| PART |
Description |
Maker |
| MC74HCT273ADW MC74HCT273ADWR2 MC74HCT273AN HCT273 |
LAMINATED LABEL, 3/4-INCH BLK/YEL RoHS Compliant: Yes HCT SERIES, POSITIVE EDGE TRIGGERED D FLIP-FLOP, TRUE OUTPUT, PDSO20
Octal D Flip-Flop with Common Clock and Reset with LSTTL-Compatible Inputs
Octal D-Type Flip-Flop
|
ONSEMI[ON Semiconductor]
|
| 74ABT534APWDH 74ABT534A 74ABT534AD 74ABT534ADB 74A |
Octal D-type flip-flop, inverting 3-State ABT SERIES, 8-BIT DRIVER, INVERTED OUTPUT, PDSO20
From old datasheet system
Octal D-type flip-flop, inverting (3-State)
|
NXP Semiconductors N.V.
IRF[International Rectifier]
Philips
|
| 74ALVC574 74ALVC574_1 74ALVC574PW 74ALVC574D |
Octal D-type flip-flop; positive
From old datasheet system
Octal D-type flip-flop positive edge-trigger 3-state
|
PHILIPS[Philips Semiconductors]
|
| MC74LVX374DWR2 MC74LVX374DWR2G MC74LVX374MG 74LVX3 |
Octal D-Type Flip-Flop with 3-State Outputs; Package: TSSOP 20 LEAD; No of Pins: 20; Container: Tape and Reel; Qty per Container: 2500 LV/LV-A/LVX/H SERIES, 8-BIT DRIVER, TRUE OUTPUT, PDSO20
Octal D-Type Flip-Flop with 3-State Outputs With 5V−Tolerant Inputs
|
ONSEMI[ON Semiconductor]
|
| M81016FP M81016KP M81016P M81016P09 |
81016 SERIES, POSITIVE EDGE TRIGGERED D FLIP-FLOP, INVERTED OUTPUT, PDSO20
OCTAL D-TYPE FLIP-FLOP DRIVER WITH CLEAR
|
Mitsubishi Electric Semiconductor
Mitsubishi Electric Sem...
|
| ACS374DMSR ACS374D ACS374HMSR FN3997 ACS374MS ACS3 |
Radiation Hardened Octal D Flip-Flop/ Three-State
Radiation Hardened Octal D Flip-Flop, Three-State
From old datasheet system
Radiation Hardened Octal D Flip-Flop Three-State
D Flip Flop, Octal, Tri-State, Rad-Hard, Advanced Logic, CMOS
|
INTERSIL[Intersil Corporation]
|
| 74ABT273A 74ABT273AD 74ABT273ADB 74ABT273AN 74ABT2 |
Octal D-type flip-flop D FLIP-FLOP, PDSO20
From old datasheet system
|
NXP Semiconductors N.V.
PHILIPS[Philips Semiconductors]
|
| IDT74LVC374ASO IDT74LVC374A IDT74LVC374APG IDT74LV |
3.3V CMOS OCTAL EDGE-TRIGGERED D-TYPE FLIP-FLOP WITH 3-STATE OUTPUTS, 5V TOLERANT I/O
3.3V CMOS Octal Edge-Triggered D-Type Flip-Flop with 3-State Outputs, 5.0V Tolerant I/O
3.3V CMOS OCTAL EDGE-TRIGGERED D-TYPE FLIP-FLOP WITH 3-STATE OUTPUTS AND 5 VOLT TOLERANT I/O
From old datasheet system
3.3V CMOS OCTAL EDGE-TRIGGERED D-TYPE FLIPFLOP
|
IDT[Integrated Device Technology]
|
| MC74VHCT540A06 MC74VHCT541ADWG MC74VHCT541A06 MC74 |
Octal Bus Buffer
Octal D?Type Latch with 3?State Output
Octal D?Type Flip?Flop with 3?State Output
Octal D−Type Flip−Flop with 3−State Output
|
ONSEMI[ON Semiconductor]
|
| 74ACTQ374SJ 74ACQ374 74ACQ374_07 74ACQ374SC 74ACQ3 |
Quiet Series Octal D-Type Flip-Flop with 3-STATE Outputs
Quiet Series⑩ Octal D-Type Flip-Flop with 3-STATE Outputs
|
FAIRCHILD[Fairchild Semiconductor]
|
| 74HC574 74HC574N 74HCT574 74HC574PW 74HCT574D 74HC |
74HC/HCT574; Octal D-type flip-flop; positive edge-trigger; 3-state
Octal D-type flip-flop positive edge-trigger 3-state
|
NXP Semiconductors
PHILIPS[Philips Semiconductors]
|
