PART |
Description |
Maker |
HL6363MG HL6362MG |
Low Operating Current Visible Laser Diode
|
OPNEXT[Opnext. Inc.]
|
HL6359MG HL6358MG |
Low Operating Current Visible Laser Diode
|
OPNEXT[Opnext. Inc.]
|
HL6332G HL6331G HL6331G/32G |
(HL6332G) Low Operating Current Visible Laser Diode
|
HITACHI[Hitachi Semiconductor]
|
MCP6041 MCP6043 MCP6044 MCP6042 MCP6044T MCP6041T |
The MCP6041 operational amplifier (op amp) has a gain bandwidth product of 14 kHz with a low typical operating current of 600 nA ... The MCP6044 quad operational amplifier (op amp) has a gain bandwidth product of 14 kHz with a low typical operating current of 600 ... The MCP6043 operational amplifier (op amp) has a gain bandwidth product of 14 kHz with a low typical operating current of 600 nA ... The MCP6042 dual operational amplifier (op amp) has a gain bandwidth product of 14 kHz with a low typical operating current of 600 ... 600 nA, Rail-to-Rail Input/Output Op Amps
|
MICROCHIP[Microchip Technology]
|
LP62S16256FU-70LLI LP62S16256FU-55LLI |
70ns; operating current:40mA; standby current:10uA; 256K x 16bit low voltage CMOS SRAM 55ns; operating current:40mA; standby current:10uA; 256K x 16bit low voltage CMOS SRAM
|
AMIC Technology
|
LP62S1024BX-55LLI LP62S1024BX-55LLIF |
55ns; operating current:30mA; standby current:5uA; 128K x 8bit low voltage CMOS SRAM
|
AMIC Technology
|
MCP1256 MCP1259T-EUN MCP1256-EMF MCP1256-EUN MCP12 |
Regulated 3.3V, Low-Ripple Charge Pump with Low-Operating Current SLEEP Mode or BYPASS Mode From old datasheet system Regulated 3.3V, Low-Ripple Charge Pump with Low- Operating Current SLEEP Mode or BYPASS Mode
|
Microchip Technology, Inc. MICROCHIP[Microchip Technology]
|
HH-1199-6C |
Operating Voltage: 125 / 250 v~ Operating Current (Max): 6.0 AMP
|
JMK Inc.
|
LL-1319-13M |
Operating Voltage = DC to 250 Vac Operating Current (Max)= 13A
|
JMK Inc.
|
MIC5326-2.8YMT |
150mA Low Operating Current LDO
|
Micrel Semiconductor
|
HL6340MG08 HL6340MG |
Circular Beam Low Operating Current
|
Agilent(Hewlett-Packard)
|