| PART |
Description |
Maker |
| U74LVC574L-P20-R U74LVC574L-R20-R U74LVC574L-S20-R |
OCTAL EDGE-TRIGGERED D-TYPE FLIP-FLOPS WITH 3-STATE OUTPUTS
LVC/LCX/Z SERIES, POSITIVE EDGE TRIGGERED D FLIP-FLOP, TRUE OUTPUT, PDSO20
|
UNISONIC TECHNOLOGIES CO LTD
|
| 74AUP2G80GN 74AUP2G80GD |
Low-power dual D-type flip-flop; positive-edge trigger AUP/ULP/V SERIES, DUAL POSITIVE EDGE TRIGGERED D FLIP-FLOP, INVERTED OUTPUT, PDSO8
Low-power dual D-type flip-flop; positive-edge trigger 低功耗双D型触发器;上升沿触
|
NXP Semiconductors N.V.
|
| 74ALVT16821 74ALVT16821DGG 74ALVT16821DL AV16821DL |
positive-edge trigger (3-State)
20-bit bus-interface D-type flip-flop; positive-edge trigger 3-State
|
PHILIPS[Philips Semiconductors]
NXP Semiconductors
|
| 74LV574 74LV574_2 74LV574D 74LV574PWDH 74LV574DB 7 |
positive edge-trigger (3-State)
From old datasheet system
Octal D-type flip-flop; positive edge-trigger 3-State
|
PHILIPS[Philips Semiconductors]
NXP Semiconductors
|
| 74AUP2G79GF 74AUP2G79GS |
Low-power dual D-type flip-flop; positive-edge trigger AUP/ULP/V SERIES, DUAL POSITIVE EDGE TRIGGERED D FLIP-FLOP, TRUE OUTPUT, PDSO8
|
NXP Semiconductors N.V.
|
| 74ABT821 74ABT821D 74ABT821DB 74ABT821N 74ABT821PW |
positive-edge trigger (3-State)
10-bit D-type flip-flop; positive-edge trigger 3-State
|
PHILIPS[Philips Semiconductors]
NXP Semiconductors N.V.
|
| ISL6293 ISL6293-2CR-T ISL6293-2CR ISL6293-2CRZ ISL |
Dual Positive-Edge-Triggered D-Type Flip-Flops With Clear and Preset 14-SOIC -40 to 85
Dual Positive-Edge-Triggered D-Type Flip-Flops With Clear and Preset 14-PDIP -40 to 85
Dual Positive-Edge-Triggered D-Type Flip-Flops With Clear and Preset 14-SO -40 to 85 1-CHANNEL POWER SUPPLY SUPPORT CKT, PDSO10
Li-ion/Li Polymer Battery Charger Accepting Two Power Sources
|
Intersil, Corp.
INTERSIL[Intersil Corporation]
|
| 271-00-100DS1-90 271-00-112DS1-23 275-00-050DS1-90 |
100 CONTACT(S), FEMALE, STRAIGHT SINGLE PART CARD EDGE CONN, SOLDER
112 CONTACT(S), FEMALE, STRAIGHT SINGLE PART CARD EDGE CONN, SOLDER
50 CONTACT(S), FEMALE, STRAIGHT SINGLE PART CARD EDGE CONN, SOLDER
184 CONTACT(S), FEMALE, STRAIGHT SINGLE PART CARD EDGE CONN, SOLDER
50 CONTACT(S), FEMALE, STRAIGHT SINGLE PART CARD EDGE CONN, SURFACE MOUNT
40 CONTACT(S), FEMALE, STRAIGHT SINGLE PART CARD EDGE CONN, SOLDER
80 CONTACT(S), FEMALE, STRAIGHT SINGLE PART CARD EDGE CONN, SOLDER
|
METHODE ELECTRONICS INC
|
| CY-12-OAP CY-60-OHN CY-10-OFB CY-10-OAB CY-50-OBJ |
SINGLE PART CARD EDGE CONN
100 CONTACT(S), FEMALE, STRAIGHT SINGLE PART CARD EDGE CONN, SOLDER
|
|
| NE2002VA10A A5800561 NE2002-VA10A |
Near edge thermal printhead (8 dots / mm)
Thermal Printheads > Fro Plastic Card > NE200*-, 300*-VA@ Series
Near edge thermal printhead (8 dots/mm)
From old datasheet system
|
ROHM[Rohm]
Rohm CO.,LTD.
|
| T74LS113AD1 T74LS113AC1 T74LS113AM1 T74LS113AB1 |
LS SERIES, DUAL NEGATIVE EDGE TRIGGERED J-K FLIP-FLOP, COMPLEMENTARY OUTPUT, CDIP14 CERAMIC, DIP-14
LS SERIES, DUAL NEGATIVE EDGE TRIGGERED J-K FLIP-FLOP, COMPLEMENTARY OUTPUT, PQCC20 PLASTIC, LCC-20
LS SERIES, DUAL NEGATIVE EDGE TRIGGERED J-K FLIP-FLOP, COMPLEMENTARY OUTPUT, PDSO14 MICRO, SO-14
LS SERIES, DUAL NEGATIVE EDGE TRIGGERED J-K FLIP-FLOP, COMPLEMENTARY OUTPUT, PDIP14 PLASTIC, DIP-14
|
ST Microelectronics
|
| MC74F112 MC74F112D MC74F112J MC74F112N ON1232 |
1.2 to 5.5 V 10-A, 12-V Input Non-Isolated Wide-Adjust Module 10-DIP MODULE -40 to 85 F/FAST SERIES, DUAL NEGATIVE EDGE TRIGGERED J-K FLIP-FLOP, COMPLEMENTARY OUTPUT, PDSO16
DUAL JK NEGATIVE EDGE-TRIGGERED FLIP-FLOP 双JK负边沿触发器
From old datasheet system
|
Motorola Mobility Holdings, Inc.
MOTOROLA[Motorola, Inc]
|
