| PART |
Description |
Maker |
| FLL600IQ-2 |
PUSH-PULL CONFIGURATION, BROAD FREQUENCY RANGE: 800 TO 2000 MHZ, SUITABLE FOR CLASS AB OPERATION
|
Fujitsu Component Limited.
|
| FLL600IQ-2 |
Push-Pull Configuration, Broad Frequency Range: 800 to 2000 MHz, Suitable for class AB operation
Push-Pull Configuration / Broad Frequency Range: 800 to 2000 MHz / Suitable for class AB operation
|
Fujitsu Media Devices Limited
|
| L293C 1329 |
PUSH-PULL FOUR CHANNEL/DUAL H-BRIDGE DRIVER
PUSH-BRIDGE DRIVER PUSH-PULL FOUR CHANNEL/DUAL
From old datasheet system
|
ST Microelectronics
STMICROELECTRONICS[STMicroelectronics]
|
| RFPP3870 |
GaAs/GaN Push Pull Hybrid GaAs/GaN Push Pull Hybridz
|
RF Micro Devices
|
| MCP6542 MCP6542-I/MS MCP6542-I/P MCP6542-I/SN MCP6 |
The MCP6544 is a Push-pull, quad comparator. This single-ended device operates from 1.6V to 5.5V,with typical quiescent current of ...
The MCP6541 is a Push-pull, single comparator. This single-ended device operates from 1.6V to 5.5V, with typical quiescent current ...
Push-Pull Output Sub-Microamp Comparators
The MCP6544 is a Push-pull, quad comparator. This single-ended device operates from 1.6V to 5.5V, with typical quiescent current of 600 nA and a maximum of 1 microamp. This device is offered in the 16 lead PDIP, SOIC and 14 lead TSSOP pack
The MCP6543 is a Push-pull, single comparator. This single-ended device operates from 1.6V to 5.5V, with typical quiescent current of 600 nA and a maximum of 1 microamp. This device is offered in the eight lead PDIP, SOIC and MSOP package,
The MCP6542 is a Push-pull, dual comparator. This single-ended device operates from 1.6V to 5.5V, with typical quiescent current of 600 nA and a maximum of 1 microamp. This device is offered in the eight lead PDIP, SOIC and MSOP package.
The MCP6541 is a Push-pull, single comparator. This single-ended device operates from 1.6V to 5.5V, with typical quiescent current of 600 nA and a maximum of 1 microamp. This device is offered in the eight lead PDIP, SOIC, MSOP and five le
The MCP6543 is a Push-pull, single comparator. This single-ended device operates from 1.6V to 5.5V,with typical quiescent current ...
The MCP6542 is a Push-pull, dual comparator. This single-ended device operates from 1.6V to 5.5V,with typical quiescent current of ...
From old datasheet system
IC,VOLT COMPARATOR,DUAL,CMOS,TSSOP,8PIN,PLASTIC
|
Microchip Technology Inc.
|
| POD3-R-DFS111 HRMJ-POD3P POD3-J-DFS111 POD3-PR-1 P |
BOARD TERMINATED, FEMALE, RF CONNECTOR, RECEPTACLE
Push-Pull Complete Locking Coaxial Connectors (PC Card Type 2 Mountable) 推挽式总锁定同轴连接器（PC卡类挂墙
Push-Pull Complete Locking Coaxial Connectors (PC Card Type 2 Mountable)
|
HIROSE[Hirose Electric]
Hirose Electric USA, INC.
HIROSE ELECTRIC Co., Ltd.
|
| LTC1450CN LTC1450LCN LTC1450CG |
Parallel Input, 12-Bit Rail-to-Rail Micropower DACs in SSOP
Quad, Micropower, Push-Pull Outputs, LinCMOS(TM) Voltage Comparator 14-TSSOP 0 to 70
Quad, Micropower, Push-Pull Outputs, LinCMOS(TM) Voltage Comparator 14-SOIC 0 to 70 PARALLEL, WORD INPUT LOADING, 14 us SETTLING TIME, 12-BIT DAC, PDSO24
|
Linear Technology Corporation
Linear Technology, Corp.
|
| MCH6542 |
Push-Pull Circuit Applications
|
Sanyo Semicon Device
|
| DS1815 DS1815-5 DS1815-10 DS1815-15 DS1815R-5TR DS |
3.3V EconoReset with Push-Pull Output
|
DALLAS[Dallas Semiconductor]
MAXIM - Dallas Semiconductor
|
| AG606 AG606-G AG606-PCB |
Push-Pull CATV Amplifier
|
Electronic Theatre Controls, Inc.
List of Unclassifed Manufacturers
|
| S8740200P |
GaAs Push Pull Hybrid
|
PDI
|
