| PART |
Description |
Maker |
| MIC7111 MIC7111BM5 |
40000 SYSTEM GATE 3.3 VOLT LOGIC CELL AR - NOT RECOMMENDED for NEW DESIGN
1.8V IttyBitty⑩ Rail-to-Rail Input/Output Op Amp Preliminary Information
1.8V IttyBitty Rail-to-Rail Input/Output Op Amp Preliminary Information
1.8V IttyBittyTM Rail-to-Rail Input/Output Op Amp
|
Micrel Semiconductor,Inc.
MICREL[Micrel Semiconductor]
|
| ISL28006FH-100EVAL1Z ISL28006 ISL28006FH-20EVAL1Z |
Micropower, Rail to Rail Input Current Sense Amplifier with Voltage Output
|
Intersil Corporation
|
| LT1880 1880F |
SOT-23, Rail-to-Rail Output, Picoamp Input Current Precision Op Amp
From old datasheet system
|
Linear
|
| ISL2800511 ISL28005FH100Z-T7A |
Micropower, Rail-to-Rail Input Current Sense Amplifier
OP-AMP, 3300 uV OFFSET-MAX, PDSO5
|
Intersil Corporation
|
| OP19602 OP296 OP196HRU |
15V; micropower, rail-to-rail input and output operational amplifier. For battery monitoring, sensor conditioners
Micropower, Rail-to-Rail Input and Output Operational Amplifiers
|
Analog Devices
|
| MCP6142 MCP6144 MCP6143 MCP6141 MCP6142-I/MS MCP61 |
600 nA, Non-Unity Gain Rail-to-Rail Input/Output Op Amps
The MCP6142 is a dual 600nA op amp offering rail to rail input & output over the 1.4 to 5.5V operating range. This amplifier ...
The MCP6143 is a single with chip select 600nA op amp offering rail to rail input & output over the 1.4 to 5.5V operating range. ...
The MCP6141 is a single 600nA op amp offering rail to rail input & output over the 1.4 to 5.5V operating range. This amplifier has a typical GBWP of 100kHz with a maximum quiescent current of 1 microampere.
The MCP6142 is a dual 600nA op amp offering rail to rail input & output over the 1.4 to 5.5V operating range. This amplifier has a typical GBWP of 100kHz with a maximum quiescent current of 1 microampere.
The MCP6143 is a single with chip select 600nA op amp offering rail to rail input & output over the 1.4 to 5.5V operating range. This amplifier has a typical GBWP of 100kHz with a maximum quiescent current of 1 microampere.
The MCP6144 is a quad 600nA op amp offering rail to rail input & output over the 1.4 to 5.5V operating range. This amplifier has a typical GBWP of 100kHz with a maximum quiescent current of 1 microampere.
The MCP6144 is a quad 600nA op amp offering rail to rail input & output over the 1.4 to 5.5V operating range. This amplifier ...
The MCP6141 is a single 600nA op amp offering rail to rail input & output over the 1.4 to 5.5V operating range. This amplifier ...
|
Microchip Technology Inc.
MICROCHIP[Microchip Technology]
|
| AZV831KSTR-G1 AZV831KTR-G1 |
Single Low Bias Current, Low Voltage, Rail-to-Rail Input/Output CMOS Operational Amplifier
|
BCD Semiconductor Manufacturing Limited
|
| LT1638 LT1638CMS8 LT1638CN8 LT1638CS8 LT1638IN8 LT |
1.2MHz, 0.4V/us Over-The-TopTM Micropower Rail-to-Rail Input and Output Op Amps DUAL OP-AMP, 1250 uV OFFSET-MAX, 1.2 MHz BAND WIDTH, PDSO8
1.2MHz/ 0.4V/us Over-The-TopTM Micropower Rail-to-Rail Input and Output Op Amps
From old datasheet system
|
Linear Technology, Corp.
LINER[Linear Technology]
|
| MSV932GTR MSV932GU MSV932MGTR |
Rail-to-Rail Input and Output Low Voltage 2.1V, Low Supply Current Dual Amplifiers
|
MOSA ELECTRONICS
|
| BUS-66300II-883B BUS-66301II-883B BUS-66301II-B |
Rail-to-rail input/output 20 MHz GBP operational amplifiers
Rail-to-rail input/output 8 MHz operational amplifiers MIL-STD-1553/ARINC总线控制 RTU通讯
|
Advanced Analog Technology, Inc.
|
