|
|
|
MAXIM - Dallas Semiconductor
|
Part No. |
DS21Q348DK
|
OCR Text |
...rd. * Supply 3.3V to the banana-plug receptacles marked GND and VCC_3.3V. (The external 5V connector is unused. Additionally, the TIM 5V supply headers are unused.) * All processor-board DIP switch settings should be in the ON position with... |
Description |
3.3V E1/T1/J1 Line Interface Design Kit Daughter Card
|
File Size |
787.04K /
17 Page |
View
it Online |
Download Datasheet |
|
|
|
Maxim
|
Part No. |
DS26528DK
|
OCR Text |
... and reattaching the VCC banana plug. The removal/reattach of the VCC banana plug results in a faster slew rate on VCC than simply cycling the power supply.
3 of 36
RJ 45 x 4
2.5V FPGA SUPPLY
BNC PORT 3
RJ 45 x 4
BNC PORT ... |
Description |
Octal T1/E1/J1 Transceiver Design Kit Daughter Card
|
File Size |
1,585.58K /
36 Page |
View
it Online |
Download Datasheet |
|
|
|
Maxim
|
Part No. |
MAX4411EVKIT
|
OCR Text |
...nd 2 of jumpers JU1 and JU2. 1) Plug the headphones into the 3.5mm headphone jack. 3) Ensure that the stereo audio source is turned off. 4) Connect the disabled audio source between IN_ and GND. 5) Connect the 1.8V to 3.6V DC power supply t... |
Description |
Evaluation Kit for the MAX4411
|
File Size |
505.20K /
4 Page |
View
it Online |
Download Datasheet |
|
|
|
Maxim
|
Part No. |
MAX9721EVKIT
|
OCR Text |
...y * Stereo headphone with 3.5mm plug * Audio source (i.e., CD player, cassette player) 1) Verify that JU1 has a shunt across pins 1 and 2 (SHDN = VDD). 2) Plug the stereo headphone into the OUT jack. 3) Connect the 1.5V power supply to the ... |
Description |
Evaluation Kit for the MAX9721
|
File Size |
601.64K /
3 Page |
View
it Online |
Download Datasheet |
|
|
|
Maxim
|
Part No. |
DS26502DK
|
OCR Text |
...right-angle PCMT Socket, banana plug, horizontal, black Socket, banana plug, horizontal, red Terminal strip, 16-pin, dual row, vertical DB9 ...jack, right-angle 100-mil, 2 position jumper 14-pin header, remove 'missing pin' Inductor, 22.0mH 2-... |
Description |
T1/E1/J1/64KCC Bits Element Design Kit
|
File Size |
1,357.28K /
30 Page |
View
it Online |
Download Datasheet |
|
|
|
MAXIM - Dallas Semiconductor
|
Part No. |
DS5000TK 5000TK
|
OCR Text |
...ill not work properly. The RJ11 plug should then be inserted into the RJ11 jack on the RS-232 fixture. Finally, the 40pin Target Cable should be connected between the edge connector of the RS-232 fixture and the 40-pin socket of the target ... |
Description |
From old datasheet system Microcontroller Evaluation Kit
|
File Size |
47.20K /
5 Page |
View
it Online |
Download Datasheet |
|
|
|
MAXIM - Dallas Semiconductor
|
Part No. |
MAX1736EVKIT
|
OCR Text |
...low for board operation. Do not plug in the wall cube to the AC voltage source until step 4: 1) Verify that a shunt is not across jumper JU1...jack (J1). 3) Place a voltmeter across the BATT+ pad and BATTpad. 4) Plug in the wall adapter and ve... |
Description |
Evaluation Kit for the MAX1736
|
File Size |
93.46K /
3 Page |
View
it Online |
Download Datasheet |
|
|
|
Maxim
|
Part No. |
MAX5026EVKIT
|
OCR Text |
...if any) to the VOUT pad (and/or plug an oscilloscope probe into the oscilloscope jack). Connect a +3V to +11V power supply to the VIN pad. Connect the power-supply ground to the GND pad closest to VIN. Turn on the power supply and verify th... |
Description |
Evaluation Kit for the MAX5025/MAX5026/ MAX5027/MAX5028
|
File Size |
118.13K /
4 Page |
View
it Online |
Download Datasheet |
|
Price and Availability
|