| |
|
 |
LINER[Linear Technology]
|
| Part No. |
LTC4354 LTC4354CS8 LTC4354IS8 LTC4354IDDB LTC4354CDDB
|
| OCR Text |
...istor is turned on. The LTC4354 servos the voltage drop across the pass transistors to ensure smooth transfer of current from one transistor to the other without oscillation. The MOSFETs are turned off in less than 1s whenever the correspon... |
| Description |
Negative Voltage Diode-OR Controller and Monitor
Controller Miscellaneous
|
| File Size |
124.60K /
12 Page |
 View
it Online |
Download Datasheet
|
| |
|
|
Linear
|
| Part No. |
LTC4400-2
|
| OCR Text |
...rives this input. The amplifier servos the RF power until the RF detected signal equals the DAC signal. The input impedance is typically 90k. VPCB (Pin 3): (LTC4400-2 Only) Power Control Voltage Output. This pin drives an external RF power ... |
| Description |
Dual RF Power Controller with 450kHz Loop BW (800MHz to 2Gz)
|
| File Size |
184.23K /
16 Page |
View
it Online |
Download Datasheet |
| |
|
|
Linear
|
| Part No. |
LTC4401-2 LTC4401-1
|
| OCR Text |
...rives this input. The amplifier servos the RF power until the RF detected signal equals the DAC signal. The input impedance is typically 90k. VPCB (Pin 3): (LTC4401-2 Only) Power Control Voltage Output. This pin drives an external RF power ... |
| Description |
Dual RF Power Controller with 450kHz Loop BW (800MHz to 2GHz)
ThinSOT RF Power Controller with 450kHz Loop BW (800MHz to 2.7GHz)
|
| File Size |
184.76K /
16 Page |
View
it Online |
Download Datasheet |
| |
|
|
Linear
|
| Part No. |
LTC4403-2 LTC4403-1
|
| OCR Text |
...rives this input. The amplifier servos the RF power until the RF detected signal equals the DAC signal applied at this pin. SHDN (Pin 6/7): Shutdown Input. A logic low on the SHDN pin places the part in shutdown mode. A logic high enables t... |
| Description |
Multiband RF Power Controllers for EDGE/TDMA
|
| File Size |
196.02K /
12 Page |
View
it Online |
Download Datasheet |
| |
|
|
Linear Technology Corp
|
| Part No. |
LT1616ES6
|
| OCR Text |
...d to the FB pin. This amplifier servos the switch current to regulate the FB pin voltage to 1.25V. An active clamp on the VC node provides current limit. An internal regulator provides power to the control circuitry. This regulator includes... |
| Description |
Analog IC - Datasheet Reference
From old datasheet system
|
| File Size |
236.17K /
16 Page |
View
it Online |
Download Datasheet |
| |
|
|
Linear
|
| Part No. |
LTC1735-1 17351I
|
| OCR Text |
... tested in a feedback loop that servos VOSENSE to the balance point for the error amplifier (VITH = 1.2V). Note 4: The minimum on-time condition corresponds to an inductor peak-to-peak ripple current > 40% of IMAX (see Minimum On-Time Consi... |
| Description |
High Efficiency Synchronous Step-Down Switching Regulator
From old datasheet system
|
| File Size |
195.70K /
20 Page |
View
it Online |
Download Datasheet |
|
Price and Availability
|
