| PART |
Description |
Maker |
| IMST400 |
Low Cost 32-Bit Transputer
|
ST Microelectronics
|
| IMST805-F20E IMST805-G20E IMST805E |
32-bit floating-point transputer - xtended temperature
|
STMicroelectronics
|
| XCV150-5PQG240I XCV150-5PQG240C XCV300-5PQG240I XC |
XCV150-5PQG240I - NOT RECOMMENDED for NEW DESIGN FPGA, 864 CLBS, 164674 GATES, 294 MHz, PQFP240
XCV150-5PQG240C - NOT RECOMMENDED for NEW DESIGN FPGA, 864 CLBS, 164674 GATES, 294 MHz, PQFP240
XCV300-5PQG240I - NOT RECOMMENDED for NEW DESIGN FPGA, 1536 CLBS, 322970 GATES, 294 MHz, PQFP240
XCV50-5PQG240C - NOT RECOMMENDED for NEW DESIGN FPGA, 384 CLBS, 57906 GATES, 294 MHz, PQFP240
XCV200-5PQG240C - NOT RECOMMENDED for NEW DESIGN FPGA, 1176 CLBS, 236666 GATES, 294 MHz, PQFP240
XCV200-5PQG240I - NOT RECOMMENDED for NEW DESIGN FPGA, 1176 CLBS, 236666 GATES, 294 MHz, PQFP240
100,000 System Gate FPGA - NOT RECOMMENDED for NEW DESIGN FPGA, 600 CLBS, 108904 GATES, 294 MHz, PQFP240
XCV50-5PQG240I - NOT RECOMMENDED for NEW DESIGN FPGA, 384 CLBS, 57906 GATES, 294 MHz, PQFP240
XCV300-5PQG240C - NOT RECOMMENDED for NEW DESIGN FPGA, 1536 CLBS, 322970 GATES, 294 MHz, PQFP240
XCV150-5BGG352C - NOT RECOMMENDED for NEW DESIGN FPGA, 864 CLBS, 164674 GATES, 294 MHz, PBGA352
XCV800-5BGG560C - NOT RECOMMENDED for NEW DESIGN FPGA, 4704 CLBS, 888439 GATES, 294 MHz, PBGA560
100,000 System Gate FPGA - NOT RECOMMENDED for NEW DESIGN FPGA, 600 CLBS, 108904 GATES, 250 MHz, PBGA144
100,000 System Gate FPGA - NOT RECOMMENDED for NEW DESIGN FPGA, 600 CLBS, 108904 GATES, 333 MHz, PQFP144
100,000 System Gate FPGA - NOT RECOMMENDED for NEW DESIGN FPGA, 600 CLBS, 108904 GATES, 294 MHz, PBGA144
100,000 System Gate FPGA - NOT RECOMMENDED for NEW DESIGN FPGA, 600 CLBS, 108904 GATES, 250 MHz, PBGA256
100,000 System Gate FPGA - NOT RECOMMENDED for NEW DESIGN FPGA, 600 CLBS, 108904 GATES, 250 MHz, PQFP240
XCV200-6PQG240C - NOT RECOMMENDED for NEW DESIGN FPGA, 1176 CLBS, 236666 GATES, 333 MHz, PQFP240
XCV50-5CSG144C - NOT RECOMMENDED for NEW DESIGN FPGA, 384 CLBS, 57906 GATES, 294 MHz, PBGA144
XCV300-5BGG432C - NOT RECOMMENDED for NEW DESIGN
XCV300-5BGG432I - NOT RECOMMENDED for NEW DESIGN
XCV300-5BGG352C - NOT RECOMMENDED for NEW DESIGN
XCV600-5FGG680I - NOT RECOMMENDED for NEW DESIGN
XCV600-5BGG560I - NOT RECOMMENDED for NEW DESIGN
XCV150-4BGG352C - NOT RECOMMENDED for NEW DESIGN
XCV150-5BGG256C - NOT RECOMMENDED for NEW DESIGN
XCV300-4BGG432I - NOT RECOMMENDED for NEW DESIGN
|
Xilinx, Inc.
