| PART |
Description |
Maker |
| AN2001 |
Designing Expansion Boards
|
Motorola, Inc.
|
| AN3978 |
Designing a digital output module
|
STMicroelectronics
|
| AN939 |
Designing Energy Meters with the PIC16F873A
|
Microchip Technology Inc.
|
| AN703 |
Designing DC/DC Converters with the Si9110 Switchmode Controller
|
Vishay
|
| AN1185 |
DESIGNING FOR COMPATIBILITY BETWEEN ST AND AMD FLASH MEMORIES
|
SGS Thomson Microelectronics
|
| AN-502 |
Designing a Superheterodyne Receiver Using an IF Sampling Diversity Chipset
|
Analog Devices
|
| AN667 |
DESIGNING A HIGH POWER FACTOR SWITCHING PREREGULATOR WITH THE L6560/A TRANSITION MODE I.C.
|
ST Microelectronics
|
| AN707 |
Designing Low-Power Off-Line Flyback Converters, using the Si9120 switchmode controller IC
|
Vishay
|
| CMX589AMX909AMX029 |
Using Two-Point Modulation to Reduce Synthesizer Problems When Designing DC-Coupled GMSK Modulators
|
CONSUMER MICROCIRCUITS LIMITED
|
| AN1498 |
ST9 - DESIGNING A THREE PHASE AC INVERTER CONTROL & INTERFACE BOARD WITH THE ST92141 MCU
|
SGS Thomson Microelectronics
|
| D1B121000 |
Dip type construction with the same terminal pitch as ICs or TTLs simplifies PC board designing.
|
COSMO[COSMO Electronics Corporation]
|
| AN729 |
Designing A High-Frequency, Higher-Power Buck/Boost Converter for Multi-Cell Input Configurations Using Si9168
|
Vishay
|
