| PART |
Description |
Maker |
| ECQV1J473JM ECQV1H474JL ECQV1333JM ECQV1104JM ECQV |
Stacked Metallized Film Capacitor
Designed for application where high density insertion of components is required. CAPACITOR, METALLIZED FILM, PLASTIC, 100 V, 0.015 uF, THROUGH HOLE MOUNT
Designed for application where high density insertion of components is required. CAPACITOR, METALLIZED FILM, PLASTIC, 100 V, 0.01 uF, THROUGH HOLE MOUNT
Designed for application where high density insertion of components is required. CAPACITOR, METALLIZED FILM, PLASTIC, 100 V, 0.27 uF, THROUGH HOLE MOUNT
Designed for application where high density insertion of components is required. CAPACITOR, METALLIZED FILM, PLASTIC, 100 V, 0.15 uF, THROUGH HOLE MOUNT
Designed for application where high density insertion of components is required. CAPACITOR, METALLIZED FILM, PLASTIC, 100 V, 0.47 uF, THROUGH HOLE MOUNT
|
Panasonic, Corp.
Panasonic Corporation
PANASONIC[Panasonic Semiconductor]
|
| SPGP0380A |
The SemiHow Power Switch product family is specially designed for an off-line SMPS with minimal external components.
|
SemiHow Co.,Ltd.
|
| HFBR1414 HFBR-1402 HFBR-1402C HFBR-1402M HFBR-1402 |
Components is Designed to Provide cost effective, High performance fiber optic communication links
FIBER OPTIC TRANSMITTER,MODULE-ST
|
HP[Agilent(Hewlett-Packard)]
|
| TC1278 TC1279 TC1278-10ENBTR TC1278-15ENBTR TC1278 |
The TC1278 and TC1279 are cost-effective system supervisor circuits designed to monitor VCC in digital systems and provide a reset signal to the host processor when necessary. No external components are required. The reset output is driven
The TC1278 and TC1279 are cost-effective system supervisor circuits designed to monitor VCC in digital systems and provide a reset ...
|
Microchip
|
| TCM810 TCM809 |
3-Pin Microcontroller Reset Monitors(3寮??寰???跺?澶???????
IC,VOLT DETECTOR,FIXED, 4.63V,CMOS,TSSOP,6PIN,PLASTIC
The TCM809 and TCM810 are cost-effective system supervisor circuits designed to monitor VCC in digital systems and provide a reset signal to the host processor when necessary. No external components are required. The reset output is driven
|
Microchip Technology Inc.
|
| HYB25D128160AT-6 HYB25D128400AT-7 HYB25D128800AT-7 |
DDR SDRAM Components - 128Mb (8Mx16) DDR333 (2.5-3-3)
DDR SDRAM Components - 128Mb (32Mx4) DDR266A (2-3-3)
DDR SDRAM Components - 128Mb (16mx8) DDR266A (2-3-3)
128 Mbit Double Data Rate SDRAM
|
Infineon
|
| MC12026 MC12026AD MC12026AP MC12026BD MC12026BP MC |
MECL PLL COMPONENTS 8/9, 16/17 DUAL MODULUS PRESCALER
MECL PLL COMPONENTS 8/9 16/17 DUAL MODULUS PRESCALER
MECL PLL COMPONENTS 8/9 / 16/17 DUAL MODULUS PRESCALER
MECL PLL COMPONENTS /9, 6/17 DUAL MODULUS PRESCALER ECL SERIES, PRESCALER, PDSO8
|
Motorola, Inc
MOTOROLA[Motorola Inc]
Motorola Mobility Holdings, Inc.
|
| MC12034AP MC12034AD MC12034BD MC12034BP |
MECL PLL COMPONENTS 2/33, 4/65 DUAL MODULUS PRESCALER
MECL PLL COMPONENTS 32/33 64/65 DUAL MODULUS PRESCALER
MECL PLL COMPONENTS 32/33 / 64/65 DUAL MODULUS PRESCALER
MECL PLL COMPONENTS ±32/33, ±64/65 DUAL MODULUS PRESCALER ECL SERIES, PRESCALER, PDSO8
|
MOTOROLA[Motorola Inc]
Motorola, Inc.
Motorola Mobility Holdings, Inc.
|
| 216400P 216.630P 216.400P 216.800P 216.160P 216.31 |
5 x 20 mm Fast-Acting Fuse
Designed to International Standards for use globally
Designed to International Standards for use globally
|
Littelfuse
|
| HYB18T1G160AC-3.7 HYB18T1G160AC-5 HYB18T1G400AC-3. |
DDR2 SDRAM Components - 1Gb (64Mx16) DDR2 533 (4-4-4); Available 3Q04
DDR2 SDRAM Components - 1Gb (64Mx16) DDR2 400 (3-3-3); Available 3Q04
DDR2 SDRAM Components - 1Gb (256Mx4) DDR2 533 (4-4-4); Available 3Q04
DDR2 SDRAM Components - 1Gb (256Mx4) DDR2 400 (3-3-3); Available 3Q04
DDR2 SDRAM Components - 1Gb (128Mx8) DDR2 533 (4-4-4); Available 3Q04
DDR2 SDRAM Components - 1Gb (128Mx8) DDR2 400 (3-3-3); Available 3Q04
|
Infineon
|