XILINX INC
|
| HI-8105 HI-8105PST HI-8105PSI HI-8105PDT HI-8105PD |
PROGRAMMABLE DIVIDER WITH OSC OR CLK SPECIALTY LOGIC CIRCUIT, CDIP8
128 MACROCELL 3.3 VOLT ZERO POWER ISP CP - NOT RECOMMENDED for NEW DESIGN SPECIALTY LOGIC CIRCUIT, CDIP8
128 MACROCELL 3.3 VOLT ISP CPLD - NOT RECOMMENDED for NEW DESIGN
256 MACROCELL 3.3 VOLT ISP CPLD - NOT RECOMMENDED for NEW DESIGN
|
HOLT INTEGRATED CIRCUITS INC
Holt Integrated Circuits, Inc.
HOLTIC[Holt Integrated Circuits]
|
| MIC915 MIC915BMM |
10000 SYSTEM GATE 3.3 VOLT LOGIC CELL AR - NOT RECOMMENDED for NEW DESIGN
10000 SYSTEM GATE LOGIC CELL ARRAY - NOT RECOMMENDED for NEW DESIGN
Dual 135MHz Low-Power Op Amp
|
Micrel Semiconductor,Inc.
|
| 2SA1316 |
TRANSISTOR (FOR LOW NOISE AUDIO AMPLIFIER/ RECOMMENDED FOR THE FIRST STAGES OF MC GEAD AMPLIFIERS)
TRANSISTOR (FOR LOW NOISE AUDIO AMPLIFIER, RECOMMENDED FOR THE FIRST STAGES OF MC GEAD AMPLIFIERS)
FOR LOW NOISE AUDIO AMPLIFIER APPLICATIONS AND RECOMMENDED FOR THE FIRST STAGES OF MC HEAD AMPLIFIERS
|
SMSC, Corp.
TOSHIBA[Toshiba Semiconductor]
|
| TBR-06-197 |
Recommended P.C.B. Layout
|
Major League Electronics
|
| 801-4 800 800-1 800-2 800-3 800-4 801-1 801-2 801- |
PROFET™: Smart High Side Switches; Package: PG-TO220-5; Channels: 1.0; RON @ Tj = 25°C : 220.0 mOhm; Recommended Operating Voltage Range: 4.7 - 42.0 V; IL(SC): 12.0 A; Diagnostic: digital
PROFET™: Smart High Side Switches; Package: PG-DSO-8; Channels: 1.0; RON @ Tj = 25°C : 200.0 mOhm; Recommended Operating Voltage Range: 6.0 - 52.0 V; IL(SC): 6.5 A; Diagnostic: digital
Voltage Range: 12.0 - 45.0 V; IL(SC): 2.1 A; Diagnostic: n.a.
PROFET™: Smart High Side Switches; Package: PG-SOT223-4; Channels: 1.0; RON @ Tj = 25°C : 1,500.0 mOhm; Recommended Operating Voltage Range: 4.9 - 60.0 V; IL(SC): 0.9 A; Diagnostic: n.a.
RECTIFIERS ASSEMBLIES THREE PHASE BRIDGES, 20-40 AMP, STANDARD HIGH EFFICIENCY, ESP
|
MICROSEMI[Microsemi Corporation]
|
| AN826 |
RECOMMENDED MINIMUM PADS FOR SC-70: 3-LEAD
|
Vishay Siliconix
|
| HAMLIN59160 HAMLIN59165 HAMLIN59170 |
RECOMMENDED LAND PATTERNS / PCB LAYDUTS
|
HAMLIN Position and Movement Sensor Solutions
|
| MIC94002 MIC94002BLM |
Dual P-Channel MOSFET Not Recommended for New Designs
|
Micrel Semiconductor
|
| MIC2525 MIC2525-1BM MIC2525-1BN MIC2525-2BM MIC252 |
USB Power Control Switch Not Recommended for New Designs 1-CHANNEL POWER SUPPLY SUPPORT CKT, PDSO8
USB Power Control Switch Not Recommended for New Designs 1-CHANNEL POWER SUPPLY SUPPORT CKT, PDIP8
Replaced by PT6523 :
|
Micrel Semiconductor, Inc.
Micrel Semiconductor,Inc.
MICREL[Micrel Semiconductor]
|
|
