| PART |
Description |
Maker |
| HL6363MG HL6362MG |
Low Operating Current Visible Laser Diode
|
OPNEXT[Opnext. Inc.]
|
| MCP60104 MCP604T MCP601 MCP601-E_CH MCP601-E_OT MC |
MCP601 operational amplifier (op amp) has a gain bandwidth product of 2.8 MHz with low typical operating current of 230 and an offset ...
The MCP602 dual operational amplifier (op amp) has a gain bandwidth product of 2.8 MHz with low typical operating current of 230 ...
MCP603 operational amplifier (op amp) has a gain bandwidth product of 2.8 MHz with low typical operating current of 230 and an offset ...
The MCP604 quad operational amplifier (op amp) has a gain bandwidth product of 2.8 MHz with low typical operating current of 230. ...
2.7V to 5.5V Single-Supply CMOS Op Amps
|
MICROCHIP[Microchip Technology]
|
| MCP606-I/P MCP606-I/SN MCP606-I/ST MCP609-I/P MCP6 |
The MCP606 operational amplifier (op amp) has a gain bandwidth product of 155 kHz with a low typical operating current of 18.7 and ...
The MCP609 quad operational amplifier (op amp) has a gain bandwidth product of 155 kHz with a low typical operating current of 18.7 ...
The MCP608 operational amplifier (op amp) has a gain bandwidth product of 155 kHz with a low typical operating current of 18.7 and ...
The MCP607 dual operational amplifier (op amp) has a gain bandwidth product of 155 kHz with a low typical operating current of 18.7 ...
2.5V TO 5.5V MICROPOWER CMOS OP AMPS
|
Microchip Technology Inc.
|
| MCP6021 MCP6024 MCP6022 MCP6024T-I_ST MCP6021-E_P |
The MCP6022 dual operational amplifier (op amp) has a gain bandwidth product of 10 MHz with a low typical operating current of 1.0 ...
The MCP6021 operational amplifier (op amp) has a gain bandwidth product of 10 MHz with a low typical operating current of 1.0 mA ...
The MCP6024 quad operational amplifier (op amp) has a gain bandwidth product of 10 MHz with a low typical operating current of 1.0 ...
The MCP6023 operational amplifier (op amp) has a gain bandwidth product of 10 MHz with a low typical operating current of 1.0 mA ...
Rail-to-Rail Input/Output 10 MHz Op Amps
Rail-to-Rail Input/Output, 10 MHz Op Amps
|
MICROCHIP[Microchip Technology]
|
| NJU7116 |
SUPER LOW OPERATING CURRENT AND LOW OFFSET VOLTAGE
|
njr
|
| ZF-1519-3 |
Operating Voltage= 115/240 Vac Operating Current Max= 3.0 amp
|
JMK Inc.
|
| FF-1153-12.5 |
Operating Voltage = 250/480 Vac Operating Current Max= 12.5 amps
|
JMK Inc.
|
| HH-1199-6 |
Operating voltage = 125 / 250 v~ Operating current (max) = 6.0 amperes
|
JMK Inc.
|
| KK-0902-20-30 |
Operating Voltage = 250/480 Vac 3 PH Wye Operating Current Max= 20 & 30 amps
|
JMK Inc.
|
| HL6341MG HL6340MG HL6340MG_06 |
Circular Beam Low Operating Current
|
OPNEXT[Opnext. Inc.]
|
