -40°C to 85°C PARALLEL, WORD INPUT LOADING, 12-BIT DAC, PDIP20
Improved Industry Standard Parallel 12-Bit Multiplying DAC; Package: SO; No of Pins: 20; Temperature Range: -40°C to 85°C
|
Linear Technology, Corp.
LINEAR TECHNOLOGY CORP
|
| TC962COE TC962CPA TC962EPA TC962IJA TC962MJA TC962 |
The TC962 is an advanced version of the industry-standard 7662 high-voltage DC-to-DC converter. Using improved design techniques and CMOS construction, the TC962 can source as much as 80mA versus the 7662 ’s 20mA capability. As an in
From old datasheet system
High Current Charge Pump DC-to-DC Converter
|
MICROCHIP[Microchip Technology]
Microchip Technology Inc.
|
| ISL6844IBZ-T |
Improved Industry-Standard Single-Ended PWM Controller; Temperature Range: -40°C to 85°C; Package: 8-SOIC T&R 1 A SWITCHING CONTROLLER, 2000 kHz SWITCHING FREQ-MAX, PDSO8
|
Intersil, Corp.
|
| EMA6DXV5T5 EMA6DXV5T1 EMA6DXV5T1/D |
Dual Common Emitter Bipolar Resistor Transistor
Improved Industry-Standard Single-Ended PWM Controller; Temperature Range: -40°C to 85°C; Package: 8-MSOP
Dual Common Emitter Bias Resistor Transistor PNP Silicon Surface Mount Transistors with Monolithic Bias Resistor Network
|
ON Semiconductor
http://
|
| SHM-4860 SHM-4860MC SHM-4860MM SHM-4860/883 |
Industry-Standard, High-Speed .01% Sample-Hold Amplifiers
Industry-Standard, High-Speed 0.01% Sample-Hold Amplifiers 工业标准，高速0.01％采样保持放大器
|
Electronic Theatre Controls, Inc.
|
| MCP41010MCP42010 MCP41050-I/P MCP41050-E/SN MCP410 |
Single/Dual Digital Potentiometer with SPI?/a> Interface
Single/Dual Digital Potentiometer with SPIInterface 双数字电位器接口与SPI
The MCP42100 digital potentiometer features two independent channels, 8-bit resolution (256 wiper steps), and an industry-standard ...
The MCP42010 digital potentiometer features two independent channels, 8-bit resolution (256 wiper steps), and an industry-standard ...
The MCP41100 single-channel digital potentiometer features 8-bit resolution (256 wiper steps), and an industry-standard SPI™ ...
The MCP41010 single-channel digital potentiometer features 8-bit resolution (256 wiper steps), and an industry-standard SPI™ ...
The MCP42100 digital potentiometer features two independent channels, 8-bit resolution (256 wiper steps), and an industry-standard SPI™ serial interface. The wiper position varies linearly and is controlled via the SPI interface. The
The MCP42050 digital potentiometer features two independent channels, 8-bit resolution (256 wiper steps), and an industry-standard SPI™ serial interface. The wiper position varies linearly and is controlled via the SPI interface. The
The MCP42010 digital potentiometer features two independent channels, 8-bit resolution (256 wiper steps), and an industry-standard SPI™ serial interface. The wiper position varies linearly and is controlled via the SPI interface. The
The MCP41100 single-channel digital potentiometer features 8-bit resolution (256 wiper steps), and an industry-standard SPI™ serial interface. The wiper position varies linearly and is controlled via the SPI interface. The MCP41100 ha
The MCP41050 single-channel digital potentiometer features 8-bit resolution (256 wiper steps), and an industry-standard SPI™ serial interface. The wiper position varies linearly and is controlled via the SPI interface. The MCP41050 ha
The MCP41010 single-channel digital potentiometer features 8-bit resolution (256 wiper steps), and an industry-standard SPI™ serial interface. The wiper position varies linearly and is controlled via the SPI interface. The MCP41010 ha
400000 SYSTEM GATE 2.5 VOLT FPGA - NOT RECOMMENDED for NEW DESIGN
The MCP42050 digital potentiometer features two independent channels, 8-bit resolution (256 wiper steps), and an industry-standard ...
The MCP41050 single-channel digital potentiometer features 8-bit resolution (256 wiper steps), and an industry-standard SPI™ ...
IC,DIGITAL POTENTIOMETER,CMOS,DIP,8PIN,PLASTIC
Single/Dual Digital Potentiometer with SPI Interface
Single/Dual Digital Potentiometer with SPI?/a> Interface
Single/Dual Digital Potentiometer with SPI?Interface
|
Microchip Technology, Inc.
Microchip Technology Inc.
|
| IRLTS6342PBF |
Industry-Standard TSOP-6 Package
|
International Rectifier
|
| ACTUM5SMDGULLWING |
available in industry standard package & specifications
|
Advanced Crystal Technology
|
