PART |
Description |
Maker |
2-604771-9 |
Plastic Cable Wrap, Cable Clamps, Cable Ties and Accessories, Tapes and Sealants; CABLE TIE, NATURAL, 4" ( 1000 ) ( AMP )
|
Tyco Electronics
|
RACV06-24-LP RACV06-12-LP RACV06-LP |
Terminal Block Input/Output with Cable Clamps
|
Recom International Pow...
|
HD74LV2GU04A |
Triple Unbuffered Inverters (1) J-hook Turnbuckle with Lock Nuts, (2) Thimbles, (2) Low-profile Duplex Cable Clamps, (16) Sets of Cable supports (16) 1/4-20 Eye Bolts, (32) 1/4-20 Nuts, (32) Flat Washers, (16) Lock Washers
|
Hitachi Semiconductor
|
1-747947-7 5748677-2 5748677-3 5745854-3 5205729-1 |
HDP-20 Crimp Snap-In Contact Connectors HDF–20 (Ribbon Cable) Connectors Cable Clamps HDE–IDC Cable Connectors HDP-20 Crimp Snap-In Contact Connectors
|
Tyco Electronics
|
340MS026CG05-401-6 340MS026CG05-402-6 340MS026CG05 |
Backshells, Boots and Clamps
|
Glenair, Inc.
|
370MS038C0601-5N 370MS038M0601-5N 370MS038NF0601-5 |
Backshells, Boots and Clamps
|
Glenair, Inc.
|
A1008CHNF A1412CHNF A1212CHNF A1614CHNF A404CHNF A |
Continuous Hinge with Clamps, Type 4
|
List of Unclassifed Manufac...
|
B44033-A3178 B44033 B44033-A1143 B44033-A1178 B440 |
Half shells (semicircular supports) and tightening clamps
|
EPCOS[EPCOS]
|
MAX9657AEE MAX9658AEE MAX9657 |
Quad Video (Filter) Amplifiers with Input Sync-Tip Clamps
|
Maxim Integrated Products
|
390MS076M0501-5N 390MS076M0501-6N 390MS076M0502-5N |
Backshells, Boots and Clamps Backshells, Boots and Clamps
|
Glenair, Inc.
|
SD-87280-0600 0872800600 |
2.00mm (.079) Pitch Cable Holder, for Discrete Wire, Flat Cable and Ribbon Cable, 6 Circuits
|
Molex Electronics Ltd.
|
SD-87280-0800 0872800800 |
2.00mm (.079) Pitch Cable Holder, for Discrete Wire, Flat Cable and Ribbon Cable, 8 Circuits
|
Molex Electronics Ltd.
|