| PART |
Description |
Maker |
| CY7C1041BNV33 CY7C1041BNV33L-12ZXC CY7C1041BNV33L- |
256 K x 16 Static RAM Low CMOS standby power 1.8 mW (max.)
|
Cypress Semiconductor
|
| TSV6391AILT TSV6390 TSV6390A TSV6390AICT TSV6390AI |
OP-AMP, 4500 uV OFFSET-MAX, 2 MHz BAND WIDTH, PDSO6
Micro-power CMOS op-amp with standby
|
STMICROELECTRONICS
ST Microelectronics
|
| ICE1QS01G |
Controller for Switch Mode Power Supplies Supporting Low Power Standby and Power Factor Correction (PFC)
|
Infineon Technologies AG
|
| LA4725 1531 |
2-Channel BTL Power Amplifier (30W 30W) with Standby Switch for Car Stereos(用于汽车立体声双BTL功率放大器（30W 30W，带备用开关）)
Monolithic Linear IC
From old datasheet system
2-Channel BTL Power Amplifier 30 W 30 W with Standby Switch for Car Stereos
|
Sanyo Electric Co.,Ltd.
Sanyo Semicon Device
|
| TSX920 TSX920ILT TSX921 TSX921ILT TSX921IYLT TSX92 |
10MHz, rail-to-rail 16V CMOS op-amps with standby
|
ST Microelectronics
|
| A615308S-10 A615308V-10 |
10ns; operating current:150mA; standby current: 12mA 32K x 8bit high speed CMOS SRAM
|
AMIC Technology
|
| LP62S16256FU-55LLT |
55ns; operating current:40mA; standby current:10uA; 256K x 16bit low voltage CMOS SRAM
|
AMIC Technology
|
| AT29LV1024 AT29LV1024-15TC |
1 Megabit (64K X 16) 3-volt Only CMOS Flash Memory,15mA Active Current,0.05mA Standby Current
From old datasheet system
|
ATMEL
|
| AN8027 AN8037 |
AC-DC switching power supply control IC with standby mode
|
PANASONIC[Panasonic Semiconductor]
|
