PART |
Description |
Maker |
MQF71.85-2500 |
Specification for monolithic crystal filter
|
Vectron International, Inc
|
GRM3195C1H152JA01D |
This product specification is applied to Chip Monolithic Ceramic Capacitor used for General Electronic equipment.
|
Murata Manufacturing Co., Ltd.
|
OPB16450UART |
This document provides the specification DS433 August 18, 2004 Product Specification
|
Xilinx, Inc.
|
MPC7450RXPXPND MPC7450RXPXPNS MPC7450PXPNS |
MPC7450 Specification for the XPC7450RXnnnPx Series part number specification pns Part Number Specification for the XPC7450RXnnnPx Series Part Number Specification for the XPC7451RXnnnPx Series
|
Motorola
|
55PC1246 |
This specification sheet forms a part of the latest issue of Raychem Specification 55PC.
|
Tyco Electronics
|
55PC6362 |
This specification sheet forms a part of the latest issue of Raychem Specification 55PC.
|
TE Connectivity Ltd
|
55PC2224 |
This specification sheet forms a part of the latest issue of Raychem Specification 55PC.
|
Tyco Electronics
|
55PC0223 |
This specification sheet forms a part of the latest issue of Raychem Specification 55PC.
|
Tyco Electronics
|
MQF21.4-1200 MQF21.4-02 MQF21.4-1200-02 MQF21.4-12 |
Monolithic crystal filter 单片晶体滤波 Monolithic Crystal Filter 10.7 MHz, Channel spacing 20 kHz From old datasheet system 1 FUNCTIONS, 21.4 MHz, 6 kHz BW(delta f), MONOLITHIC CRYSTAL FILTER
|
Vectron International, Inc. VECTRON[Vectron International, Inc] ETC[ETC] List of Unclassifed Manufacturers Electronic Theatre Controls, Inc.
|
HI1-565AJD-5 HI1-565AKD-5 HI1-565ASD_883 HI1-565AS |
From old datasheet system High Speed Monolithic D/A Converter with Reference High Speed, Monolithic D/A Converter with Reference CIRCUIT BREAKER High Speed/ Monolithic D/A Converter with Reference 64 MACROCELL 3.3 VOLT ISP CPLD - NOT RECOMMENDED for NEW DESIGN
|
INTERSIL[Intersil Corporation]
|
U4089B U4089B-M U4089B-MFN U4089B-MFNG3 |
Monolithic Integrated Feature Phone IC MONOLITHIC INTEGRATED FEATUREPHONE CIRCUIT
|
ATMEL[ATMEL Corporation]
|
749010013 744761068A |
All 16 terminals must lie on a plane within 004 of surface A after lead tinning specification for release specification for release
|
Wurth Elektronik GmbH & Co. KG, Germany. Wurth Elektronik GmbH &...
|