| |
|
 |
AAT
|
| Part No. |
AAT2504
|
| OCR Text |
... the converter. must be closely decoupled. 11, 12 n/c not connected. 13 vin bias supply. supply power for the internal circuitry. connect to input power via low pass filter with decoupling to agnd. 14 en enable for the step-down converter. ... |
| Description |
Adjustable 3-Channel Regulator
|
| File Size |
963.77K /
22 Page |
View
it Online |
Download Datasheet
|
| |
|
 |
Renesas Electronics, Corp.
|
| Part No. |
REJ03F0087-0100Z
|
| OCR Text |
...er bias 1st mixer bias voltage. decoupled to ground with capacitor. 5 swout sw output dc power supply to the external rf circuit. 6 rvgnd2 rx vco ground 2 dc ground for rx vco. 7 rxla2 rx vco la2 rx vco amplifier output a2. connect to induc... |
| Description |
RF Transceiver for Short-range Wireless 射频收发器的短距离无
|
| File Size |
446.51K /
28 Page |
View
it Online |
Download Datasheet
|
| |
|
 |
Aptina Imaging Corporation
|
| Part No. |
MT9N011
|
| OCR Text |
...th power supply rails should be decoupled from ground using capacitors as close as possible to the die. the use of inductance filters is not recommended on the power supplies or output signals. the mt9n011 also supports different digital ... |
| Description |
9Mp CMOS Active-Pixel Digital Image Sensor Die
|
| File Size |
743.70K /
17 Page |
View
it Online |
Download Datasheet
|
| |
|
 |
Aptina Imaging Corporation
|
| Part No. |
MT9N011
|
| OCR Text |
...th power supply rails should be decoupled from ground using capacitors as close as possible to the die. the use of inductance filters is not recommended on the power supplies or output signals. the mt9n011 also supports different digital ... |
| Description |
9Mp CMOS Active-Pixel Digital Image Sensor
|
| File Size |
741.12K /
17 Page |
View
it Online |
Download Datasheet
|
| |
|
 |
Analog Devices, Inc.
|
| Part No. |
EVAL-AD7898CB
|
| OCR Text |
...d +5v systems. the supplies are decoupled to the relevant ground plane with 10f tantalum and 0.1f multilayer ceramic capacitors at the point where they enter the board. the supply pins of all the op-amps and refer- ence are also decoupled ... |
| Description |
Evaluation Board for 5V, 12-Bit, Serial 220kSPS ADC in 8-Pin Package 评估板为5V2位,串行220kSPS ADC8引脚封装
|
| File Size |
425.50K /
13 Page |
View
it Online |
Download Datasheet
|
| |
|
 |
Winbond Electronics
|
| Part No. |
W6612CF-44
|
| OCR Text |
... at 5 volt. this pin should be decoupled to gndd with a 0.1 f capacitor. vdsp 39 o this is the output of the on-chip 2.7 volt regulator which supplies the digital circuit of the chip. this pin should be decoupled to gnda2 with a 0.1 f ... |
| Description |
Dual Channel PCM Codec
|
| File Size |
167.28K /
21 Page |
View
it Online |
Download Datasheet
|
| |
|
 |
http:// Advanced Analogic Techn...
|
| Part No. |
AAT2603INJ-2-T1 AAT2603INJ-1-T1 AAT2603INJ-3-T1
|
| OCR Text |
... ldo3 output. should be closely decoupled to agnd with a 4.7 f or greater capacitor. 8 inl34 ldo3 and ldo4 input. should be closely decoupled to agnd with a 2.2 f or greater capacitor. 9 outl4 ldo4 output. should be closely decoupled to a... |
| Description |
Total Power Solution for Portable Applications
|
| File Size |
3,824.27K /
26 Page |
View
it Online |
Download Datasheet
|
|

Price and Availability
|