| PART |
Description |
Maker |
| ALQ4003 |
Industry Standard ??Brick: 36V-75V Input / 50A Output Current
|
|
| ALQ15XX48X |
Industry Standard ? Brick: 36V-75V Input / 60W Output Power
|
Astec America, Inc
|
| AV60A-048L-033D025N AV60A-048L-050D033 AV60C-048L- |
DC-DC / Industry Standard Isolated Half Brick
|
Emerson
|
| LES13B48-5V0AJ LES13B48-5V0EJ LES13B48-5V0RAJ LES1 |
DC-DC / Industry Standard Isolated Eighth Brick
|
Emerson
|
| PQ60150HZW40XYZ-G |
Industry standard half-brick pin-out configuration
|
SynQor Worldwide Headqu...
|
| PQ60120EGW07XYS PQ60150EGW05XYS PQ60015EGW20XYS PQ |
Industry standard eighth-brick pin-out configuration
|
SynQor Worldwide Headqu...
|
| BQ57090EZB48XYZ-G |
Industry standard quarter-brick pin-out configuration
|
SynQor Worldwide Headqu...
|
| SHM-4860 SHM-4860MC SHM-4860MM SHM-4860/883 |
Industry-Standard, High-Speed .01% Sample-Hold Amplifiers
Industry-Standard, High-Speed 0.01% Sample-Hold Amplifiers 工业标准，高速0.01％采样保持放大器
|
Electronic Theatre Controls, Inc.
|
| MCP41010MCP42010 MCP41050-I/P MCP41050-E/SN MCP410 |
Single/Dual Digital Potentiometer with SPI?/a> Interface
Single/Dual Digital Potentiometer with SPIInterface 双数字电位器接口与SPI
The MCP42100 digital potentiometer features two independent channels, 8-bit resolution (256 wiper steps), and an industry-standard ...
The MCP42010 digital potentiometer features two independent channels, 8-bit resolution (256 wiper steps), and an industry-standard ...
The MCP41100 single-channel digital potentiometer features 8-bit resolution (256 wiper steps), and an industry-standard SPI™ ...
The MCP41010 single-channel digital potentiometer features 8-bit resolution (256 wiper steps), and an industry-standard SPI™ ...
The MCP42100 digital potentiometer features two independent channels, 8-bit resolution (256 wiper steps), and an industry-standard SPI™ serial interface. The wiper position varies linearly and is controlled via the SPI interface. The
The MCP42050 digital potentiometer features two independent channels, 8-bit resolution (256 wiper steps), and an industry-standard SPI™ serial interface. The wiper position varies linearly and is controlled via the SPI interface. The
The MCP42010 digital potentiometer features two independent channels, 8-bit resolution (256 wiper steps), and an industry-standard SPI™ serial interface. The wiper position varies linearly and is controlled via the SPI interface. The
The MCP41100 single-channel digital potentiometer features 8-bit resolution (256 wiper steps), and an industry-standard SPI™ serial interface. The wiper position varies linearly and is controlled via the SPI interface. The MCP41100 ha
The MCP41050 single-channel digital potentiometer features 8-bit resolution (256 wiper steps), and an industry-standard SPI™ serial interface. The wiper position varies linearly and is controlled via the SPI interface. The MCP41050 ha
The MCP41010 single-channel digital potentiometer features 8-bit resolution (256 wiper steps), and an industry-standard SPI™ serial interface. The wiper position varies linearly and is controlled via the SPI interface. The MCP41010 ha
400000 SYSTEM GATE 2.5 VOLT FPGA - NOT RECOMMENDED for NEW DESIGN
The MCP42050 digital potentiometer features two independent channels, 8-bit resolution (256 wiper steps), and an industry-standard ...
The MCP41050 single-channel digital potentiometer features 8-bit resolution (256 wiper steps), and an industry-standard SPI™ ...
IC,DIGITAL POTENTIOMETER,CMOS,DIP,8PIN,PLASTIC
Single/Dual Digital Potentiometer with SPI Interface
Single/Dual Digital Potentiometer with SPI?/a> Interface
Single/Dual Digital Potentiometer with SPI?Interface
|
Microchip Technology, Inc.
Microchip Technology Inc.
|
